Open side-bar Menu
 GISCafe Voice

Archive for the ‘asset management’ Category

LGS Innovations Has Proactive Strategy to Fight Network Attacks

Thursday, August 18th, 2016

Network attacks of all kinds are on the rise, and it is imperative that organizations deploy a proactive, defense-in-depth strategy that addresses all layers of the network.

LGS Innovations recognizes the importance of network-level software integrity as a component of the larger network security ecosystem. With a dedication to the evolution of enterprise support born from extensive experience deploying secure, mission-critical switching solutions, LGS Innovations offers CodeGuardian™: a solution that hardens network devices at both the software source code and binary executable levels to enhance overall network security.

Through a partnership with Alcatel-Lucent Enterprise (ALE), worldwide enterprise communications organization, the LGS CodeGuardian solution has been applied to ALE’s OmniSwitch family of products, to harden these network devices at both the software source code and binary executable levels within. David Lau, software engineer manager, Product, Solutions and Applications, said the company has a long heritage with Bell Labs. They recently purchased Axios, a traditional networking group.

(more…)

From the Exhibit Floor: Esri UC 2016

Friday, July 8th, 2016

What was the most exciting attraction in the Exhibit Hall at the Esri User Conference 2016? Hard to say, as the 14,000+ attendees flocked to see the plethora of exciting exhibits from third party companies, and of course the numerous demonstrations of Esri products and services. Drones, imagery, field solutions, utilities, navigation, spatially enabled business apps, data management, all vied for an audience at the conference. Esri’s Drone2Map was a huge hit, and Collector for ArcGIS was a product that garnered an enormous amount of attention at its demonstrations and technical workshops, offering the promise of providing mapping to professionals in the field workforce that would in turn, improve the accuracy and currency of spatial data.

IMG_5395

Esri’s Drone2Map

(more…)

GISCafe Voice Esri User Conference 2016 Report

Saturday, July 2nd, 2016

The question: what do we do with all this data? Is one that really runs parallel with the theme of this year’s Esri User Conference held in San Diego, entitled, “GIS Enabling a Smarter World.”

Jack Dangermond, CEO and President of Esri

Jack Dangermond, CEO and President of Esri

(more…)

Horizontal Location Intelligence and Growing Global Presence at Pitney Bowes

Wednesday, June 1st, 2016

Joe Francica, managing director of Geospatial Industry Solutions, Digital Commerce Solutions for Pitney Bowes talked about the company’s focus on the launch of horizontal location intelligence, while at GEOINT Symposium 2016 a week ago.

Spectrum Spatial Analyst

Spectrum Spatial Analyst

(more…)

From the Exhibit Hall: GEOINT Symposium 2016

Thursday, May 26th, 2016

The GEOINT Symposium 2016 attracted a great many exhibitors all focused on providing excellent resources for the geo-intelligence community. Tools for mobility, analytics, cloud, open source, business and location intelligence, moving data back and forth between unclassified and top security listings, and much more abound in this showcase of commercial offerings.

IMG_5117 (more…)

How to Integrate Data Capture, BIM, CIM, GIS and CAD

Wednesday, May 4th, 2016

At an industry session held at SPAR3D 2016 in April in The Woodlands, Texas, Steve Hutsell, Chief, Geospatial Section U.S. Army Corps of Engineers (USACE), Seattle District, and Lou Bush, Director of Survey, Bowman Consulting Group, gave a talk entitled: “Integrated Data Capture, BIM, CIM, GIS and CAD – Owner and Industry Perspectives on Products, Processes and Policies for Informed Decision Making.”

CIMmodel (more…)

From the Exhibit Hall: SPAR3D 2016

Wednesday, April 20th, 2016

Those I spoke to at SPAR3D 2016 last week were amazed at the progress the 3D laser scanning/reality capture products had made over just one year. Many people attended in order to find out if the technology would be right for their organization and what it would entail in terms of a learning curve, and of course, how much it would cost.

SPAR 3D scanning mobile unit from Surphaser

SPAR 3D scanning mobile unit from Surphaser

(more…)

SPAR3D 2016 Expo and Conference Special Report

Thursday, April 14th, 2016

The four morning keynotes kicking off SPAR3D 2016 Expo and Conference in The Woodlands, Texas, Tuesday morning included Eddie Paddock, Engineering/VR Technical Discipline lead, NASA Johnson Space Center, Greg Bentley, CEO Bentley Systems, Inc., David Smith, CTO, Wearality, and Curtis Chan, technical evangelist, Autodesk.

Google Cardboard

Google Cardboard

(more…)

COP21 of the U.N. Framework Convention Form Agreement on Climate Change Action

Saturday, February 13th, 2016

In December 2015, an historic agreement was reached among 195 nations in Paris at the the 21st Conference of the Parties (COP21) of the U.N. Framework Convention on Climate Change (UNFCC) to combat climate change and work towards a low carbon, resilient future, calling to keep global average temperature increase well below 2 degrees C, and to drive efforts to limit the temperature increase even further to 1.6 degrees Celsius above pre-industrial levels.

Ed Mazria presenting the China Accord at the UNFCCC COP21 Buildings Day

Ed Mazria presenting the China Accord at the UNFCCC COP21 Buildings Day

According the CEO and founder of Architecture 2030, Edward Mazria, who attended the conference, “it was incredible. For the first time governments came together to agree on a long term goal committed to keep global average temperature increase ‘well below 2°C above pre-industrial levels and to pursue efforts to limit the temperature increase to 1.5°C.’ What that means is we have to essentially end the fossil fuel era. We have to phase out all fossil fuel CO2 emissions by about 2050 and total emission by 2060-2080. We need to phase out CO2 emissions from power and industrial sectors by about 2050. There’s some leeway on each side of that depending upon the science and then during our total agreements emissions 2080.”
The agreement also aims to strengthen the ability to deal with the impacts of climate change, such as shorelines, melting polar ice, and health hazards, to name a few.

“The Paris Agreement allows each delegation and group of countries to go back home with their heads held high,” said Laurent Fabius, president of COP21 UN Climate Change Conference and French Foreign Minister.

French President Francois Hollande told the assembled delegates: “You’ve done it, reached an ambitious agreement, a binding agreement, a universal agreement. Never will I be able to express more gratitude to a conference. You can be proud to stand before your children and grandchildren.”
According to a conference press release, the agreement commits all countries to “aim to reach global peaking of greenhouse gas emissions as soon as possible . . . and to undertake rapid reductions thereafter.” It includes 188 national government submissions – Intended Nationally Determined Contributions (INDCs) – containing the actions each country intends to take to reduce greenhouse gas (GHG) emissions.
Mazria says that these initial INDCs submit to the UNFCC, what they are going to do to lower their emissions and reduce GHG. Given their particular circumstances. In the agreement, they have all agreed to a review every five years and to increase their targets and the reduction targets. The current U.S. INDC pledge is to reduce greenhouse gas emissions 26% to 28% below 2005 levels by 2025.
“Right now if you add up all the INDCs it doesn’t limit the global temperatures by 2 degrees. The idea was to start out with the first INDCs commitment pledge and then to review those pledges every five years and increase the reductions,” says Mazria. “It’s now verified reductions and its all made public. There will be a lot of pressure on the countries to not only meet their commitments but increase their obligations in time.”

The most important thing this agreement does is 1) it lays out publicly what each country is going to do and 2) it sends a message to the markets that this is where the world is headed, Mazria points out. This will shape how building and developing take place and also what kind of power will be used if all emissions must be phased out by the middle of the second half of the century, CO2 emissions by about 2050.

 Chen Zhen, Secretary General of CEDAAB (left) and Leon Qiu, Vice Secretary General of CEDAAB and Principal at DLR Group


Chen Zhen, Secretary General of CEDAAB (left) and Leon Qiu, Vice Secretary General of CEDAAB and Principal at DLR Group

Both developed and developing nations signed on. China has huge problems with pollution and a huge energy demand as a result of their fast infrastructure growth.

(more…)

Calling all Participants: February Topic – the Cloud and Collaboration

Friday, February 5th, 2016

A topic coming up for February on GIS Voice:

the Cloud and Collaboration

Toronto map

Toronto map

 

(more…)

Trimble
Teledyne Optech
Textron
CADalog.com - Countless CAD add-ons, plug-ins and more.



Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
TechJobsCafe - Technical Jobs and Resumes EDACafe - Electronic Design Automation GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy