Open side-bar Menu
 GISCafe Voice

Archive for the ‘asset management’ Category

What happens now: Google Enterprise products no longer supported by Google

Thursday, March 5th, 2015

What has been an un-announcement in the geospatial industry is the fact that Google Maps Engine and Google Earth Enterprise are to be discontinued by Google. It’s possible that Google didn’t send out a press release about this because their customers, who are mainly consumers, may mistake the message to mean that Google Maps and Google Earth will be discontinued by Google, which is absolutely not the case.

The Esri/Google architecture in the post Google Earth Enterprise World

The Esri/Google architecture in the post Google Earth Enterprise World

(more…)

Intergraph and ETAP form Strategic Alliance to Benefit Utilities Customers

Friday, February 27th, 2015

Michel Gilles, vice president for Utilities and Communications for Intergraph, talked with GISCafe Voice this week about the recent strategic alliance between Intergraph and ETAP, to collaborate on their products’ integration and address the market for utilities and telecommunications. This fast-growing market is now beginning to support new sources of generation and production of energy. The announcement was made at DistribuTECH.

The ETAP Microgrid

The ETAP Microgrid

(more…)

Announcement for Vendors: Special Coverage of “Emergency Response Solutions”!

Tuesday, February 24th, 2015

During the week of March 17th , GISCafe Voice will run a special feature blog on the topic, “Emergency Response and Management Solutions.

Print (more…)

Bentley acquires Acute3D to advance reality modeling

Thursday, February 19th, 2015

Bentley Systems announced that it has acquired the French company Acute3D, provider of Smart3DCapture software for reality modeling.

Acute3D Smart3DCapture has five different editions, two of which are what the company refers to as “prosumer” editions; consumer customers and professionals working on small non-georeferenced projects can use these two editions to simply generate 3D models from photos.

Acute3D (more…)

Trimble’s Rapid Positioning System Simplifies Layout for Contractors

Thursday, February 5th, 2015

David Burczyk, Segment Manager Field Solutions at Trimble, spoke with GISCafe Voice about the the company’s Rapid Positioning System, that includes Trimble RPT600 Layout Station, for layout of points and to capture them as-built measurements, and Trimble Field Link 2D software that runs on a performance tablet to control the layout station.

Trimble_Rapid_Positioning_System_(640x479) (more…)

GISCafe Voice Techno-Predictions for 2015

Tuesday, January 27th, 2015

In the United States alone, geospatial data and services are estimated to generate $1.6 trillion annually.

Skybox Imaging

Skybox Imaging

(more…)

New EAGLE Platform designed for solar energy suitability

Thursday, January 22nd, 2015

According to UK-based Bluesky, a prototype version of a website online platform has been launched that allows homeowners, solar installers and manufacturers, energy companies and government organizations to assess the suitability of individual properties for solar energy technology.

Bluesky_Eagle_Crop_edited-1 (more…)

IMAGINiT on “The challenge of managing big datasets”

Friday, January 9th, 2015

At Autodesk University 2014 held in Las Vegas in December, Joe Hedrick, Infrastructure Solutions Team Manager, IMAGINiT Technologies, spoke with GISCafe about how projects in general are becoming bigger, along with ever-increasing use of reality capture. IMAGINiT  is a provider of software, training, support and services to design and engineering companies and Autodesk Authorized Reseller and Autodesk Training Center.

The InfraWorks 360 Model Builder cloud service allows users to select a city-scale area from a map of the world in order to generate 3D city models in minutes.

The InfraWorks 360 Model Builder cloud service allows users to select a city-scale area from a map of the world in order to generate 3D city models in minutes.

“Bigger datasets, more partners and consultants are involved,” said Hedrick. “We continue to see a huge increase in people looking for ways to manage data. We’ve had several contracts with the army where they are managing everything from facility drawings to various documents and spreadsheets. In addition, private and commercial engineering and architectural firms are looking for ways to share data and projects.”

IMAGINiT will sometimes have to build tools inhouse, but mostly they use Autodesk Vault for integrations and data storage. “Commercial firms may want to tie into accounting, and we have integrations into some of the popular accounting packages out there,” said Hedrick. “We’re in the middle of a big one for the government. We are using our system and then programmatically writing to the data tables that they have in place.”

A cheaper solution to integration and managing data is Autodesk’s Fusion A360, said Hedrick. “I think it will change how we manage data. It’s going to integrate very nicely into the design platforms and apps.”

With data management, Hedrick said the biggest challenge is the size of the models. “How do you share a model that could be several gigabytes? With one of the army projects, we’re talking about 3 TB of data. How do we share that information? With pure sizes, there’s not a great way to share that amount of information. This becomes particularly difficult when you incorporate scanned data into it.” Hedrick said it used to be hard to find anyone to embrace the cloud but now the government is beginning to embrace it and the security is better. The cloud holds a lot of promise for managing large datasets and is being offered as a service in the InfraWorks 360 Model Builder cloud service.

(more…)

Happy New Year and 2015 GISCafe Voice Editorial Calendar!

Tuesday, January 6th, 2015

Happy New Year from GISCafe!

planets (more…)

GIS and CAD converge: interview with Autodesk’s Paul McRoberts

Monday, December 8th, 2014

In an interview with vice president, Infrastructure at Autodesk, Paul McRoberts at Autodesk University 2014, GISCafe Voice discussed the convergence of GIS and CAD technologies at the company.

The InfraWorks 360 Model Builder cloud service allows users to select a city-scale area from a map of the world in order to generate 3D city models in minutes.

The InfraWorks 360 Model Builder cloud service allows users to select a city-scale area from a map of the world in order to generate 3D city models in minutes.

(more…)

GENEQ
Teledyne Optech
Teledyne:
GEOINT2017
CADalog.com - Countless CAD add-ons, plug-ins and more.



Internet Business Systems © 2017 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
TechJobsCafe - Technical Jobs and Resumes EDACafe - Electronic Design Automation GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy