Open side-bar Menu
 GISCafe Voice

Archive for the ‘location based services’ Category

Trimble’s Rapid Positioning System Simplifies Layout for Contractors

Thursday, February 5th, 2015

David Burczyk, Segment Manager Field Solutions at Trimble, spoke with GISCafe Voice about the the company’s Rapid Positioning System, that includes Trimble RPT600 Layout Station, for layout of points and to capture them as-built measurements, and Trimble Field Link 2D software that runs on a performance tablet to control the layout station.

Trimble_Rapid_Positioning_System_(640x479) (more…)

GISCafe Voice Techno-Predictions for 2015

Tuesday, January 27th, 2015

In the United States alone, geospatial data and services are estimated to generate $1.6 trillion annually.

Skybox Imaging

Skybox Imaging

(more…)

Startup AllSource uses commercial satellite imagery to monitor North Korean political prison camps from space

Wednesday, January 14th, 2015

Chuck Herring, formerly of DigitalGlobe, is one of three founders (Joe Bermudez and Stephen Wood) of the startup company Allsource Analysis Inc.  (ASA) Located in the heart of Colorado’s Front Range geospatial hub, commercial imagery intelligence and analytics products AllSource Analysis Inc. (ASA) is establishing itself as a company to address specific analysis and monitoring challenges using commercial satellite imagery and remote sensing.

A representative image of the work done by AllSource in North Korea

A representative image of the work done by AllSource in North Korea

(more…)

IMAGINiT on “The challenge of managing big datasets”

Friday, January 9th, 2015

At Autodesk University 2014 held in Las Vegas in December, Joe Hedrick, Infrastructure Solutions Team Manager, IMAGINiT Technologies, spoke with GISCafe about how projects in general are becoming bigger, along with ever-increasing use of reality capture. IMAGINiT  is a provider of software, training, support and services to design and engineering companies and Autodesk Authorized Reseller and Autodesk Training Center.

The InfraWorks 360 Model Builder cloud service allows users to select a city-scale area from a map of the world in order to generate 3D city models in minutes.

The InfraWorks 360 Model Builder cloud service allows users to select a city-scale area from a map of the world in order to generate 3D city models in minutes.

“Bigger datasets, more partners and consultants are involved,” said Hedrick. “We continue to see a huge increase in people looking for ways to manage data. We’ve had several contracts with the army where they are managing everything from facility drawings to various documents and spreadsheets. In addition, private and commercial engineering and architectural firms are looking for ways to share data and projects.”

IMAGINiT will sometimes have to build tools inhouse, but mostly they use Autodesk Vault for integrations and data storage. “Commercial firms may want to tie into accounting, and we have integrations into some of the popular accounting packages out there,” said Hedrick. “We’re in the middle of a big one for the government. We are using our system and then programmatically writing to the data tables that they have in place.”

A cheaper solution to integration and managing data is Autodesk’s Fusion A360, said Hedrick. “I think it will change how we manage data. It’s going to integrate very nicely into the design platforms and apps.”

With data management, Hedrick said the biggest challenge is the size of the models. “How do you share a model that could be several gigabytes? With one of the army projects, we’re talking about 3 TB of data. How do we share that information? With pure sizes, there’s not a great way to share that amount of information. This becomes particularly difficult when you incorporate scanned data into it.” Hedrick said it used to be hard to find anyone to embrace the cloud but now the government is beginning to embrace it and the security is better. The cloud holds a lot of promise for managing large datasets and is being offered as a service in the InfraWorks 360 Model Builder cloud service.

(more…)

Happy New Year and 2015 GISCafe Voice Editorial Calendar!

Tuesday, January 6th, 2015

Happy New Year from GISCafe!

planets (more…)

GIS and CAD converge: interview with Autodesk’s Paul McRoberts

Monday, December 8th, 2014

In an interview with vice president, Infrastructure at Autodesk, Paul McRoberts at Autodesk University 2014, GISCafe Voice discussed the convergence of GIS and CAD technologies at the company.

The InfraWorks 360 Model Builder cloud service allows users to select a city-scale area from a map of the world in order to generate 3D city models in minutes.

The InfraWorks 360 Model Builder cloud service allows users to select a city-scale area from a map of the world in order to generate 3D city models in minutes.

(more…)

TerraGo releases OpenGeoPDF technology

Tuesday, November 25th, 2014

In a conversation with George Demmy, CTO of TerraGo, GISCafe Voice learned about the release of OpenGeoPDF technology, now available with TerraGo Publisher for ArcGIS, TerraGo Composer and TerraGo Toolbar.

OpenGeoPDF

OpenGeoPDF

(more…)

Special Coverage: UAS: Disruption in the Skies

Thursday, October 23rd, 2014

Unmanned Aerial Systems is one of the disruptive technologies of this century. Whomever would have thought that small flying planes, that look very much like the hobbyist planes that people fly remotely, would someday take the role of carrier pigeons in delivering packages and also providing aerial surveillance, both on a government and citizen level.

Trimble UX5

Trimble UX5

(more…)

Special Blog Coverage of 3D Cities Coming in November!

Monday, October 20th, 2014

During the week of November 17th, GISCafe Voice will run a special feature blog on the topic, “3D Cities: Envisioning Communities of the Future.”

smarterbettercity_130021 (more…)

GIS global market in the BFSI sector expects significant growth

Friday, October 10th, 2014

In a Research and Markets study report, the analysts forecast the global GIS market in the Banking, Financial Services and Institutions (BFSI) sector to grow at a CAGR of 8.43 percent over the period from 2013 – 2018.

planets
As GIS is used for so many different industries these days, the opportunities for growth in the BFSI sector are not surprising. GIS is used across sectors such as Natural Resources, Utilities, Federal Government, Communication and Telecom, Military/Law Enforcement, and Others. GIS is used for various purposes such as disaster management, finding location details, viewing maps, marketing, designing facilities and others.

In terms of GIS product, the market can be segmented into three: Software, Data, and Services.

The report, the “Global GIS Market in the BFSI Sector 2014-2018,” has been prepared based on an in-depth market analysis with inputs from industry experts. The report covers the Americas, and the APAC and EMEA regions. It also covers the landscape of the Global GIS market in the BFSI sector and its growth prospects in the coming years. The report includes a discussion of the key vendors operating in this market. (From company materials)

(more…)

Teledyne:
CADalog.com - Countless CAD add-ons, plug-ins and more.



Internet Business Systems © 2017 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
TechJobsCafe - Technical Jobs and Resumes EDACafe - Electronic Design Automation GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy