Open side-bar Menu
 GISCafe Voice

Archive for the ‘OpenGeo’ Category

2018 CoreLogic Storm Surge Report Predicts Risk for Coastal Areas

Thursday, May 31st, 2018

The 2018 CoreLogic Storm Surge Report was released Thursday by CoreLogic, a global property information, analytics and data-enabled solutions provider.

“While industry predictions for this year’s storm season indicate average activity levels, associated storm surge risk remains an important consideration for residential and commercial properties in the 19 states analyzed,” said Dr. Tom Jeffery, senior hazard scientist at CoreLogic. “Depending on the location of a storm’s landfall and that area’s population density and reconstruction costs, lower Category storms can cause just as much damage as storms in higher categories.”

As the U.S. enters hurricane season, the report shows that more than 6.9 million homes along the Atlantic and Gulf Coasts are at potential risk of damage from hurricane storm surge surge with a total reconstruction cost value (RCV) of more than $1.6 trillion (Table 1).

Already according to predictions of the National Oceanic and Atmospheric Administration (NOAA), the 2018 hurricane season is expected to have near- to above-normal activity. NOAA predicts a 70 percent chance of 10 to 16 named storms. While not all of them will develop into hurricanes, NOAA predicts five to nine of these will develop into hurricanes, and one to four are predicted to reach Category 3 classification or higher.

According to the report, risk from hurricane-driven storm surge for homes along the Atlantic and Gulf coastlines across 19 states, as well as for 86 metro areas is analyzed in the risk CoreLogic analysis. Homes are categorized by five risk levels: Low (homes affected only by a Category 5 storm), Moderate (homes affected by Category 4 and 5 storms), High (homes affected by Category 3, 4 and 5 storms), Very High (homes affected by Category 2, 3, 4 and 5 storms) and Extreme (homes affected by Category 1-5 storms). RCV figures represent the cost to completely rebuild a property in case of damage – including labor and materials by geographic location – assuming the worst-case scenario at 100-percent destruction.

Regionally, the Atlantic Coast has more than 3.9 million homes at risk of storm surge with an RCV of more than $1 trillion (Table 2), an increase of around $30 billion compared to 2017. The Gulf Coast has more than 3 million homes at risk with over $609 billion in potential exposure to total destruction damage, with over $16 billion increase compared to 2017. Areas with less coastal exposure but with lower elevations that extend inland tend to have more total homes at risk because the surge water can travel farther inland. Additionally, due to market conditions and previous storm surge damage, construction costs can increase despite having a lower number of at-risk homes compared to other states or Core-Based Statistical Areas (CBSAs).
(more…)

Calling All Geospatial Data Providers for Upcoming GISCafe Special Coverage

Friday, May 4th, 2018

Data providers abound in the GIS and geospatial industry. Choices range from mapping, built and natural terrain modeling, survey, GIS/LIS technologies, geospatial web, asset inventory, mapping, geodetic and engineering surveying, photogrammetry, satellite imagery and real-time satellite data, remote sensing, aerial and ground-based LiDAR surveys, geographic and land information systems (GIS/LIS), and spatial computing and analysis, data provided by drones, and much more.

McMurdo Station Iceberg, Antarctica, NASA, taken from a small sat.

(more…)

GIS News of the Week: From Services to Data to Sensor Support

Friday, March 9th, 2018

This week’s GIS news includes a wide variety of announcements, from IBM’s PAIRS Geoscope to redistricting data from Caliper, of the 2018 edition of Congressional Districts.

There is a great need for services that facilitate working with large amounts of geospatial data from disparate sources. IBM addresses that need with their announcement of PAIRS Geoscope, a new experimental cloud-based service that makes it easier for developers to work with large amounts of geospatial data from across a wide variety of sources. The service handles ingesting, integrating and managing the data and allows developers to focus on their queries.

 

https://www.youtube.com/watch?v=pywazIg53JM&feature=youtu.be

(more…)

Share Open Datasets Using theMapCloud

Friday, January 26th, 2018

Recently, Scottish Geographic Information Systems (GIS) company thinkWhere announced the launch of a new cloud-based platform for GIS and geographic data, theMapCloud. theMapCloud allows maps, open data and business records to be accessed anytime, and anywhere, through a web-connected computer or mobile device. Using standard web browsers, users can view, retrieve and share maps, geographic data and other open datasets and, as well as providing a platform for GIS and other web applications, theMapCloud can be used for a host of data services and Software as a Service (SaaS) applications.

(more…)

GISCafe Trends and Predictions for 2018

Thursday, January 4th, 2018

Happy New Year!

As mentioned in our year-end wrap-up, a great number of events that shaped technology in 2017 were natural disasters. Scientists and experts predict that we will see more of these natural events and will continue R&D efforts to prepare for them.

Smart city technology will become more important as geospatial professionals seek to find better ways to predict, analyze and prepare communities for the onslaught of weather events. Actual Smart Cities are being built in some parts of the world. And to make those smart cities and countries, in some cases, viable, we will grow greater confidence in artificial intelligence, vehicle technology, Cloud, Internet of Things (IoT), drones, high resolution satellites and small satellites, augmented, virtual and mixed realities and data and sensors.

These technologies have become or will become a part of the fabric of geospatial interaction as the demand for them increases.

The Global Mountain Explorer provides information from global scales down to specific mountains, such as Borah Peak, Idaho pictured above. (Public domain.)


(more…)

Boundless Desktop 1.1 Release and Partnership with Mapbox

Thursday, August 3rd, 2017

Alison Drain, product manager at Boundless, spoke with GISCafe Voice about the new product release of Boundless Desktop 1.1 and strategic partnership with Mapbox announced in July. Mapbox is a location data and mapping data platform for developers.

(more…)

Pitney Bowes Brings Location-Based Technology to Big Data Environments with New Cloudera Partnership

Thursday, February 9th, 2017

Pitney Bowes Inc., a global technology company that provides innovative products and solutions to power commerce that acquired the mapping company MapInfo some years ago, announced last week that it has entered a partnership with Cloudera to deploy geospatial processing and data quality solutions to end users on top of Cloudera Enterprise. Clients will now have access to powerful location-based technology to enrich their Big Data investments.

Pitney Bowes Network Analytics

According to company materials, Cloudera clients will now have the ability to not only tackle the volume, velocity and variety of big data, but they will also be able to manage the veracity of it. Currently Pitney Bowes is deploying four Cloudera Certified Technology products that will ensure clients are accessing the highest quality location data to make more accurate and successful business decisions, including Pitney Bowes Spectrum Geocoding for Big Data, Spectrum Location Intelligence for Big Data, Spectrum Data Quality for Big Data and the Spectrum Technology Platform.
(more…)

2017: Geospatial Musings

Tuesday, January 10th, 2017

Happy New Year!

The recent presidential election in the U.S. has created so much uncertainty that it is hard to know what the future of any industry will be. For the first time, I feel there is no point in making predictions for the New Year for the geospatial industry, unless one is an insider with special knowledge of the winds of change.

Sevenhugs SmartRemote

(more…)

GISCafe Editorial Calendar 2017

Tuesday, November 8th, 2016

GISCafe Editorial Calendar 2017*

IMG_5117
(more…)

Bentley Year In Infrastructure 2016 – Integrating GIS and BIM

Thursday, November 3rd, 2016

It’s difficult not to be inspired when attending the Bentley Year In Infrastructure Conference, with so many talented professionals gathered to show off their infrastructure projects.

Innovation in Rail and Transit Winner: Bandedamark - New Line, Copenhagen-Ringsted, Copenhagen Capital Region, Denmark

Innovation in Rail and Transit Winner: Bandedamark – New Line, Copenhagen-Ringsted, Copenhagen Capital Region, Denmark. Image Courtesy of Bentley Systems

(more…)

University of Denver GIS Program
Teledyne Optech
Teledyne:



Internet Business Systems © 2018 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
TechJobsCafe - Technical Jobs and Resumes EDACafe - Electronic Design Automation GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise