Open side-bar Menu
 GISCafe Voice

Archive for the ‘satellite imagery’ Category

What happens now: Google Enterprise products no longer supported by Google

Thursday, March 5th, 2015

What has been an un-announcement in the geospatial industry is the fact that Google Maps Engine and Google Earth Enterprise are to be discontinued by Google. It’s possible that Google didn’t send out a press release about this because their customers, who are mainly consumers, may mistake the message to mean that Google Maps and Google Earth will be discontinued by Google, which is absolutely not the case.

The Esri/Google architecture in the post Google Earth Enterprise World

The Esri/Google architecture in the post Google Earth Enterprise World


Bentley acquires Acute3D to advance reality modeling

Thursday, February 19th, 2015

Bentley Systems announced that it has acquired the French company Acute3D, provider of Smart3DCapture software for reality modeling.

Acute3D Smart3DCapture has five different editions, two of which are what the company refers to as “prosumer” editions; consumer customers and professionals working on small non-georeferenced projects can use these two editions to simply generate 3D models from photos.

Acute3D (more…)

Esri’s new ArcGIS Open Data Site Available for Open Data Sharing

Wednesday, February 11th, 2015

Esri announced the launch of a new site aimed to help citizens locate organizations sharing open data around the world and provide direct access to thousands of open government datasets. Citizens can search, download, filter, and visualize this data through their web browser or mobile device.

Screen Shot 2015-02-11 at 10.30.20 AM (more…)

GISCafe Voice Techno-Predictions for 2015

Tuesday, January 27th, 2015

In the United States alone, geospatial data and services are estimated to generate $1.6 trillion annually.

Skybox Imaging

Skybox Imaging


Startup AllSource uses commercial satellite imagery to monitor North Korean political prison camps from space

Wednesday, January 14th, 2015

Chuck Herring, formerly of DigitalGlobe, is one of three founders (Joe Bermudez and Stephen Wood) of the startup company Allsource Analysis Inc.  (ASA) Located in the heart of Colorado’s Front Range geospatial hub, commercial imagery intelligence and analytics products AllSource Analysis Inc. (ASA) is establishing itself as a company to address specific analysis and monitoring challenges using commercial satellite imagery and remote sensing.

A representative image of the work done by AllSource in North Korea

A representative image of the work done by AllSource in North Korea


Happy New Year and 2015 GISCafe Voice Editorial Calendar!

Tuesday, January 6th, 2015

Happy New Year from GISCafe!

planets (more…)

GIS and CAD converge: interview with Autodesk’s Paul McRoberts

Monday, December 8th, 2014

In an interview with vice president, Infrastructure at Autodesk, Paul McRoberts at Autodesk University 2014, GISCafe Voice discussed the convergence of GIS and CAD technologies at the company.

The InfraWorks 360 Model Builder cloud service allows users to select a city-scale area from a map of the world in order to generate 3D city models in minutes.

The InfraWorks 360 Model Builder cloud service allows users to select a city-scale area from a map of the world in order to generate 3D city models in minutes.


GameSim announces CRADA with the NGA

Thursday, December 4th, 2014

The notion of gaming and geospatial coming together has been explored for some time. Gaming simulation and GIS software provider GameSim Inc. announced a Cooperative Research and Development Agreement (CRADA) with the National Geospatial-Intelligence Agency. (NGA). This agreement will give credence to GameSim’s 3D environment with standards and data created and validated by the NGA.

In 2013, GameSim, ranked by Inc. Magazine as one of the 500 fastest growing companies in the U.S., introduced an innovative software product, Conform (, which generates a 3D representation of an environment from GIS data (vectors, elevation, and imagery) in near real-time. The integrated scene can be viewed in both 2D and 3D, or exported, into other run-time formats.

GameSim was interested in furthering their process of fusing together a single 3D environment by supporting additional data products (e.g., LiDAR, OTW video, and thermal video), to create a more accurate and rich 3D environment, while still maintaining near real-time performance. GameSim had previous experience working with these formats. The agreement with NGA through CRADA will provide the company with proper standards and data validated by NGA. In addition, GameSim and NGA will research the creation of a low bandwidth, browser-based visualization of that fused environment, according to GameSim company materials.

“We are creating a product that can fuse a variety of formats that adheres to established standards,” said Andrew Tosh, GameSim founder and president. “By collaborating with NGA it helps assure that GameSim produces a product that can meet the demands of the intelligence community, in terms of accessing their content and producing valuable visualizations.”


Special GISCafe Coverage: 3D Cities: Envisioning Communities of the Future

Friday, November 21st, 2014

Cities worldwide are charged with the same challenge: that of creating or retrofitting sustainable, intelligent infrastructure. Cities need the best in design, geospatial, visualization and analytical tools to realize a viable and intelligent city design. 3D City design is architectural design times thousands, plus it must have the ability to be interwoven with other surrounding infrastructure and foster an urban conversation.

CyberCity 3D

CyberCity 3D


Bentley acquires SITEOPS civil engineering cloud software

Tuesday, November 18th, 2014

[First Published in AECCafe Voice]

Mike Detwiler, Bentley vice president and Rachel Rogers, Bentley director Civil, Geospatial, and Hydraulics & Hydrology, spoke with AECCafe Voice this week about the Bentley acquisition of North Carolina-based BLUERIDGE Analytics, provider of SITEOPS civil engineering cloud software, in August 2014.

Panther_Center_3_SITEOPSMike Detwiler was CEO and co-founder of SITEOPS prior to the acquisition. He is now vice president SITEOPS Product Development at Bentley. The office will remain in Charlotte, North Carolina, and the SITEOPS staff will be retained.

SITEOPS comes to Bentley with an impressive list of engineers, developers and land planners working in the retail, real estate and AEC industries. Says Rogers, “We’ll continue to support our users and work with them to help take SITEOPS to the next level. Bentley and SITEOPS have highly complementary products, so we’re excited to add SITEOPS to our civil design product offerings.”

Says Detwiler, “Bentley has a global reach, which is going to benefit us tremendously.”

Rogers explained that Bentley didn’t have a site optimization technology that SITEOPS brings, which is breakthrough technology in the cloud. The addition of SITEOPS empowers site development professionals to move beyond engineering to optioneering, which enables the exploration of engineering alternatives and their costs.

Detwiler added that SITEOPS engineering and optioneering can offer site design options, costs management and 3D modeling.

Teledyne Optech
University of Denver GIS Masters Degree Online
Textron - Countless CAD add-ons, plug-ins and more.

Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
TechJobsCafe - Technical Jobs and Resumes EDACafe - Electronic Design Automation GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy