Open side-bar Menu
 GISCafe Voice

Posts Tagged ‘geospatial’

CoreLogic releases 2014 Hurricane Storm Surge Risk Analysis

Friday, July 11th, 2014

Dr. Tom Jeffrey, senior hazard scientist for CoreLogic Spatial Solutions, spoke with GISCafe Voice about CoreLogic’s release yesterday of its 2014 storm surge analysis that features estimates on both the number and reconstruction value of single-family homes exposed to hurricane-driven storm surge risk within the United States.

Print (more…)

First images from SPOT 7 satellite published

Monday, July 7th, 2014

The first images gleaned from the SPOT 7 satellite were published by Airbus Defence and Space. The satellite was launched on June 30th and the images were obtained just three days after launch. Within hours, satellite programming and image acquisition, telemetry reception and processing, were all made operational to deliver these first images. These images depict highly diverse landscapes, revealing SPOT 7 range of ability to capture natural resource and urban zone mapping and agri-environmental monitoring.

SPOT7_LaMecque_presse

The entire SPOT 6/7 constellation is now in place and an improvement over the capabilities and performance offered by SPOT 5, the SPOT satellite launched in 2002. Because of the much improved capability of SPOT 6/7, SPOT 5 will be decommissioned from  commercial service during the first quarter of 2015. This new constellation offers a higher resolution, greater programming reactivity and a much higher volume of images acquired daily (in monoscopic or stereoscopic mode).

Why SPOT 6 and SPOT 7 are so advanced is because they form a constellation of high-resolution Earth observation satellites phased at 180° in the same orbit. According to press materials, this means that each point on the globe can be revisited on a daily basis and wide areas covered in record time, all with an unparalleled level of precision. With both satellites in orbit, acquisition capacity will be boosted to six million square kilometres per day – an area ten times the size of France.

(more…)

The History of America’s Maps

Thursday, July 3rd, 2014

I’m looking forward to this one:  Esri has developed an application to better access and manipulate maps from the USGS Historical Topographic Map Collection.

Topography map of Chicago

Topography map of Chicago

(more…)

CoreLogic adds Weather Fusion forensics to its data and analytics

Tuesday, June 24th, 2014

Dr. Howard Botts of CoreLogic spoke with GISCafe Voice this week, to discuss the company’s expansion of its natural hazard risk management capabilities through the addition of Weather Fusion hail, wind and lightning weather forensics to provide near real-time property-specific weather event verification. The combination of proprietary CoreLogic data and analytics with Weather Fusion weather peril verification will enable the insurance and other industries to more reliably identify loss shortly after a weather event occurs through single-source access to multiple weather data sets and solutions.

According to Botts, CoreLogic has made a major effort to acquire a number of synergistic insurance and natural hazard related businesses to augment their traditional offerings of parcel and building characteristic data.

(more…)

MapLight tracks the influence of money in politics via maps

Monday, June 23rd, 2014

For those who need to know the geographic origin of contributions to legislators by state and by companies and other political contribution information, MapLight, a nonpartisan research organization that tracks the influence of money in politics, recently announced the launch of an extensive mapping project. This project examines the following (from the press release): geographic origin of contributions to legislators by state; contributions from companies to legislators by state; and roll call votes by state and district on key bills in Congress.

This project will shed light on how money from outside sources influences local political campaigns and also will show from what geographic locations money is contributed to key legislative initiatives.

These are some of the maps that MapLight has developed so far:

MapLight uses the latest available data from the Federal Election Commission as of April 14, 2014 to analyze campaign contributions in each of the above cases for a given election cycle of period of time.

According to their website,

MapLight connects money and votes. “We bring together, in one website, the money given to politicians with each politician’s votes.

We provide data, research services, and online tools that work together to make patterns of money and influence more transparent. Connections between campaign contributions, interest groups and votes that would have required days or weeks of manual research are now available at the click of a mouse.

(more…)

GIS companies embrace integration with Building Information Modeling workflows and field layout

Friday, June 20th, 2014

Since last year,  traditional GIS positioning companies such as TopCon, are getting into the act of providing integration of Building Information Modeling workflows and field layout with their recent collaboration with Autodesk.  This collaboration involves an Autodesk BIM 360 app for iPad to make it easier to locate BIM coordinates precisely on a construction site. Designed for general contractors and MEP professionals, the app controls a robotic total station and the LN-100 3D positioning system from Topcon. As-built data can be fed back into the design model via BIM 360 for quality assurance. Topcon was traditionally considered a geospatial company but they have extended their reach into many other industry segments now, including the area of BIM.

(more…)

Space-Time Insight announces new version of SI Suite 5.0

Wednesday, June 18th, 2014

Space-Time Insight, provider of next‐generation situational intelligence solutions, today introduced SI Suite 5.0, a major new version of its real-time visual analytics software.

For those who need help decifering large volumes of data, SI Suite 5.0 helps by combining a highly configurable and intuitive end-user interface with advanced analytics based on open standards. Esri is partnered with Space-Time Insight and thus ArcGIS is integrated into SI Suite 5.0, which makes it easier for Esri customers to analyze and comprehend big data. The software correlates and analyzes data from any number of enterprise (IT), operational (OT) and external (XT) sources across space, time and nodes in a network.

With SI Suite 5.0, Space-Time Insight can help organizations with decision making by intuitively correlating, analyzing and presenting data from disparate systems in compelling visual formats that are actionable.  The software allows users to interactively analyze data in real-time, reducing the dependence on data scientists which is time consuming.

According to the press release, SI Suite 5.0 includes new features that make data from disparate systems easily understandable, give business users personalized access to advanced analytics, and run on a range of platforms from tablets to operations center video walls.  Highlighted new capabilities include:

  • A personalized HTML 5-based user interface that uses rich visualizations, advanced filters and alerts to drive attention to assets and events, providing 360-degree operational insight into data from any number of systems in a single pane-of-glass.  Users control specifically what data they want to see and how they want to see it, boosting productivity and speeding decision-making.
  • Interactive analytics that uses the open standard R language, bringing analytics out of the “lab” and making it easily accessible to business users.  Users are empowered to interactively execute real-time statistical, predictive and what-if analysis of data, reducing the dependence on data scientists to perform analyses on their behalf.
  • Delivery through web browsers on desktop, tablets and video walls of data in a wide range of visualization formats including configurable charts and tables, and geospatial presentations enabled by Esri’s ArcGIS location platform.  The software easily integrates third-party applications such as SAP, OSIsoft PI and many others, eliminating the need for users to access multiple systems and manually correlate data themselves.

 

 

Open developer portal launched for TomTom Bridge

Friday, June 13th, 2014

TomTom launched an open developer portal for the developer platform, TomTom Bridge, this week that allows for  integration of business applications with TomTom technologies. TomTom Bridge is designed for those businesses that run a fleet of vehicles, and the new portal makes it possible for developers, integrators and value-added partners to build business apps. Developers will get access to SDKs, that include tips on the best use of the platform.

Included in the new platform are a fully customizable app store, AppCarousel, for businesses to match their choice of apps, branding and features. Page Up is enabling a series of mobile solutions with Near Field Communication and bar code scanner, digital signature app and connection to a Bluetooth printer. The new open developer portal also provides detailed information on Application Programming Interface, a document library and case studies and links to TomTom Content downloads.

 

 

Skybox to be acquired by Google for $500 million

Wednesday, June 11th, 2014

Google announced it will acquire Skybox for $500 million yesterday.

skybox-970x450_35999 (more…)

CyberCity 3D pens an agreement with Bluesky

Thursday, June 5th, 2014
Image shows - CyberCity 3D buildings combined with Bluesky’s National Tree Map data in CityEngine. Screenshot provided by Elliot Hartley of Garsdale Design.

Image shows – CyberCity 3D buildings combined with Bluesky’s National Tree Map data in CityEngine. Screenshot provided by Elliot Hartley of Garsdale Design.

Advanced geospatial smart building data provider, CyberCity 3D,  Inc., has teamed with Bluesky, a UK-based aerial mapping company, to create cutting-edge, 3D city models.
The combination of the offerings of these two firms is expected to result in some amazing 3D models, by combining CyberCity 3D’s proprietary 3D building production capabilities with Bluesky’s stereo aerial imagery in the UK and hopefully to other markets.

Bluesky has an extensive data library that covers 150,000 sq km of off-the-shelf aerial photography. With access to this resource  CyberCity 3D will have gain access to urban centers across the UK immediately for 3D Smart Building production.  Bluesky’s specialization in the acquisition and processing of aerial photography will benefit CyberCity 3D as it finds the need for “new” flights to produce 3D models for its increasing client base.Earlier this year, CyberCity 3D – utilizing Vertex imagery – completed production of 3D London City Centre as well as an extended area including Nine Elms, South Kensington, and Chelsea.  The resulting 3D model has attained acclaim and client interest, and led to this groundbreaking new agreement with Bluesky.   By the end of the summer, this data partnership is expected to grow into a 3D data sales agreement involving maps throughout Great Britain.CyberCity 3D will be able to offer precision 3D smart buildings in Great Britain and provide clients with 3D city modeling. The company expects to launch cloud-based 3D buildings services this summer. (more…)

Trimble
CADalog.com - Countless CAD add-ons, plug-ins and more.



Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
TechJobsCafe - Technical Jobs and Resumes EDACafe - Electronic Design Automation GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy