Open side-bar Menu
 GISCafe Voice

Posts Tagged ‘mobile’

Trimble TBC v4.10 Simplifies the Creation of GIS Deliverables

Thursday, June 14th, 2018

In May, Trimble announced version 4.1 of Trimble® Business Center office software designed for surveyors and geospatial professionals to simplify the creation of cadastral, GIS, infrastructure inspection and tunneling deliverables. Using new cloud-based data synchronization and workflow task management capabilities, Version 4.1 provides seamless integration with Trimble Access™ 2018 field software to improve field-to-office productivity.

(more…)

Boundless Ventures Offline with the Offline Tile Server

Wednesday, June 6th, 2018

Anthony Calamito, chief geospatial officer at Boundless talked about the Boundless Offline Tile Server that delivers rapid access to basemaps around the world, drilling down to the street and building level, to professionals who can’t rely on internet connectivity out in the field.

(more…)

2018 CoreLogic Storm Surge Report Predicts Risk for Coastal Areas

Thursday, May 31st, 2018

The 2018 CoreLogic Storm Surge Report was released Thursday by CoreLogic, a global property information, analytics and data-enabled solutions provider.

“While industry predictions for this year’s storm season indicate average activity levels, associated storm surge risk remains an important consideration for residential and commercial properties in the 19 states analyzed,” said Dr. Tom Jeffery, senior hazard scientist at CoreLogic. “Depending on the location of a storm’s landfall and that area’s population density and reconstruction costs, lower Category storms can cause just as much damage as storms in higher categories.”

As the U.S. enters hurricane season, the report shows that more than 6.9 million homes along the Atlantic and Gulf Coasts are at potential risk of damage from hurricane storm surge surge with a total reconstruction cost value (RCV) of more than $1.6 trillion (Table 1).

Already according to predictions of the National Oceanic and Atmospheric Administration (NOAA), the 2018 hurricane season is expected to have near- to above-normal activity. NOAA predicts a 70 percent chance of 10 to 16 named storms. While not all of them will develop into hurricanes, NOAA predicts five to nine of these will develop into hurricanes, and one to four are predicted to reach Category 3 classification or higher.

According to the report, risk from hurricane-driven storm surge for homes along the Atlantic and Gulf coastlines across 19 states, as well as for 86 metro areas is analyzed in the risk CoreLogic analysis. Homes are categorized by five risk levels: Low (homes affected only by a Category 5 storm), Moderate (homes affected by Category 4 and 5 storms), High (homes affected by Category 3, 4 and 5 storms), Very High (homes affected by Category 2, 3, 4 and 5 storms) and Extreme (homes affected by Category 1-5 storms). RCV figures represent the cost to completely rebuild a property in case of damage – including labor and materials by geographic location – assuming the worst-case scenario at 100-percent destruction.

Regionally, the Atlantic Coast has more than 3.9 million homes at risk of storm surge with an RCV of more than $1 trillion (Table 2), an increase of around $30 billion compared to 2017. The Gulf Coast has more than 3 million homes at risk with over $609 billion in potential exposure to total destruction damage, with over $16 billion increase compared to 2017. Areas with less coastal exposure but with lower elevations that extend inland tend to have more total homes at risk because the surge water can travel farther inland. Additionally, due to market conditions and previous storm surge damage, construction costs can increase despite having a lower number of at-risk homes compared to other states or Core-Based Statistical Areas (CBSAs).
(more…)

Geotechnical Focus for Bentley Systems’ Corporate Update

Thursday, May 17th, 2018

Bentley Systems CEO Greg Bentley kicked off the Bentley Corporate Update webinar last week with a discussion of how the annual corporate update is different than in previous years. Journalists in 28 countries attended the 2017 Year In Infrastructure Thought Leadership Conference and Awards held in Singapore.

Leighton Asia Hong Kong Boundary Crossing – BIM Advancements in Construction – Be Inspired Award Winner (photo courtesy of Bentley Systems)

(more…)

Vista LiDAR Sensor Unveiled for Autonomous Vehicles

Thursday, April 26th, 2018

Cepton Technologies, Inc., a provider of 3D LiDAR solutions for automotive, industrial and mapping applications, recently introduced its Vista LiDAR sensor at the annual NVIDIA GPU Technology Conference, making it immediately available for the autonomous vehicle market.

Vista on the car

(more…)

Kinesis Tracks Over 2 Billion Vehicle Tracked Miles with Online Monitoring Solution

Friday, April 20th, 2018

Kinesis, the global vehicle tracking solution from Telematics at Radius Payment Solutions in Crewe, UK, recently recorded the milestone of over 2 billion vehicle tracked miles. Since launching in the UK three years ago, Kinesis has installed its state of the art tracking hardware in more than 50,000 vehicles across Europe, Southeast Asia and North America.

(more…)

Street-Level Images Come to ArcGIS Pro with Mapillary

Thursday, March 22nd, 2018

Recently, ArcGIS Pro specialists at the company Mapillary answered a few questions for GISCafe Voice:

How long has Mapillary been in existence? What is its primary focus?

Mapillary is a street-level imagery platform powered by collaboration and computer vision. The company was founded in 2013.

Mapillary combines images from any device into a visualization of the world to generate data for improving maps, developing cities, and progressing the automotive industry. Mapillary’s tools enable anyone to collect, share, and use street-level images. Computer vision technology reconstructs locations in 3D and recognizes objects from the images to generate map data at scale. Today, people and organizations all over the world have contributed over 250 million images toward Mapillary’s mission of helping people understand the world’s places through images and making this data available.

What does the new Mapillary for ArcGIS Pro beta contain – what are its primary features?

The Beta focuses on bringing Mapillary public imagery into ArcGIS Pro. In short, it lets customers:

  • view Mapillary imagery as visual reference,
  • view, edit, and create features in street-level imagery,
  • compare imagery to see how places change over time.

What was in the previous release and why did you make certain feature upgrades?

The latest version, available in Public Beta, contains the same general functionality as earlier releases. However, we’ve made considerable performance improvements.

Earlier releases of Mapillary for ArcGIS Pro faced a challenge when rendering the large number of features required to show our imagery coverage. Our previous method of serializing vector tiles into a feature layer came coupled with a decrease in performance. For the Public Beta, we’ve notably increased performance and reduced system overhead by serving vector tiles directly into ArcGIS Pro. This means a faster and more efficient experience using Mapillary Imagery from the add-in.

Is a specific type of camera used?

The imagery on Mapillary is contributed collaboratively by Mapillary users all over the world: individuals, companies, non-profits, and governments. The platform is device-agnostic so every contributor uses a camera setup that suits them best, from Mapillary mobile apps to action cameras to professional 360-degree cameras.

What kind of geotagging of photos is used?

The Mapillary mobile apps (including integrations with some common action and 360-degree cameras) save location information into the image EXIF during capture and is then uploaded to Mapillary directly via the app. In addition, any geotagged images can be uploaded with help of our web uploader or command line tools. It’s also possible to upload image files together with a .gpx file that’s used for geotagging during the upload process.
(more…)

Bluesky Develops Low-Cost Measurement Tool for Capturing Accurate 3D Spatial Data with SmartPhones

Wednesday, February 28th, 2018

Aerial mapping company Bluesky of Leicestershire, UK has completed a research project backed by the UK government’s innovation agency, Innovate UK, to develop the use of mobile phones for capturing accurate 3D spatial information.

The nine-month research project focused on the use of standard smart phone technology to capture and calibrate video footage, and then convert it to 3D information. Designed for electricity Distribution Network Operators (DNO) and other organizations with a distributed asset base, the low-cost measurement tool can provide an accurate record of the feature’s location and its environment. Accurate measurements of essential infrastructure, such as overhead power lines and other utility facilities, could then be extracted using specially developed algorithms and workflows.


(more…)

Trimble Announces MX9 Mobile Mapping Solution Addition to Portfolio

Thursday, February 8th, 2018

Trimble announced the release of the Trimble® MX9 mobile mapping solution, completing Trimble’s mobile mapping portfolio. A next-generation mobile mapping system, the Trimble MX9 combines a vehicle-mounted mobile LIDAR system, multi-camera imaging and field software designed for efficient, precise and high-volume data capture for a broad range of mobile mapping applications such as road surveys, topographic mapping, 3D-modeling and asset management.

Trimble MX9 Back Perspective

According to company materials, the Trimble MX9 is characterized by its ability to capture dense point cloud data along with 360 degree immersive georeferenced imagery using an industry-leading spherical camera, GNSS/INS technology and dual-head laser scanning sensors. The system’s lightweight design makes it easy to install and setup on a variety of vehicles. Spatial data can be captured at highway speeds from inside the vehicle for safe operation in transportation corridors. The intuitive, browser-based field software, accessible via most tablets or any notebook, enables operators to quickly establish and conduct data acquisition missions, monitor the status of the system as well as assess the quality of the acquired data in real time.

Christian Hoffmann, Market Manager, Mobile Mapping Solutions, Trimble Geospatial spoke with GISCafe Voice about the recent announcement:

GISCafe Voice: Has Trimble had a mobile mapping solution before the MX9?

The Trimble Mobile Mapping portfolio has been in the market for more than a decade with popular products like the MX2 and MX7, which we currently sell. The MX9 completes Trimble’s mobile mapping portfolio, adding a high-end system that is designed for efficient acquisition of survey-grade dense point cloud data and imagery. The lightweight design and a focus on easy, tablet-based operation lowers the learning curve and contributes to maximize ROI.

Trimble MX9 Top View

GISCafe Voice: Is there a limit to how much point cloud data the MX9 can gather?

The system collects up to 2 million points per second plus various imagery, which is one of the highest data rates in the market. 2 x 2 TByte SSD drives allow recording a lot of data, typically for 7-8 hours of constant data recording. Details are dependent on the project specifications. Customers can use additional sets of disks in order to maximize acquisition capacity.
(more…)

Share Open Datasets Using theMapCloud

Friday, January 26th, 2018

Recently, Scottish Geographic Information Systems (GIS) company thinkWhere announced the launch of a new cloud-based platform for GIS and geographic data, theMapCloud. theMapCloud allows maps, open data and business records to be accessed anytime, and anywhere, through a web-connected computer or mobile device. Using standard web browsers, users can view, retrieve and share maps, geographic data and other open datasets and, as well as providing a platform for GIS and other web applications, theMapCloud can be used for a host of data services and Software as a Service (SaaS) applications.

(more…)

Teledyne Optech
Teledyne:



Internet Business Systems © 2018 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
TechJobsCafe - Technical Jobs and Resumes EDACafe - Electronic Design Automation GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise