Open side-bar Menu
 GISCafe Voice

Posts Tagged ‘satellite imagery’

What happens now: Google Enterprise products no longer supported by Google

Thursday, March 5th, 2015

What has been an un-announcement in the geospatial industry is the fact that Google Maps Engine and Google Earth Enterprise are to be discontinued by Google. It’s possible that Google didn’t send out a press release about this because their customers, who are mainly consumers, may mistake the message to mean that Google Maps and Google Earth will be discontinued by Google, which is absolutely not the case.

The Esri/Google architecture in the post Google Earth Enterprise World

The Esri/Google architecture in the post Google Earth Enterprise World

(more…)

Bentley acquires Acute3D to advance reality modeling

Thursday, February 19th, 2015

Bentley Systems announced that it has acquired the French company Acute3D, provider of Smart3DCapture software for reality modeling.

Acute3D Smart3DCapture has five different editions, two of which are what the company refers to as “prosumer” editions; consumer customers and professionals working on small non-georeferenced projects can use these two editions to simply generate 3D models from photos.

Acute3D (more…)

GISCafe Voice Techno-Predictions for 2015

Tuesday, January 27th, 2015

In the United States alone, geospatial data and services are estimated to generate $1.6 trillion annually.

Skybox Imaging

Skybox Imaging

(more…)

Startup AllSource uses commercial satellite imagery to monitor North Korean political prison camps from space

Wednesday, January 14th, 2015

Chuck Herring, formerly of DigitalGlobe, is one of three founders (Joe Bermudez and Stephen Wood) of the startup company Allsource Analysis Inc.  (ASA) Located in the heart of Colorado’s Front Range geospatial hub, commercial imagery intelligence and analytics products AllSource Analysis Inc. (ASA) is establishing itself as a company to address specific analysis and monitoring challenges using commercial satellite imagery and remote sensing.

A representative image of the work done by AllSource in North Korea

A representative image of the work done by AllSource in North Korea

(more…)

Happy New Year and 2015 GISCafe Voice Editorial Calendar!

Tuesday, January 6th, 2015

Happy New Year from GISCafe!

planets (more…)

Most important geospatial advancements of 2014? What do you think?

Thursday, December 18th, 2014

We’re almost at the end of the year and we’d like to hear from you, the readers, about what you think the most important geospatial advancements have been for 2014.

Esri CityEngine allows users to visualize both qualitative and quantitative impact of design scenarios, perfect for the integrative planning needs of those looking to develop vibrant, sustainable communities.

Esri CityEngine allows users to visualize both qualitative and quantitative impact of design scenarios, perfect for the integrative planning needs of those looking to develop vibrant, sustainable communities.

(more…)

GIS and CAD converge: interview with Autodesk’s Paul McRoberts

Monday, December 8th, 2014

In an interview with vice president, Infrastructure at Autodesk, Paul McRoberts at Autodesk University 2014, GISCafe Voice discussed the convergence of GIS and CAD technologies at the company.

The InfraWorks 360 Model Builder cloud service allows users to select a city-scale area from a map of the world in order to generate 3D city models in minutes.

The InfraWorks 360 Model Builder cloud service allows users to select a city-scale area from a map of the world in order to generate 3D city models in minutes.

(more…)

GameSim announces CRADA with the NGA

Thursday, December 4th, 2014

The notion of gaming and geospatial coming together has been explored for some time. Gaming simulation and GIS software provider GameSim Inc. announced a Cooperative Research and Development Agreement (CRADA) with the National Geospatial-Intelligence Agency. (NGA). This agreement will give credence to GameSim’s 3D environment with standards and data created and validated by the NGA.

In 2013, GameSim, ranked by Inc. Magazine as one of the 500 fastest growing companies in the U.S., introduced an innovative software product, Conform (gamesim.com/conform), which generates a 3D representation of an environment from GIS data (vectors, elevation, and imagery) in near real-time. The integrated scene can be viewed in both 2D and 3D, or exported, into other run-time formats.

GameSim was interested in furthering their process of fusing together a single 3D environment by supporting additional data products (e.g., LiDAR, OTW video, and thermal video), to create a more accurate and rich 3D environment, while still maintaining near real-time performance. GameSim had previous experience working with these formats. The agreement with NGA through CRADA will provide the company with proper standards and data validated by NGA. In addition, GameSim and NGA will research the creation of a low bandwidth, browser-based visualization of that fused environment, according to GameSim company materials.

“We are creating a product that can fuse a variety of formats that adheres to established standards,” said Andrew Tosh, GameSim founder and president. “By collaborating with NGA it helps assure that GameSim produces a product that can meet the demands of the intelligence community, in terms of accessing their content and producing valuable visualizations.”

 

Special GISCafe Coverage: 3D Cities: Envisioning Communities of the Future

Friday, November 21st, 2014

Cities worldwide are charged with the same challenge: that of creating or retrofitting sustainable, intelligent infrastructure. Cities need the best in design, geospatial, visualization and analytical tools to realize a viable and intelligent city design. 3D City design is architectural design times thousands, plus it must have the ability to be interwoven with other surrounding infrastructure and foster an urban conversation.

CyberCity 3D

CyberCity 3D

(more…)

Bentley’s “Year in Infrastructure 2014″ announces new geospatial releases

Tuesday, November 11th, 2014

In the “Utilities and Government” breakout session on Media Day at the Bentley “Year in Infrastructure 2014” event held in London last week, a number of Bentley executives spoke on various aspects of utilities and government, with new developments for 3D cities.

Bentley Year in Infrastructure 2014 Conference, London

Bentley Year in Infrastructure 2014 Conference, London

The event showcases work being done with Bentley Systems’ software, with presentations by all the Be Inspired Award finalists for the year, topped off by a gala Awards ceremony on Wednesday evening.

Cyndi Smith, senior director of Application Advantage at Bentley, introduced speakers. Aidan Mercer, senior industry marketing manager for Government spoke on “Advancements in Government and Life cycle Management of Infrastructure.” He also spoke about “Advanced BIM for cities,” which includes the various BIM levels used in 3D cities: Level 1: 3D visualization and design; Level 2: performance improvements; Level 3: extending into the operations at the complete asset level and this contributes to a smarter city. He mentioned a really excited finalist in the BE Awards this year, the City of Eindhoven, a city that uses MicroStation, Descartes, ProjectWise, and Navigator in its development of new city infrastructure.

Know What’s Underground

Rachel Rogers, Applications Advantage for Civil, Geospatial, Hydraulics and Hydrology, announced Bentley Subsurface Utility Design and Analysis in OpenRoads will be available in early 2015, and will be a game changer in terms of knowing what’s underground.

The product automatically creates a 3D model and brings together the information needed, provides 3D modeling of all underground utilities, that you can readily update into your GIS database. This gives you a true picture of what’s underground.

One of the highlights is that you have visualization clash detection which can drive construction costs down.

Utility Industry with Cyndi Smith

An industry trend seen recently: convergence. “With the convergence of information technology and operations technology, some projects I’m seeing are bringing in engineering technology,” said Smith.

Better utilities performance catalyzed by:

  • Drivers and enablers
  • Smarter networks and technology
  • Regulations
  • Economic factors
  • Organizational evolution
  • Results better performing utilities infrastructure

(more…)

Trimble
CADalog.com - Countless CAD add-ons, plug-ins and more.



Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
TechJobsCafe - Technical Jobs and Resumes EDACafe - Electronic Design Automation GISCafe - Geographical Information Services  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy