CHAPTER 2
Power considerations in submicron digital CMOS 2.7. Example of a digital video filter The following section introduces an example of a lowpass digital FIR filter for video applications, showing how power savings can be made by replacing multiplications with shift and add operations. This is possible by using a special format for the filter coefficients as powers of 2 or differences of powers of two. For digital realizations adders from section 2.5 have been used. The same filter will be realized in Chapter 4 as an analog filter where comparisons between analog and digital realizations will be given. The filter has a passband up to 5.5MHz, a transition band from 5.5MHz up to 15MHz and a stopband rejection better than 40dB. The specifications of the video filter are summarized in table 2.2. For a luminance video filter it is important to have a very low passband ripple. That is why the possible solutions are Butterworth and inverseChebyshev filters with a maximally flat amplitude in the passband. It is known that inverseChebyshev filters provide a smaller groupdelay when compared to Butterworth counterparts. That is why, an inverseChebyshev filter has been chosen. The synthesis procedure of the filter is given in Appendix 2 and the outcome of the synthesis is the filter from fig.2.13. The group delay of the filter varies from 46ns and 59ns, thus within specifications.
Table 2.2: Video filter specifications
The chosen sampling frequency of the filter is f_{sampling}=40MHz. As long as the coefficients are fixed, multiplications can be transformed in shift and add operations. The computed coefficients are given in table 2.3. Here T stands for sign inversion and L represents the exponent. The first column shows the coefficients in real format and in the second column, the coefficients are given in CSD (Carry sign digit) format.
Table 2.3: Coefficients in real format and CSD format In this format (CSD), the coefficients are realized from powers of two or differences of powers of two. Multiplication with a power of two means shifting. Consider the second coefficient of the filter 2.343750L02 which can be written as 1/2^{5}1/2^{7}. The multiplication with this value is illustrated in fig.2.14.
The input is shifted 5 times and added to the inverted value of the input shifted 7 times. The adder has one bit in plus compared to the wordlength and the input CARRY set to one such that overflow will not occur. Fig.2.15 shows the transfer function of the video filter realized with coefficients from table 2.3. It is important to mention that CSD format is an approximation of the filter coefficients. That is why a computer routine is necessary to find the best approximation to fit the filter within the specifications. This method can be used whenever coefficients are fixed, like in dedicated applications. According to table 2.3, the filter can be implemented with 11 adders for multiplications and 9 adders for final summation. The power consumption of the filter can be found by using the results of section 2.5. In the Table 2.4 the energy consumption of the full adder FA from fig.2.8 are given. The technology is a 0.5m m CMOS digital technology. The power consumption of the FIR video filter taking into account only the computational power is 2mW which gives about 660m W per pole (0.16pJ/pole). To be mentioned that FIR filters are all zero filters but for the sake of comparisons with analog approaches we have considered the power per analog pole. In conclusion, this example shows that for applications with fixed coefficients a multiplier is not always necessary and power savings can be achieved by using only shift and add operations.
Table 2.4: Energy per transition of a full adder in 0.5mm CMOS 




