CHAPTER 8

Conclusions


Prev TOC Next

8.4. Recommendations for further research

  • Application of the theory illustrated in Chapter 2 for power comparisons and analysis of power in A/D converters. Most of the effort should be done in the comparator sizing according to accuracy requirements for every bit. This is crucial in the next generation A/D for high frequency applications like RF fully digitized radio receivers.
  • A thorough investigation of power in oscillators, low-noise amplifiers where noise optimization is important for improving phase noise and noise factors respectively.
  • The use of chopper technique to improve matching in polyphase filters reducing further the power consumption and the realization of a polyphase filter capable of working below 1V (one penlite requires 0.9V when discharged).
  • The application of the chopper technique in low offset integrators used for battery management in monitoring the battery current.
  • The combination of the two Sinc approximation techniques in a single design for power reduction in the digital domain and the investigation of the possibility to use CDS format in having powers of two as coefficients. This will improve tremendously the matching in the current sources.
  • The implementation of a D/A converter with a class A chopped amplifier for increasing the dynamic range for high resolution applications (>20 bit).


Featured Video
Jobs
GIS Analyst II for Air Worldwide at Boston, MA
Business Partner Manager for Cityworks - Azteca Systems, LLC at Sandy, UT
Senior Structural Engineer for Design Everest at San Francisco, CA
Mechanical Engineer for IDEX Corporation at West Jordan,, UT
Upcoming Events
RoboUniverse San Diego at San Diego CA - Dec 14 - 15, 2016
DGI 2017 at QEII Centre London United Kingdom - Jan 23 - 25, 2017
Geospatial World Forum 2017 Hyderabad at Hyderabad International Convention Center P.O Bag 1101, Cyberabad Post Office Hyderabad Telangana India - Jan 23 - 25, 2017
Trimble
CADalog.com - Countless CAD add-ons, plug-ins and more.



Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation TechJobsCafe - Technical Jobs and Resumes  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy