Power, accuracy and noise aspects in CMOS mixed-signal design

Title: Power, accuracy and noise aspects in CMOS mixed-signal design
Author: Sanduleanu, Mihai Adrian Tiberiu
ISBN: 90-3651265-4
©1999, Mihai A.T. Sanduleanu

Table of Contents

Selected Symbols and Abbreviations
 
Chapter 1   Introduction
  1.1. Motivation
  1.2. Problem definition
  1.3. Scope and outline
  References
 
Chapter 2 Power considerations in sub-micron digital CMOS
  2.1. Introduction
  2.2. Fundamental limits
  2.3. From fundamental limits to practical limits of power. An architecture level approach
  2.4. S/N ratio and power in fixed point applications
  2.5. Adders and computational power
  2.6. Ways to low-power in digital
  2.7. Example of a digital video filter
  2.8. Conclusions
  2.8. References
 
Chapter 3 Power considerations in sub-micron analog CMOS
  3.1. Introduction
  3.2. Process tuning towards digital needs. Consequences on analog
  3.3. Fundamental limits
  3.4. From fundamental limits to practical limits of power. Noise related power
  3.5. From fundamental limits to practical limits of power. Mismatch related power
  3.6. Power estimations in continuous time filters
  3.7. Conclusions
  References
 
Chapter 4 Gm-C integrators for low-power and low voltage applications. A gaussian polyphase filter for mobile transceivers in 0.35mm CMOS
  4.1. Introduction
  4.2. Large swing and high linearity transconductor
  4.3. Low voltage current Gm-C integrator with high power efficiency
  4.4. Low-power luminance video filter. Noise driven power
  4.5. Low-power, gaussian, polyphase filter for mobile transceivers. Matching driven power
  4.6. Conclusions
  References
 
Chapter 5 Chopping: a technique for noise and offset reduction
  5.1. Introduction
  5.2. Ways to reduce offset and 1/f noise
  5.3. Chopping seen as a modulation technique
  5.4. Noise modulation
  5.5. Chopped amplifiers and offset reduction
  5.6. Low-power low-voltage chopped transconductance amplifier for noise and offset reduction
  5.7. A low-power bandgap voltage reference
  5.8. Conclusions
  References
 
Chapter 6 Low-noise, low residual offset, chopped amplifiers for high-end application
  6.1. Introduction
  6.2. Low-pass filtering in a digital audio system. Application specific constraints
  6.3. The gain stage
  6.4. A low noise, low residual offset, chopped amplifier in 0.8mm CMOS
  6.5. A low noise, low residual offset, chopped amplifier in 0.5mm CMOS
  6.6. Conclusions
  References
 
Chapter 7 A 16-bit D/A interface with Sinc approximated semidigital reconstruction filter
  7.1. Introduction
  7.2. Bitstream D/A conversion system with time-discrete filtering
  7.3. S-D modulators and noise shaping
  7.4. Semidigital FIR filter principles
  7.5. Semidigital FIR filter design
  7.6. Noise properties of the D/A interface
  7.7. Realisation
  7.8. Experimental results
  7.9. Interpolative D/A converter with Sinc approximation in the time domain
  7.10. Conclusions
  References
 
Chapter 8 Conclusions
  8.1. Summary
  8.2. Conclusions
  8.3. Original contributions
  8.4. Recommendations for further research
 
Appendix 1
 
Appendix 2
 
Appendix 3
 

Harris

Featured Video
Jobs
GIS Software Developer for SoCalGas at Los Angeles, CA
GIS Analyst for G2 Partners LLC at San Ramon, CA
GIS Software Developer for UDC at Englewood, CO
Vice President, Transportation Services for Associated General Contractors of New York State at Albany, NY
Architectural Designer for Champion Home Builders at Troy, MI
Upcoming Events
GEO WEEK 2017 at Washington DC - Oct 23 - 27, 2017
GIS-PRO 2017 at Jacksonville FL - Oct 23 - 26, 2017
Commercial UAV EXPO Americas at The Westgate Resort Las Vegas NV - Oct 24 - 26, 2017
6th International Colloquium on Scientific and Fundamental Aspects of GNSS / Galileo at Technical University of Valencia Valencia Spain - Oct 25 - 27, 2017
Teledyne Optech
CADalog.com - Countless CAD add-ons, plug-ins and more.



Internet Business Systems © 2017 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation TechJobsCafe - Technical Jobs and Resumes  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise