Manufacturing Technology Orders Up 80.5% from 2010

December 12, 2011 - McLean, Va. . . . October U.S. manufacturing technology orders totaled $463.32 million according to AMT-The Association For Manufacturing Technology and AMTDA, the American Machine Tool Distributors’ Association. This total, as reported by companies participating in the USMTO program, was down 22.4% from September but up 20.3% when compared with the total of $385.21 million reported for October 2010. With a year-to-date total of $4,529.11 million, 2011 is up 80.5% compared with 2010.

     These numbers and all data in this report are based on the totals of actual data reported by companies participating in the USMTO program.

    “Manufacturing technology orders through October have already surpassed the total value accumulated in 2007,” said AMT President Douglas Woods. “The beginning of 2012 will be a little slow as tax incentives pulled some orders back into 2011, which will likely make 2012 growth softer.”

     The United States Manufacturing Technology Orders (USMTO) report, jointly compiled by the two trade associations representing the production and distribution of manufacturing technology, provides regional and national U.S. orders data of domestic and imported machine tools and related equipment. Analysis of manufacturing technology orders provides a reliable leading economic indicator as manufacturing industries invest in capital metalworking equipment to increase capacity and improve productivity.

U.S. manufacturing technology orders are also reported on a regional basis for five geographic breakdowns of the United States.

Northeast Region

     At $64.11 million, October manufacturing technology orders in the Northeast Region were down 43.0% when compared with the $112.41 million total for September and down 34.1% when compared with October a year ago. The year-to-date total of $677.09 million is 44.5% more than the comparable figure for 2010.

Southern Region

     October manufacturing technology orders in the Southern Region totaled $55.87 million, 28.4% less than September’s $78.04 million but 40.6% more than the October 2010 total. With a year-to-date total of $568.93 million, 2011 is up 60.7% when compared with 2010 at the same time.

Midwest Region

     Midwest Region manufacturing technology orders in October stood at $149.95 million, 13.0% less than the September total of $172.26 million but up 30.5% when compared with last October. At $1,523.76 million, the 2011 year-to-date total is 105.4% more than the comparable figure for 2010.

Central Region

     Manufacturing technology orders in the Central Region in October totaled $138.74 million, down 16.4% from September’s $165.98 million but up 49.3% when compared with the October 2010 figure. The $1,232.28 million year-to-date total is 85.3% higher than the total for the same period in 2010.

Western Region

     Western Region manufacturing technology orders totaled $54.65 million in October, 19.9% less than the $68.25 million total for September but 35.3% higher than the tally for October 2010. At $527.05 million, 2011 year-to-date is up 88.8% when compared with last year at the same time.

Email Contact




Review Article Be the first to review this article
Trimble

Harris

Jobs
Geospatial Analyst - Senior for BAE Systems Intelligence & Security at Springfield, VA
Geospatial Systems Administrator for BAE Systems Intelligence & Security at arnold, MO
Senior Mechanical Engineer for BAE Systems Intelligence & Security at Arlington, VA
Mechanical Design Engineer 3 for KLA-Tencor at Milpitas, CA
Sr Mechanical Design Engineer for Medtronic at mounds view, MN
Urban Designer - Urban Design/Planning for SERA Architects, Inc at Portland, OR
Upcoming Events
Geospatial World Forum 2018 at Hyderabad International Convention Centre Hyderabad India - Jan 16 - 19, 2018
2018 Annual Convention of Virginia Association of Surveyors at 24 S. Market St Staunton VA - Jan 18 - 20, 2018
ArcGIS: Introduction at Environmental and Natural Resource Building 14 College Farm Rd New Brunswick NJ - Feb 1 - 22, 2018
International LiDAR Mapping Forum at Hyatt Regency 650 15th Street, Denver CO - Feb 5 - 7, 2018
Teledyne Optech
CADalog.com - Countless CAD add-ons, plug-ins and more.



Internet Business Systems © 2017 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation TechJobsCafe - Technical Jobs and Resumes  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise