MAVinci Desktop 2.4: Efficient Multi Flight Planning for MAVinci UAS

March 09, 2012 -- With the new 2.4 MAVinci Dektop Release MAVinci introduces a novelity on the UAS market: the advanced Multi Flight Planning Tool for mapping applications. It automatically calculates multiple flight plans to cover areas which exceed the range of one flight. “The acquisition of large area orthophotos and DEMs is optimized with MAVinci Desktop 2.4.“ says MAVinci CEO Marco Möller. “ The new tool saves up to 30% flight time for large UAS missions.” Another benefit is that every single flight plan can be operated in the line of sight of the operator. For postprocessing, the data of multiple flights can be joined again to process the whole area in one block.

After selecting the area of interest and the desired GSD (Ground sampling distance) of the aerial images the software automatically determines whether the area can be covered in one flight. If more than one flight is necessary the flight plan is instantly split in two or more flight plans. The optimized multi flight planning saves time and avoids unnecessary overlap between the single flight plans.

„I did not believe the software could perform this, but it did- excellent!“ stated Ilkka Valli (www.uaskuvaukset.fi), a MAVinci customer. „Making flight plans in the office and then adjusting it in the field according to wind and other conditions can be done well with this software.“

The 2.4 MAVinci Desktop release also includes several other new features such as: reduction of complexity of operation modes and new post processing export functions such as KML export. More information about our aerial image and mapping UAS are available at www.mavinci.de

With the new 2.4 MAVinci Dektop Release MAVinci introduces a novelity on the UAS market: the advanced Multi Flight Planning Tool for mapping applications. It automatically calculates multiple flight plans to cover areas which exceed the range of one flight. “The acquisition of large area orthophotos and DEMs is optimized with MAVinci Desktop 2.4.“ says MAVinci CEO Marco Möller. “The new tool saves up to 30% flight time for large UAS missions.” Another benefit is that every single flight plan can be operated in the line of sight of the operator. For postprocessing, the data of multiple flights can be joined again to process the whole area in one block.

 

After selecting the area of interest and the desired GSD (Ground sampling distance) of the aerial images the software automatically determines whether the area can be covered in one flight. If more than one flight is necessary the flight plan is instantly split in two or more flight plans. The optimized multi flight planning saves time and avoids unnecessary overlap between the single flight plans.

 

I did not believe the software could perform this, but it did- excellent!“ stated Ilkka Valli (www.uaskuvaukset.fi), a MAVinci customer. „Making flight plans in the office and then adjusting it in the field according to wind and other conditions can be done well with this software.“

 

The 2.4 MAVinci Desktop release also includes several other new features such as: reduction of complexity of operation modes and new post processing export functions such as KML export. More information about our aerial image and mapping UAS are available at www.mavinci.de




Review Article Be the first to review this article
Harris: ENVI OneButton

Airbus

Jobs
Oil & Gas Pipeline Engineer for CH2M HILL at Englewood, CO
GIS Planner II for City of Raleigh at Raleigh, NC
Development Officer - Housing: Policy and Planning for City of San Jose at San José,, CA
Mechanical Engineer for Lockheed Martin at Littleton, CO
BIM/ Revit Specialist for MacDonald-Miller Facility Solutions at Moses Lake, WA
Purchasing/Supplier Preparation and Development Specialist for HINO Motors USA at Farmington Hills, MI
Upcoming Events
Robot@home at IFA powered by Innorobo at Berlin Germany - Sep 4 - 7, 2016
InterDrone 2016, September 7-9, 2016, Las Vegas, NV at Paris Hotel Las Vegas NV - Sep 7 - 9, 2016
2016 LP360 Training Event at 9668 Madison Blvd, Suite 202 Madison AL - Sep 12 - 15, 2016
2016 Summit on Earth Observation Business, Sept 15 - 16, 2016, The Westin, Paris, France at The Westin Paris 3 Rue de Castiglione Paris France - Sep 15 - 16, 2016
Trimble
Racurs
Teledyne:
CADalog.com - Countless CAD add-ons, plug-ins and more.



Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation TechJobsCafe - Technical Jobs and Resumes  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy