Kubotek Announces KeyCreator Analysis

New KeyCreator Analysis finally brings simplified, accurate and fast CAD Simulation software to the masses and true multiphysics simulation to expert Analysts.

Sefea technology and optimized auto-meshing simplify setup and reduce processing time.

Marlborough, Mass., - Kubotek USA, pioneers of direct modeling, announces its new multiphysics simulation product:  KeyCreator Analysis.   KeyCreator Analysis is powered by Sefea, a new technology with unique algorithms that makes analysis easier to prepare and generates results faster while achieving very high levels of accuracy.  KeyCreator Analysis is combined with Kubotek KeyCreator direct modeling software enabling ease of model preparation and editing.

Sefea Technology allows a much simpler mesh for faster results.

There has been a great push to drive simulation into the design phase of new product design. Most designers only have a basic background in FEA, causing simulations to be of dubious worth. Other competing FEA solutions require too much FEA knowledge for the designer. That’s where KeyCreator Analysis has taken one giant step toward solving these contradictions by using technology to determine the optimum mesh size and density of a simulation calculation.  This auto-meshing works great in solving the majority of simulations that a designer would typically calculate in order to optimize their initial design.

Sefea technology speeds analysis time due to several reasons, including internal processing of analysis equations and the use of a less-dense mesh and lower memory requirements. This smart FEA technology combined with simple tree-driven menus embedded into KeyCreator now makes it possible for designers with basic knowledge of FEA to get complete and accurate results.  The coupling of Sefea within KeyCreator Analysis means engineers can truly use a tool designed to allow multiple design iterations and receive simulation results in minutes—not hours or days.

Combining world-class analysis power with direct modeling gives users an easy way to prepare models for simulation and then edit them, if need be, following the results of the simulation.  An average designer using KeyCreator Analysis will save time and money in optimizing their designs earlier in the design process.  Yet, KeyCreator Analysis has the accuracy combined with the speed for an expert simulation analyst to use for full multiphysics simulation.

Kubotek’s Partnership with AMPS Technology

“Nearly two years ago, Kubotek began a joint development project with AMPS Technology to make KeyCreator Analysis a reality,” says John McCullough, Product Manager for Kubotek USA.  He continues, “AMPS proposed a vision of next-generation FEA, with full associative CAD that stood out among the many other simulation companies that have presented proposals to us over the years.  We’re excited about the Sefea technology and think KeyCreator Analysis will be a great asset to the engineering world.  It’s easy to use, fast, accurate, and coupled with Direct Modeling means that users will get better designs earlier in the design process.”  

To learn more about Sefea Technology, download this newly released white paper titled “Sefea: Strain-enriched finite element analysis—a new generation of FEA, theory and benchmarks.”

Kubotek is planning to begin shipping KeyCreator Analysis in the early Spring.

About Kubotek

Kubotek USA—Masters of Geometry – leads the direct modeling revolution by providing CAD technology to easily create, edit or manage changes to model data.  Kubotek USA develops core technologies that can recognize, or even infer, the geometry’s attributes to facilitate interoperability in what might otherwise be unusable data.  Kubotek USA develops software that can work with geometry, no matter where it originated, for use throughout the manufacturing supply chain in order to speed time to market, reduce costs and improve quality.  Kubotek USA products include:  KeyCreator 3D Direct CAD, KeyCreator Analysis, Kubotek Validation Tool and Kubotek ECO Manager for precise model comparison/validation and visual change reports to easily manage design changes, KeyMachinist, and Kubotek Spectrum CAD viewer.  

Kubotek USA is a wholly owned subsidiary of Kubotek Corporation (7709.T Tokyo Stock Exchange).  Kubotek Corporation was founded in 1979 and is headquartered in Osaka, Japan. 

For more information please visit www.kubotekusa.com.


Kubotek, KeyCreator, Kubotek Validation Tool, Kubotek ECO Manager, KeyMachinist and Kubotek Spectrum are registered trademarks or trademarks of Kubotek Corporation. All other brand and product names are trademarks or registered trademarks of their respective owners.



Andrea Giles

Kubotek USA, Inc.

508.229.2020 ext 7057



Read the complete story ...

Review Article Be the first to review this article

Featured Video
Project Manager for Keystone Aerial Surveys at Philadelphia, PA
GIS Specialist for Fresno Irrigation District at Fresno, CA
GIS Analyst for City of Columbia, MO at Columbia, MO
Geospatial Analyst/Programmer for LANDIQ at Sacramento, CA
Avionics System Engineer for BAE Systems Intelligence & Security at Arlington, VA
Geospatial Systems Administrator for BAE Systems Intelligence & Security at arnold, MO
Upcoming Events
USC Spatial Science Summit at 3540 South Figueroa Los Angeles CA - Feb 23, 2018
2018 Los Angeles Geospatial Summit at USC Radisson Hotel 3540 S Figueroa St. Los Angeles CA - Feb 23, 2018
Webinar: What's New in Global Mapper v19.1 at United States - Feb 27, 2018
2018 Esri Developer Summit at Palm Springs Convention Center Palm Springs CA - Mar 6 - 9, 2018
Teledyne Optech
University of Denver GIS Masters Degree Online

Internet Business Systems © 2018 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation TechJobsCafe - Technical Jobs and Resumes  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise