Sagantec Announces nmigrate™

Migration and DRC correction tool for advanced nanometer technologies

SANTA CLARA, Calif., May 14, 2012 — (PRNewswire) — Sagantec announced today its nmigrate layout migration and optimization tool specifically developed for 28nm and 20nm technology rules.  nmigrate is based on the patented 2D dynamic compaction technology developed by NP-Komplete Technologies, whose acquisition Sagantec announced earlier this month.  nmigrate has already been used successfully by several tier-1 semiconductor companies.

The nmigrate tool is based on two-dimensional, automated, dynamic layout compaction technology. It makes all necessary corrections to a layout to enforce complex, must-abide-by rules for 28nm and 20nm process technologies and below.  

"Today's 28nm and 20nm technologies present many new and tougher challenges for physical implementation. A library that is competitive from density, routability, reliability and variability perspectives and at the same time respects all new technology design rules is very hard to design manually in a timely manner. Furthermore, frequent changes and updates to new technology design rules make it even more challenging to keep up with manually," explained Coby Zelnik, Sagantec's president and CEO.  "nmigrate is an automatic layout migration, compaction and optimization solution that is proven to successfully handle all these requirements and updates, delivering optimal results that are design rule clean," Zelnik concluded.

Product Capabilities

nmigrate can migrate and DRC-correct cell layout and make sure the layout adheres to all advanced design rules, including coloring for double patterning. The key benefits offered by nmigrate are:

  • Higher quality layout, enabled by its 2d native engine and optimized handling of composite rules
  • Faster time to solution, enabled by scalable automatic optimization of all layout requirements

The nmigrate tool has already been used successfully by several tier-1 semiconductor companies, and used with multiple cell libraries targeting multiple leading-edge 28nm and 20nm foundry processes.  

Availability

nmigrate is already available for customers who design or migrate libraries for 28nm and 20nm processes.  Sagantec offers both software license model as well as a service model.

At DAC'12

Sagantec will present and demonstrate nmigrate at this year's Design Automation Conference, June 4-6 in San Francisco, CA at booth number 1402.

About Sagantec

Sagantec's process migration tools are used to retarget semiconductor designs to either the next technology node or to a different process at the same or previous technology node, down to 20 nm. Privately held and funded, its corporate headquarters is at 2075 De La Cruz Blvd., Santa Clara, CA 95050.    Telephone:  (408) 727-6290       Fax: (408) 727-6288. On the Web at:  http://www.sagantec.com

note:   nmigrate is a trademark of Sagantec North America, Inc.

For information, contact:

Coby Zelnik
Sagantec                                              
Email Contact 
408-727-6290, ext 105

Liz Massingill
Lee PR
Email Contact 
650-363-0142

SOURCE Sagantec

Contact:
Sagantec
Design Automation Conference
NP-Komplete Technologies
Web: http://www.sagantec.com




Review Article Be the first to review this article

Harris

Featured Video
Jobs
GIS Analyst for G2 Partners LLC at San Ramon, CA
GIS Software Developer for UDC at Englewood, CO
Vice President, Transportation Services for Associated General Contractors of New York State at Albany, NY
Mechanical Engineer for The Planate Management Group LLC at Perry Point, MD
ENVIRONMENTAL GRAPHIC DESIGNER for Blitz at San Francisco, CA
Upcoming Events
Commercial UAV EXPO Americas at The Westgate Resort Las Vegas NV - Oct 24 - 26, 2017
6th International Colloquium on Scientific and Fundamental Aspects of GNSS / Galileo at Technical University of Valencia Valencia Spain - Oct 25 - 27, 2017
UnmannedCanada 2017 at Sheraton Parkway Toronto North Toronto Ontario Canada - Nov 1 - 3, 2017
Scientific Days of Geographical Applications, Geometric Sciences and Digital Technologies at HOTEL NIPPON TAKSIM ISTANBUL ISTANBUL Turkey - Nov 7 - 10, 2017
Teledyne Optech
CADalog.com - Countless CAD add-ons, plug-ins and more.



Internet Business Systems © 2017 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation TechJobsCafe - Technical Jobs and Resumes  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise