ESPRIT by DP Technology at Japan International Machine Tool Fair 2012 Tokyo, Japan, Nov. 1-6

Camarillo, Calif.  — Oct. 12, 2012 — Computer-aided-manufacturing (CAM) industry leader DP Technology Corp. will exhibit ESPRIT® 2013, the latest version of its flagship software, at Japan International Machine Tool Fair 2012, slated to take place Nov. 1-6 in Tokyo, Japan.

Considered a major manufacturing industry event, JIMTOF is dedicated to the development of industry and trade promotion through increased international exchange. Incorporating each manufacturing focus, JIMTOF will showcase the latest and greatest in machine and cutting tools, as well as related equipment, accessories and software.

Visitors to the ESPRIT booth will receive one-on-one demonstrations and presentations of features available within the latest generation of the software. ESPRIT 2013 offers upgrades in all machining disciplines, including enhancements to turning, milling, mill-turn and wire EDM cycles.

New to ESPRIT 2013, the patent-pending ProfitMilling strategy for 2-, 3-, 4- and 5-axis roughing cycles allows customers to remove more material in a shorter amount of time. ProfitMilling is a high-speed roughing cycle that allows you to take a significantly deeper cut of the tool and increase the cutting feed. Rather than controlling just one parameter, ProfitMilling monitors several vital cutting and machine characteristics.

The ProfitMilling toolpath manages chip load and side-cutter force in the calculation of toolpath while keeping the engagement angle and material removal rate within a specific range.

It also incorporates dynamic feedrate changes throughout the toolpath and takes advantage of toolpath optimization for specific machine capabilities.

“Our tests have shown that ProfitMilling typically reduces cycle time by 75 percent, minimizes programming time, reduces energy consumption, and increases tool life by an average of 500 percent,” said ESPRIT Product Manager Kenyon Whetsell. “We’ve seen the most dramatic benefits in using the ProfitMilling strategies with light to medium-duty machine tools.” 

 

About ESPRIT

ESPRIT is a high-performance computer-aided manufacturing (CAM) system for a full range of machine tool applications. ESPRIT delivers powerful full-spectrum programming for 2–5 axis milling, 2–22 axis turning, 2–5 axis wire EDM, multitasking mill-turn machining and B-axis machine tools, and high-speed 3- and 5-axis machining.

 

About DP Technology Corp.

            DP Technology maintains its worldwide headquarters in Camarillo, Calif., and product development teams in California; Berlin, Germany, and Florence, Italy. Sales and support operations are located in Europe, Asia, and North and South America. For additional information about DP Technology and ESPRIT, call +1-805-388-6000, send an e-mail to esprit@dptechnology.com, or visit the company Web site at www.dptechnology.com.

 

MEDIA CONTACT:                        

Stacey Wiebe

Public Relations Coordinator

DP Technology

(805) 388-6000

Email Contact

 

TECHNICAL CONTACT:

Chuck Mathews

Vice President

DP Technology

(805) 388-6000

Email Contact




Review Article Be the first to review this article
Teledyne Optech:

Harris

Jobs
GIS Analyst for G2 Partners LLC at San Ramon, CA
GIS Software Developer for UDC at Englewood, CO
Structural Engineer for Albert Kahn and Associates at Detroit, MI
Structural Engineer for The Planate Management Group LLC at Perry Point, MD
Senior Mechanical Engineer for Albert Kahn and Associates at Detroit, MI
Upcoming Events
6th International Colloquium on Scientific and Fundamental Aspects of GNSS / Galileo at Technical University of Valencia Valencia Spain - Oct 25 - 27, 2017
UnmannedCanada 2017 at Sheraton Parkway Toronto North Toronto Ontario Canada - Nov 1 - 3, 2017
Scientific Days of Geographical Applications, Geometric Sciences and Digital Technologies at HOTEL NIPPON TAKSIM ISTANBUL ISTANBUL Turkey - Nov 7 - 10, 2017
ACM SIGSPATIAL GIS 2017 at Los Angeles CA - Nov 7 - 10, 2017
Teledyne Optech
CADalog.com - Countless CAD add-ons, plug-ins and more.



Internet Business Systems © 2017 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation TechJobsCafe - Technical Jobs and Resumes  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise