Final Program Released for MAPPS/ASPRS Joint Specialty Conference in Tampa, Florida

October 24, 2012 -- In just a week geospatial professionals from around the world will come together in Tampa, Florida to learn about the revolution and evolution of cloud computing and other emerging new technologies impacting the geospatial practice at the 2012 MAPPS/ASPRS Joint Specialty Conference to be held October 29 through November 1.

Technical sessions during the conference will address the most pressing technologies and their applications including 3D, mobile mapping, cloud data management, unmanned aerial systems (UAS), lidar and the role of cloud computing with these technologies.

The conference will open with workshops covering such topics as mobile lidar, remote sensing, cloud computing, contracting for geospatial services, airborne flash lidar, and other technical topics. Further information on all of the pre-conference activities may be found at the conference web site www.asprs.org/Conferences/Tampa-2012.

Exciting networking events for students and professionals will take place throughout the conference and on the exhibit floor. A special UAV showcase has been included with the general exhibits highlighting the convergence of the new technology in the geospatial marketplace.

Dr. Gerald Bawden, with the U.S. Geological Survey (USGS), will provide the Keynote address on "Ultra-High Resolution Three and Four Dimensional Point Cloud Analysis Spanning the Earth Sciences.” Dr. Bawden will highlight how terrestrial lidar and laser scanning are enabling 3D site characterization and 4D change detection.

Jerry Johnston, geospatial information officer, U.S. Department of the Interior, will present the results of the National Enhanced Elevation Assessment (NEEA) and outline efforts to develop a national 3D elevation program (3DEP) based on the results of the study.

In addition to a variety of topics covered in the technical sessions, the conference offers a number of Special Sessions devoted to highlighting emerging trends in technologies that support geospatial applications

ASPRS will debut its Airborne Topographic Lidar Manual, the first comprehensive manual on airborne lidar technology and applications covering best practices and procedures for acquiring, processing and performing quality control and assurance. MAPPS will announce the winners of its annual Geospatial Products and Services Excellence Awards.

The concluding general session features members of MAPPS and ASPRS who will lead a discussion on the future of the geospatial profession, where the market is going, and how technology and the workforce are expected to evolve.

To view the final digital program, click here. The final program is also available on the conference web site at www.asprs.org/Conferences/Tampa-2012.

This significant conference is the seventh in a series that originated in 1994 as the American Society for Photogrammetry and Remote Sensing (ASPRS) and the Management Association for Private Photogrammetric Surveyors (MAPPS) began jointly hosting education conferences on emerging mapping and geospatial technologies and applications that have now become an integral part of our everyday lives. The conference seeks to bring geospatial producers, data users, managers, and imaging and geospatial information professionals together to present the latest developments.

About MAPPS

Formed in 1982, MAPPS is the only national association exclusively comprised of private firms in the remote sensing, spatial data and geographic information systems field in the United States. The MAPPS membership spans the entire spectrum of the geospatial community, including Member Firms engaged in satellite and airborne remote sensing, surveying, photogrammetry, aerial photography, LIDAR, hydrography, bathymetry, charting, aerial and satellite image processing, GPS, and GIS data collection and conversion services. MAPPS also includes Associate Member Firms, which are companies that provide hardware, software, products and services to the geospatial profession in the United States and other firms from around the world. Independent Consultant Members are sole proprietors engaged in consulting in or to the geospatial profession, or provides a consulting service of interest to the geospatial profession.

MAPPS provides its 160+ member firms opportunities for networking and developing business-to-business relationships, information sharing, education, public policy advocacy, market growth, and professional development and image enhancement.

About ASPRS

Founded in 1934, ASPRS is an international professional organization of 6,000 geospatial data professionals. ASPRS is devoted to advancing knowledge and improving understanding of the mapping sciences to promote responsible application of photogrammetry, remote sensing, geographic information systems and supporting technologies.

 

 




Review Article Be the first to review this article
HP

Harris

Featured Video
Jobs
Data Scientist for University of Utah at Salt Lake City, UT
Database Specialist for MDA Information Systems LLC at Gaithersburg, MD
Sr. GIS Technical Analyst for Southern California Edison SCE Transmission and Distribution Organization at Rosemead, CA
Imagery Analyst for ARA at Albuquerque, NM -1229, NM
Inside Sales for SolidCAM at Newtown, PA
Architect for North County Transit District at Oceanside, CA
Upcoming Events
2017 GIS/CAMA Technologies Conference at Chattanooga Convention Center Chattanooga Tennessee - Mar 6 - 9, 2017
IGTF 2017 ASPRS Annual Meeting 2017 at Marriot Waterfront Baltimore Baltimore MD - Mar 11 - 17, 2017
MAPPS Federal Programs Conference at Sheraton Hall Silver Spring Maryland - Mar 13 - 15, 2017
WorldCover 2017 Conference at ESRIN Italy - Mar 14 - 16, 2017
GENEQ
Teledyne:
xponential2017



Internet Business Systems © 2017 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation TechJobsCafe - Technical Jobs and Resumes  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy