Semtech Adds to its Transceiver Platform with the SX1235 Which Provides ETSI Category 1 Compliance

New Transceiver is Ideal for Social Alarms and Healthcare Monitoring; Meets ETSI Category 1 Standard with 6 dB Margin

CAMARILLO, Calif. -- 10 January, 2013 -- (BUSINESS WIRE) -- Semtech Corporation (Nasdaq: SMTC), a leading supplier of analog and mixed-signal semiconductors, today expanded its RFIC transceiver platform with the new SX1235, a fully integrated, high-performance, low current sub-GHz RF transceiver that provides ETSI category 1 compliance with 6 dB regulatory margin.

ETSI category 1 compliance is the highest transceiver rating for European regulations and is required for safety-critical wireless applications such as social alarms and healthcare monitoring. The SX1235 expands the target applications for Semtech's wireless platform and provides an affordable high-performance radio IC solution to monitor, serve and increase the safety of a rising aging population.

Previous category 1 solutions have only been realizable with large and expensive discrete solutions which are difficult to design and offer little flexibility, thus limiting the overall deployment of products designed to provide safety to the elderly and workers in hazardous conditions. An integrated solution with the SX1235 reduces the development time and cost with flexibility to tailor to multiple products leading to the expansion of products to serve this important market segment.

With an industry-leading 9.3 mA receive mode current consumption, the SX1235 is ideal for category 1 applications seeking the lowest consumption possible for maximum battery lifetime while giving the highest margin to the regulatory limits. Current consumption or power efficiency in both transmit and receive modes, determines the capacity of primary or secondary back-up battery cells used in category 1 products which have a significant influence on the cost of these systems.

"The SX1235's high performance and low current consumption confirm Semtech's position as a world leader in the field of low power transceivers with the most robust performance," said Hardy Schmidbauer, Semtech's Director of Wireless ISM Products. "With half the receiver consumption of competing devices, this technology allows reliable category 1 compliance in battery powered applications enabling miniaturized low power category 1 devices that were previously unattainable."

Key Features of the SX1235

  • +20 dBm maximum output power
  • -123 dBm sensitivity at 1.2 kbps
  • Low current consumption
    • 9.3 mA RX current
    • 100 nA sleep current
    • 28 mA TX current at +13 dBm
  • -12 dBm IIP3
  • 6 dB adjacent channel selectivity margin for category 1 compliance
  • 6 dB margin for 2 MHz category 1 blocking specification with specified SAW filter
  • 10 dB margin for 10 MHz category 1 blocking specification with specified SAW filter
  • 1.8 to 3.7 V supply range
  • Ultra-fast frequency hopping

Applications:

Home and Building Automation: Building Alarms Systems, Wireless Alarm

Medical: Medical Equipment, Healthcare Monitoring Systems

Pricing and Availability

The SX1235 (order code: SX1235IMLTRT) is available immediately in production quantities and is priced at $1.95 each in 10,000-piece lots. Semtech offers comprehensive design assistance, including field- and factory-based support. Data sheets, volume pricing, and delivery quotes, as well as evaluation kits and samples are available at www.semtech.com/info.

About Semtech

Semtech Corporation is a leading supplier of analog and mixed-signal semiconductors for high-end consumer, computing, communications and industrial equipment. Products are designed to benefit the engineering community as well as the global community. The company is dedicated to reducing the impact it, and its products, have on the environment. Internal green programs seek to reduce waste through material and manufacturing control, use of green technology and designing for resource reduction. Publicly traded since 1967, Semtech is listed on the NASDAQ Global Select Market under the symbol SMTC. For more information, visit http://www.semtech.com.


Contact:

Pauline Cadena
Semtech Corporation
Tel.: 805-389-2755
Email Contact




Review Article Be the first to review this article
Trimble

Harris

Featured Video
Jobs
GIS Software Developer for UDC at Englewood, CO
GIS Analyst for G2 Partners LLC at San Ramon, CA
Structural Engineer for Albert Kahn and Associates at Detroit, MI
Vice President, Transportation Services for Associated General Contractors of New York State at Albany, NY
ENVIRONMENTAL GRAPHIC DESIGNER for Blitz at San Francisco, CA
Upcoming Events
GIS-PRO 2017 at Jacksonville FL - Oct 23 - 26, 2017
GEO WEEK 2017 at Washington DC - Oct 23 - 27, 2017
Commercial UAV EXPO Americas at The Westgate Resort Las Vegas NV - Oct 24 - 26, 2017
6th International Colloquium on Scientific and Fundamental Aspects of GNSS / Galileo at Technical University of Valencia Valencia Spain - Oct 25 - 27, 2017
Teledyne Optech
Teledyne:
CADalog.com - Countless CAD add-ons, plug-ins and more.



Internet Business Systems © 2017 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation TechJobsCafe - Technical Jobs and Resumes  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise