Imec Teams With Cadence to Present Automated Design-for-Test (DFT) Solution for 3D Memory-on-Logic

Leuven, Belgium -- January 22, 2013 -- At the European 3D TSV Summit in Grenoble, France on January 22-23, 2013, imec, a world-leading nano-electronics research institute, today announced that together with Cadence Design Systems they have developed, implemented and validated an automated 3D Design-for-Test (DFT) solution to test logic-memory interconnects in DRAM-on-logic stacks. The solution, based on Cadence Encounter Test technology, was verified on an industrial test chip containing a logic die and a JEDEC-compliant Wide-I/O Mobile DRAM.

Memory-on-logic 3D stacks offer the possibility of heterogeneous integration with dense low-power inter-die interconnects. Hence, they are amongst the first 3D products that will come on the market, enabling next-generation high-performance low-power mobile applications. Recently, JEDEC has released a standard (JESD-229) for stackable Wide-I/O mobile dynamic random access memories (DRAMs) specifying the logic-memory interface. Unlike many previous DRAMs, the standard contains boundary scan features to facilitate interconnect testing. Imec and Cadence now present a design-for-test (DFT) architecture and corresponding automatic test pattern generation (ATPG) approach. It is an extension of their previously announced logic-on-logic 3D DFT architecture and it supports post-bond testing of the interconnects between the logic die and the DRAM stacked on top of it.

The solution implemented by Cadence and imec includes the generation of DRAM test control signals in the logic die and the inclusion of the DRAM boundary scan registers in the serial and parallel test access mechanisms (TAMs) of the 3D test architecture. The automated design for test solution has been validated on an industrial test chip. The design of the test chip is an interposer-based 3D stacked IC which includes a silicon interposer base die, a 94mm2 logic system-on-chip in 40nm technology, and a single Wide-I/O DRAM rank. The validation results show that the silicon area of the additional DFT wrapper is negligible compared to the total logic die size (<0.03%). Moreover, the test pattern generation was very efficient (tens of patterns, generated in only a few seconds) and effective (100% coverage of the targeted faults). All 3D-DFT logic in the logic die was automatically inserted with Cadence Encounter RTL Compiler while the Interconnect test patterns were generated with Encounter Test ATPG.

“This 3D memory-on-logic DFT solution is another big step forward toward market introduction of 3D-stacked IC for next-generation high–performance, low-power mobile applications,” said Bassilios Petrakis, product marketing director for the Encounter Test product family at Cadence. “Our collaboration with imec has enabled the creation of an industry-leading solution that enhances efficiencies of 3D-IC design for our customers.”

“Teaming up with Cadence enables us to automate the insertion of our DFT circuitry in a given design, and to automate the interconnect test pattern generation. Such automated flows make our technology valuable for the industry. We are confident that we can also handle the DFT features that start to emerge in other 3D memory standards,” said Erik Jan Marinissen, Principal Scientist at imec.

Part of the work has been performed in the project ESiP, which is co-funded by the ENIAC Joint Undertaking.

About imec

Imec performs world-leading research in nano-electronics. Imec leverages its scientific knowledge with the innovative power of its global partnerships in ICT, healthcare and energy. Imec delivers industry-relevant technology solutions. In a unique high-tech environment, its international top talent is committed to providing the building blocks for a better life in a sustainable society. Imec is headquartered in Leuven, Belgium, and has offices in Belgium, the Netherlands, Taiwan, US, China, India and Japan. Its staff of close to 2,000 people includes more than 600 industrial residents and guest researchers. In 2011, imec's revenue (P&L) was about 300 million euro. Further information on imec can be found at www.imec.be.


Contact:

Hanne Degans
External Communications Officer
Imec
T: +32 16 28 17 69
Mobile: +32 486 065 175
Email Contact




Review Article Be the first to review this article

Harris

Featured Video
Jobs
Geospatial Systems Administrator for BAE Systems Intelligence & Security at arnold, MO
Urban Designer - Urban Design/Planning for SERA Architects, Inc at Portland, OR
Upcoming Events
Geospatial World Forum 2018 at Hyderabad International Convention Centre Hyderabad India - Jan 16 - 19, 2018
2018 Annual Convention of Virginia Association of Surveyors at 24 S. Market St Staunton VA - Jan 18 - 20, 2018
International LiDAR Mapping Forum at Hyatt Regency 650 15th Street, Denver CO - Feb 5 - 7, 2018
2018 Los Angeles Geospatial Summit at USC Radisson Hotel 3540 S Figueroa St. Los Angeles CA - Feb 23, 2018
Teledyne Optech
CADalog.com - Countless CAD add-ons, plug-ins and more.



Internet Business Systems © 2017 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation TechJobsCafe - Technical Jobs and Resumes  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise