Synopsys’ Next Generation FPGA-Based Prototyping System Delivers 3x Speed Performance and Accelerates Hardware/Software Validation Tasks

If you’re an ASIC prototyping specialist or engineering manager responsible for hardware/software integration and validation,have you hit any of these problems recently during your prototyping project?

  1. Timing closure and I/O congestion problems limit the execution speed of the prototype.
  2. Every “RTL drop” from the design team (gated clocks, memory conversion, etc.) disrupts the prototype plan.
  3. Limited visibility, slow turnaround time, no correlation with RTL makes debug of live hardware too time-consuming.
  4. Designs are overflowing capacity of the FPGAs on our systems and planning a design across multiple devices is a chore.

Join Synopsys for a half-day seminar including a networking lunch and learn about the state-of-the art in FPGA-based prototyping based on high-capacity, high-performance Xilinx® Virtex-7 FPGAs. Learn how the latest multi-FPGA implementation software and new multi-FPGA debugging capabilities help to bring-up designs faster and accelerate availability for software development tasks. Understand new pin-sharing via high-speed multiplexing that improves interconnection performance up to 3 times. Understand how the combination of Synopsys design automation software, FPGA prototyping hardware and DesignWare IP help you to conquer prototyping needs up to 144M ASIC gates from small design IPs to multi-processor driven SoCs with numerous real world interfaces.

Register for this seminar.

Increase the productivity of ASIC prototyping:

  • The new scalable HAPS-70 solution – from IP to SoC validation
  • Higher prototyping performance through High Speed Time Domain Multiplexing (HSTDM)
  • Enhanced FPGA debug – Synopsys Verdi/Siloti/Identify integration, multi-FPGA debug, and high-capacity sample storage
  • Reducing the IP risk – Synopsys DesignWare IP validated on HAPS
  • Tools and helpers – shorten the ASIC-prototype bring-up time to expedite distribution to your software organization
  • Extending the ROI of FPGA-based prototypes
This seminar will contain live demos of:
  • Rapid bring-up self-checks with HAPS-aware bring-up utilities
  • JPEG video core validation via workstation-to-HAPS connectivity 
  • High-capacity debug sample storage using HAPS Deep Trace Debug

Who should attend this seminar?

  • ASIC prototyping and emulation specialists
  • SoC hardware engineers
  • Driver/firmware/software specialists
  • R&D and program managers

We look forward to seeing you at this seminar.

Best regards,


Agenda (July 24, 2013 / 9:30AM - 1:00PM )

9:30-9:35        Plenary Session and Welcoming

9:35-10:00       HAPS-70 modular & scalable hardware solution

10:00-10:30     Higher Performance with HSTDM 
                      Enhanced Multi FPGA Debugging

Demo:              Deep Trace Debug

10:30-10:45      Coffee Break

10:45-11:30      IP integration, Tools & Helpers
                       Demo bring-up utilities 
                       Demo JPEG video application                    

11:30-11:45       Extending ROI

11:45-12:00      Close & Q&A

12:00-1:00        Lunch – including networking session


Register for this seminar.



Synopsys, Inc.
Bldg. D, Classroom 10 
700 East Middlefield Rd,
Mountain View, CA 940430 

Review Article Be the first to review this article
Featured Video
Geospatial Analyst/Programmer for LANDIQ at Sacramento, California
GIS - Systems Analyst for City of Olathe at Olathe, Kansas
SENIOR GIS GAS SPECIALIST for James W. Sewall Company at , Any State in the USA
Mid-Level Mechanical Engineer for Kiewit at lenexa, Kansas
Mechanical Engineer for Allen & Shariff Corporation at Pittsburgh, Pennsylvania
System Designer/Engineer for Bluewater at Southfield, Michigan
Upcoming Events
FME World Tour 2018 at Munich Germany - Apr 17, 2018
FME World Tour 2018 at Berlin Germany - Apr 18, 2018
GEOINT 2018 Symposium at 333 S Franklin St Tampa FL - Apr 22 - 25, 2018
FME World Tour 2018 at Frankfurt Germany - Apr 24, 2018
Canon: oce crystalPoint
Teledyne Optech - Countless CAD add-ons, plug-ins and more.

Internet Business Systems © 2018 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation TechJobsCafe - Technical Jobs and Resumes  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise