National Instruments Redesigns NI CompactRIO From the Inside Out

The new NI cRIO-9068 software-designed controller is part of the most advanced and open system design platform for embedded control and monitoring systems.

AUSTIN, Texas, Aug. 6, 2013 — (PRNewswire) — NIWeek -- National Instruments (Nasdaq: NATI) today announced the new NI cRIO-9068 software-designed controller, which is completely redesigned but maintains full NI LabVIEW and I/O compatibility with the CompactRIO platform. The controller integrates state-of-the-art technologies including the Xilinx Zynq-7020 All Programmable system on a chip (SoC), which combines a dual-core ARM® Cortex-A9 processor and Xilinx 7 Series FPGA fabric.

AUSTIN, Texas, Aug. 6, 2013 To view the multimedia assets associated with this release, please visit: http://www.multivu.com/mnr/62759-national-instruments-redesigns-ni-compactrio-software-controller-platform

"Within 24 hours of receiving a cRIO-9068 controller, we ran our existing LabVIEW application software without any problems," said Bob Leigh, president and CEO of LocalGrid™ Technologies. "We were impressed by the easy software transition between CompactRIO systems and by the incredible performance improvement of the new software-designed controller."

Based on the LabVIEW reconfigurable I/O (RIO) architecture, the new CompactRIO controller helps meet any demanding embedded control and monitoring task without wasting development time and cost. Engineers and scientists worldwide use the CompactRIO platform to build systems that can suppress fires on cargo airplanes, generate electricity through the flight of tethered kites and precisely stack 20 tons of wet concrete.

The new cRIO-9068 controller features:

  • Four times faster performance than previous generations, powered by a 667 MHz dual-core ARM Cortex-A9 processor and Xilinx Artix-7 FPGA
  • New Linux-based, real-time OS that provides greater flexibility for both LabVIEW Real-Time and C/C++ application developers
  • Extended operating temperature range of -40 degrees C to 70 degrees C
  • Consistent LabVIEW programming experience that ensures both new and existing designs take full advantage of updated technology with minimal effort

"Because so many customers have invested in CompactRIO, we took this redesign extremely seriously," said David Fuller, vice president of applications and embedded software at National Instruments. "Our R&D teams re-examined every part of the controller's design and made sweeping improvements while maintaining complete backward code compatibility."

The cRIO-9068 controller, programmed with LabVIEW system design software, enables engineers and scientists to use a single, graphical development environment to take advantage of improved hardware performance. LabVIEW 2013 support for the NI Linux Real-Time OS gives developers access to a rich set of community-sourced libraries and applications to augment their control and monitoring systems. LabVIEW 2013 also offers expanded connectivity options including improved web service creation and secure, industry-standard WebDAV browser-based file management.

"Although this controller looks similar to other CompactRIO devices, the technology under the hood is revolutionary," said Wolfram Koerver, executive director of S.E.A. "With this platform we can provide software technologies to our customers which were almost impossible before or would have required a long development time and high investment."

See the cRIO-9068 controller in detail at www.ni.com/crio-9068.

About National Instruments
Since 1976, National Instruments ( www.ni.com) has equipped engineers and scientists with tools that accelerate productivity, innovation and discovery. NI's graphical system design approach to engineering provides an integrated software and hardware platform that speeds the development of any system needing measurement and control. The company's long-term vision and focus on improving society through its technology supports the success of its customers, employees, suppliers and shareholders.

CompactRIO, LabVIEW, National Instruments, NI, ni.com and NIWeek are trademarks of National Instruments. Other product and company names listed are trademarks or trade names of their respective companies.

Contact: Email Contact, (512) 683-6394

SOURCE National Instruments

Contact:
National Instruments
NIWeek
Web: http://www.ni.com




Review Article Be the first to review this article
Trimble

Harris

Featured Video
Jobs
Mechanical Engineer I for Air Techniques, Inc at Melville, NY
Proposal Support Coordinator for Keystone Aerial Surveys at Philadelphia, PA
Upcoming Events
GeoIntelligence Asia Pacific Forum 2017 at Putrajaya International Convention Centre Putrajaya Malaysia - Aug 23, 2017
2017 Utah Drone Summit, Aug 25-26, 2017, Salt Palace Convention Center, Salt Lake City, Utah at Salt Palace Convention Center 100 S W Temple Salt Lake City Utah - Aug 25 - 26, 2017
Esri GeoConX Conference 2017 at Chicago Illinois - Sep 5 - 8, 2017
Canon
Teledyne Optech
University of Denver GIS Masters Degree Online
InterGeo 2017
InterDrone2017
CADalog.com - Countless CAD add-ons, plug-ins and more.



Internet Business Systems © 2017 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation TechJobsCafe - Technical Jobs and Resumes  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy