SMIC Reports Unaudited Results for the Three Months Ended June 30, 2013

-- Revenue of $541.3 million in 2Q13, representing the fifth consecutive quarter of record high revenue, an increase of 28.3 % year over year, and up 7.9 % quarter over quarter.

(PRNewswire) — Semiconductor Manufacturing International Corporation (NYSE: SMI; SEHK: 981) ("SMIC" or the "Company"), one of the leading semiconductor foundries in the world, today announced its consolidated results of operations for the three months ended June 30, 2013.

Third Quarter 2013 Guidance:

The following statements are forward looking statements which are based on current expectations and which involve risks and uncertainties, some of which are set forth under "Safe Harbor Statements" below.

  • Excluding wafer shipments from Wuhan Xinxin which is expected to gradually phase out starting in 3Q13, revenue is expected to be down 1% to up 2% quarter over quarter.
  • Revenue including wafer shipments from Wuhan Xinxin is expected to be down 3% to flat quarter over quarter.
  • Gross margin excluding wafer shipments from Wuhan Xinxin is expected to range from 18.5% to 21.5%.
  • Gross margin including Wuhan Xinxin is expected to range from 17.5% to 20.5%
  • Operating expenses excluding the effect of foreign exchange, funding of R&D contracts from the government and gain from the disposal of living quarters are expected to range from $81 million to $85 million.

Dr. Tzu-Yin Chiu, SMIC's Chief Executive Officer and Executive Director, commented, "I am very pleased to report that SMIC has exceeded expectations and again achieved record high revenue of $541.3 million in the second quarter of 2013, representing year over year growth of 28.3% and sequential growth of 7.9%. The utilization increased to 98.5% in 2Q 2013 compared to 95.2% in 2Q 2012 and 89.0% in 1Q 2013. Both gross profit and profit from operations reached record highs of $135.2 million and $79.1 million respectively. "

"Revenue from our China customers grew 14.3% sequentially and 60.6% year-over-year, contributing 40.9% of total revenue in the second quarter of 2013, an all-time high. Our 40/45nm revenue grew 71.9% sequentially contributing 10.0% of total wafer revenue compared to 6.4% in the first quarter of 2013. "

"Demand for our differentiated applications continues to be strong, especially in the areas of power management. CMOS Image Sensor, and EEPROM. In order to further capture the market opportunities and to enhance our position in differentiated technologies, we are looking into various opportunities to expand our 8-inch capacity. "

Conference Call / Webcast Announcement

Date: August 9, 2013



Time: 8:30 a.m. Shanghai time



Dial-in numbers and pass code:






China                                       

400-620-8038                

(Pass code: SMIC)

Hong Kong                               

852-2475-0994              

(Pass code: SMIC)

Taiwan                                     

886-2-2650-7825           

(Pass code: SMIC)

United States, New York           

1-845-675-0437             

(Pass code: SMIC)

The call will be webcast live with audio at http://www.smics.com/eng/investors/ir_presentations.php or http://www.media-server.com/m/p/8s7n2w4d.

An archived version of the webcast, along with an electronic copy of this news release will be available on the SMIC website for a period of 12 months following the webcast.

About SMIC

Semiconductor Manufacturing International Corporation ("SMIC"; NYSE: SMI; SEHK: 981) is one of the leading semiconductor foundries in the world and the largest and most advanced foundry in mainland China, providing integrated circuit (IC) foundry and technology services at 0.35-micron to 40-nanometer. Headquartered in Shanghai, China, SMIC has a 300mm wafer fabrication facility (fab) and a 200mm mega-fab in Shanghai, a 300mm mega-fab in Beijing, a 200mm fab in Tianjin, and a 200mm fab project under development in Shenzhen. SMIC also has customer service and marketing offices in the U.S., Europe , Japan , and Taiwan , and a representative office in Hong Kong .

1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10  Next Page »



Review Article Be the first to review this article
Harris

Featured Video
Jobs
Avionics System Engineer for BAE Systems Intelligence & Security at Arlington, VA
Senior Mechanical Engineer for BAE Systems Intelligence & Security at Arlington, VA
Geospatial Systems Administrator for BAE Systems Intelligence & Security at arnold, MO
Geospatial Analyst - Senior for BAE Systems Intelligence & Security at Springfield, VA
Mechanical Design Engineer 3 for KLA-Tencor at Milpitas, CA
System Designer/Engineer for Bluewater at Southfield, MI
Upcoming Events
ArcGIS: Introduction at Environmental and Natural Resource Building 14 College Farm Rd New Brunswick NJ - Feb 1 - 22, 2018
International LiDAR Mapping Forum at Hyatt Regency 650 15th Street, Denver CO - Feb 5 - 7, 2018
Automated ISR & Battle Management Summit at Mary M. Gates Learning Center Alexandria VA - Feb 13 - 14, 2018
2018 Los Angeles Geospatial Summit at USC Radisson Hotel 3540 S Figueroa St. Los Angeles CA - Feb 23, 2018
Teledyne Optech
Teledyne:
CADalog.com - Countless CAD add-ons, plug-ins and more.



Internet Business Systems © 2018 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation TechJobsCafe - Technical Jobs and Resumes  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise