Toshiba Starts Sample Shipments of Multi-Output System Power Supply ICs with Enhanced Monitoring Functions for Automotives

Contributes to Functional Safety of Road Vehicles

TOKYO — (BUSINESS WIRE) — October 28, 2013Toshiba Corporation (TOKYO:6502) today announced the launch of “TB9042FTG”, a multi-output system power supply IC that enhances monitoring functions in general automotive applications. Sample shipments will start on November 1, 2013, with mass production scheduled to start in May 2014.

Toshiba: "TB9042FTG", a multi-output system power supply IC that enhances monitoring functions in ge ...

Toshiba: "TB9042FTG", a multi-output system power supply IC that enhances monitoring functions in general automotive applications (Photo: Business Wire)

The increasing importance of ISO 26262, the international standard for “Road Vehicles – Functional Safety”, requires monitoring of the functions of power supply ICs. The new IC incorporates multiple monitoring functions that detect any malfunctions of the IC and external microcontrollers. It also integrates a transmitting function that transfers data on monitoring status to an external microcontroller, which further supports improved safety.

Increasingly higher current is required for automotive applications. The IC’s built-in highly electrically efficient DC-DC converters reduce power consumption, and its series regulators realize low noise power supply.

Key Features of New Product

1. Enhanced monitoring functions
The product incorporates abnormality detection for each output and transmits the detected data from either the SPI terminal or a special terminal dedicated to abnormality signals.
An integrated diagnostic function monitors malfunction of the IC by comparing its data and signals from a microcontroller, helping to realize automotive functional safety.

2. Built-in 2 channels of DC-DC converters (1 output)
One DC-DC converter steps down power supply from the vehicle battery to 6V; the other converter steps that down to 1.2V or 1.5V (selectable) for the microcontroller core.

3. Built-in 3 channels of series regulators for external power supply (3 outputs)
The two series regulators convert the 6V supply from the DC-DC converter and independently provide constant 5V supplies: 400mA current capacity is used for the microcontroller, and 100mA current capacity is used for a sensor or other interface.
The other series regulator takes power from the battery and supplies 5V or 3.3V power (selectable), which is used as back-up power supply to protect the microcontroller’s RAM data.

 

Main Specifications

     
Part number   TB9042FTG
Mass Production Volume 2 million pieces per year
Channels Built-in 2-channel DC-DC converters

Built-in 3-channel LDOs

Stand-by Current

250μA (max) (at stand-by mode, Ta=-40 to 125°C )

It includes the input current at CTL2 and SVBU terminals.

Operating Voltage Range +7.0 to 20.1V
Operating Temperature Range -40 to 125°C
Current Capability Equipped with multi-output power supply in one IC to realize current capability of 1A class.
Safety Functions A variety of built-in monitoring and detecting functions for safety.
Detection Circuits

- Output voltage detector (overvoltage and undervoltage) and diagnostic circuit

- Inrush current limiter, IC thermal shutdown circuit

- Watchdog timer (2 independent circuits)

- Power-on reset

- Monitoring of alarm signal from MCU

- Diagnostic function from MCU signal

Package   HQFN52 (8mm x 8mm x 0.9mm)
 

1 | 2  Next Page »



Review Article Be the first to review this article
Trimble

Harris

Featured Video
Jobs
Geospatial Analyst - Senior for BAE Systems Intelligence & Security at Springfield, VA
Senior Mechanical Engineer for BAE Systems Intelligence & Security at Arlington, VA
Geospatial Systems Administrator for BAE Systems Intelligence & Security at arnold, MO
Sr Mechanical Design Engineer for Medtronic at mounds view, MN
Mechanical Design Engineer 3 for KLA-Tencor at Milpitas, CA
Urban Designer - Urban Design/Planning for SERA Architects, Inc at Portland, OR
Upcoming Events
Geospatial World Forum 2018 at Hyderabad International Convention Centre Hyderabad India - Jan 16 - 19, 2018
2018 Annual Convention of Virginia Association of Surveyors at 24 S. Market St Staunton VA - Jan 18 - 20, 2018
ArcGIS: Introduction at Environmental and Natural Resource Building 14 College Farm Rd New Brunswick NJ - Feb 1 - 22, 2018
International LiDAR Mapping Forum at Hyatt Regency 650 15th Street, Denver CO - Feb 5 - 7, 2018
Teledyne Optech
University of Denver GIS Masters Degree Online
Teledyne:
CADalog.com - Countless CAD add-ons, plug-ins and more.



Internet Business Systems © 2017 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation TechJobsCafe - Technical Jobs and Resumes  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise