Mentor Graphics Nucleus Innovate Program With Atmel Provides Integrated Solution for Internet-of-Things (IoT) Application Development

WILSONVILLE, Ore., April 29, 2014 — (PRNewswire) — Mentor Graphics Corporation (NASDAQ: MENT) today announced that Atmel Corporation is part of the Mentor® Embedded Nucleus® Innovate Program targeting the emerging Internet of Things (IoT) market. The Nucleus Innovate Program provides a free license of the industry-leading Mentor Embedded Nucleus RTOS and Sourcery™ CodeBench tools for Atmel's SAM3x and SAM4x microcontroller (MCU) devices for businesses under $1M in annual revenue to kick-start their embedded projects. Mentor Graphics' collaboration with Atmel will accelerate the development of medical, industrial, smart energy,  and consumer applications, powering the next generation of devices for IoT.

Mentor Graphics logo.

"We see tremendous value in the Nucleus Innovate Program with our high-performance MCUs which provide optimized connectivity for IoT development," stated Steve Pancoast, vice president of software tools and applications, Atmel.  "Mentor's market-leading Nucleus RTOS and Sourcery CodeBench tools supporting our advanced devices will help small businesses realize the potential of their innovative ideas."

With the emergence of internet-enabled and networked devices that can communicate with each other, these small businesses and start-ups can take advantage of the Mentor Embedded Innovate Program to initiate new IoT product development. A board support package (BSP) will be available for Atmel's SAM3X ARM Cortex M3 MCUs and SAM4X Cortex-M4 MCUs. Atmel's device families, combined with the Mentor Embedded RTOS and tools, are ideal for applications that require high-performance connectivity, power efficiency and high memory densities for today's advanced connected devices. As a result, embedded developers have a complete embedded environment to develop their system designs leveraging Atmel MCUs with advanced efficiency and productivity.

"Our Nucleus Innovate Program with Atmel will give small businesses a competitive edge in developing leading-edge products, including applications for IoT," said Scot Morrison, general manager of runtime solutions, Mentor Graphics Embedded Software division. "We want to be at the forefront of helping these businesses realize their design ideas without having to worry about the capital required to use best-in-class MCUs, RTOS and embedded software development tools."

The Nucleus Innovate Program is ideal for applications where small footprint, high-performance, and low power matter. Customers using Atmel MCUs can apply the Nucleus RTOS and Mentor Embedded tool capabilities with ease and assurance. Easy-to-use demonstrations and configurations help shorten development time for medical, industrial, automotive and consumer applications—from days to minutes. The Nucleus Innovate Program for Atmel MCUs is a one-year license agreement and includes one BSP.  Details on qualification and the software provided through the Nucleus Innovate Program are available at http://www.mentor.com/embedded-software/nucleus/innovate/atmel  

About Mentor Embedded
The Mentor Graphics® Embedded Software Division enables embedded development for a variety of applications including automotive, industrial, smart energy, medical devices, and consumer electronics. Embedded developers can create systems with the latest processors and micro-controllers with commercially supported and customizable Linux® based solutions including the industry leading Sourcery CodeBench and Mentor Embedded Linux products. For real-time control, systems developers can take advantage of the small foot-print and low-power-capable Nucleus RTOS. For more information, visit www.mentor.com/embedded.

About Mentor Graphics
Mentor Graphics Corporation (NASDAQ: MENT) is a world leader in electronic hardware and software design solutions, providing products, consulting services and award-winning support for the world's most successful electronics and semiconductor companies. Established in 1981, the company reported revenues over the last 12 monthsin excess of $1.15 billion. Corporate headquarters are located at 8005 S.W. Boeckman Road, Wilsonville, Oregon 97070-7777. World Wide Web site: http://www.mentor.com/.

Mentor Graphics, Mentor and Nucleus are registered trademarks and Sourcery is a trademark of Mentor Graphics Corporation. All other company or product names are the registered trademarks or trademarks of their respective owner.

The registered trademark Linux® is used pursuant to a sublicense from LMI, the exclusive licensee of Linus Torvalds, owner of the mark on a worldwide basis.

For more information, please contact:
Larry Toda
Mentor Graphics
503.685.1664
Email Contact

Logo - http://photos.prnewswire.com/prnh/20140317/AQ83812LOGO

SOURCE Mentor Graphics Corporation

Contact:
Mentor Graphics Corporation
Atmel Corporation

 




Review Article Be the first to review this article

Harris

Featured Video
Jobs
Geospatial Analyst/Programmer for LANDIQ at Sacramento, California
GIS Data Analyst for CostQuest Associates, Inc. at Cincinnati, Ohio
Product Manager for CHA Consulting, Inc. at Boston, Massachusetts
Software Developer for CHA Consulting, Inc. at Norwell, Massachusetts
Mid-Level Mechanical Engineer for Kiewit at lenexa, Kansas
System Designer/Engineer for Bluewater at Southfield, Michigan
Upcoming Events
Locate 2018 at Pier 27, The Embarcadero San Francisco CA - May 30 - 31, 2018
2nd WY UAV Symposium at UW Convention Center 2229 Grand Ave LARAMIE WY - May 30 - 31, 2018
GeoIntelligence Asia at NEW DELHI India - Jun 4 - 5, 2018
SPAR 3D & AEC Next Technology Expo + Conference at Anaheim Convention Center Anaheim CA - Jun 5 - 7, 2018
University of Denver GIS Masters Degree Online
Bentley: -YII 2018 Awards
Interdrone 2018



Internet Business Systems © 2018 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation TechJobsCafe - Technical Jobs and Resumes  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise