Cadence Announces Protium Rapid Prototyping Platform and Expands System Development Suite Low-Power Verification

Highlights

SAN JOSE, Calif., July 17, 2014 — (PRNewswire) — Cadence Design Systems, Inc. (NASDAQ: CDNS), a leader in global electronic design innovation, today announced an expansion of its System Development Suite with the addition of the new Cadence® Protium™ rapid prototyping platform for improved software development productivity, and IEEE 1801 low power standard support in Cadence Palladium® XP II verification computing platform. These expansions to the Cadence System Development Suite enable system and semiconductor companies in the mobile, consumer, networking and storage segments to efficiently address important design challenges such as early software bring-up and reduced power consumption.

Cadence Logo

Built using Xilinx® Virtex®-7 2000T FPGAs, the Protium platform is Cadence's second-generation FPGA prototyping platform for software development. It improves productivity by reducing prototype bring-up time by up to 70 percent versus competitive solutions, shortening the process from months to weeks. Featuring Palladium flow compatibility, a 4X increase in capacity versus the previous generation, and support for up to 100 million gates, the Protium platform enables software development and throughput regressions supported by a fully automatic flow and the capability to execute user-driven performance optimizations. The Protium platform also provides automated memory compilation, external bulk memory support, and RTL name preservation throughout the flow, which minimizes the tedious and error-prone manual FPGA bring-up steps, thereby speeding up time to market.

"The ability to use the same bring-up flow for Palladium emulation and Protium rapid prototyping, allows our design teams to switch seamlessly between the two execution engines, which reduces the prototype bring-up time from months to weeks compared to traditional FPGA-based prototyping approaches," said Hideya Sato, deputy executive general manager, Global MONOZUKURI Division, Information & Telecommunication Systems Company, Hitachi, LTD. "Additionally we expect to improve overall development productivity by extending the use of Protium rapid prototyping platform to the area of hardware/software co-verification."

"The growing need for software and hardware verification continues to drive the use of FPGA-based ASIC prototyping, from emulation and prototyping to mass production applications," said Arun Iyengar, vice president, A&D, ISM and TM&E markets for Xilinx.  "Cadence's approach to unify hardware verification using Palladium emulation and software development using Protium prototyping will further streamline the customer's time to market while improving product quality."

Low-power analysis and verification is a key part of system and system-on-chip (SoC) signoff criteria. Addressing this, Cadence has expanded the Dynamic Power Analysis in the Palladium XP II platform beyond Common Power Format (CPF) support, adding verification and debug support for the IEEE 1801 standard. The Cadence System Development Suite now offers an integrated and consistent low-power flow for engineers using either of the power standards across the Incisive® formal and simulation and Palladium platforms, with common power plan and metrics, and integrated debug analysis.

For more information about the Protium rapid prototyping platform, low power support in the Palladium XP II platform, and the Cadence System Development Suite, visit www.cadence.com/news/protium.

About Cadence

Cadence enables global electronic design innovation and plays an essential role in the creation of today's integrated circuits and electronics. Customers use Cadence software, hardware, IP, and services to design and verify advanced semiconductors, consumer electronics, networking and telecommunications equipment, and computer systems. The company is headquartered in San Jose, Calif., with sales offices, design centers, and research facilities around the world to serve the global electronics industry. More information about the company, its products, and services is available here.

© 2014 Cadence Design Systems, Inc. All rights reserved worldwide. Cadence, the Cadence logo, Incisive and Palladium are registered trademarks of, and Protium is a trademark of, Cadence Design Systems, Inc. in the United States and other countries.  All other trademarks are the property of their respective owners.

For more information, please contact:
Cadence Newsroom
408-944-7039
Email Contact

SOURCE Cadence Design Systems, Inc.

Contact:
Cadence Design Systems, Inc.
Web: http://www.cadence.com




Review Article Be the first to review this article
Trimble

Harris

Featured Video
Jobs
GIS Software Developer for UDC at Englewood, CO
GIS Analyst for G2 Partners LLC at San Ramon, CA
Structural Engineer for The Planate Management Group LLC at Perry Point, MD
Structural Engineer for Albert Kahn and Associates at Detroit, MI
Mechanical Engineer for The Planate Management Group LLC at Perry Point, MD
ENVIRONMENTAL GRAPHIC DESIGNER for Blitz at San Francisco, CA
Upcoming Events
GIS-PRO 2017 at Jacksonville FL - Oct 23 - 26, 2017
GEO WEEK 2017 at Washington DC - Oct 23 - 27, 2017
Commercial UAV EXPO Americas at The Westgate Resort Las Vegas NV - Oct 24 - 26, 2017
6th International Colloquium on Scientific and Fundamental Aspects of GNSS / Galileo at Technical University of Valencia Valencia Spain - Oct 25 - 27, 2017
Teledyne Optech
CADalog.com - Countless CAD add-ons, plug-ins and more.



Internet Business Systems © 2017 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation TechJobsCafe - Technical Jobs and Resumes  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise