HOUSTON, TX -- (Marketwired) -- Nov 11, 2014 -- Intergraph will host a CAESAR II webinar on November 18, 2014 at 10:00 a.m. CT that will discuss how to resolve non-linear situations that can occur during pipe stress analysis of models that cause non-convergence conditions and failure to launch. While CAESAR II can model many of these nonlinear restraint conditions that occur in the field such as liftoff supports, gaps and restraints and friction that can be resolved using the F=KX approach, sometimes the interaction of these nonlinear conditions and the applied loads cannot be resolved with this approach used by most pipe stress packages today. The webinar will discuss this issue and provide an approach for resolving the failure to launch problem. The webinar leader will be David Diehl, the lead instructor for CAESAR II and the manager of all training for Intergraph CADWorx & Analysis Solutions.
For more information about the webinar, visit http://coade.typepad.com/coadeinsider/2014/11/caesar-ii-webinar-failure-to-launch-resolving-non-convergence-in-caesar-ii.html. For a link to register, visit http://icas.intergraph.com/f2lcii. For information on Intergraph analysis products visit http://www.intergraph.com/ppm/analysis.aspx. For more information on Intergraph CADWorx, visit http://www.intergraph.com/products/ppm/cadworx/.
About Intergraph CADWorx & Analysis Solutions
Intergraph CADWorx & Analysis Solutions products allow design and engineering to share relevant information seamlessly, thereby maintaining accuracy and improving efficiency. These include CADWorx® Plant Design Suite, for AutoCAD®-based intelligent plant design modeling, process schematics and automatic production of plant design deliverables; CADWorx DraftPro®, for intelligent 2D design and layout; CAESAR II®, the world's most widely used pipe stress analysis software; PV Elite®, for vessel and exchanger design and analysis; TANK™, for the design and analysis of oil storage tanks; and GT STRUDL®, one of the most trusted, adaptable and fully-integrated structural analysis solutions in the world.
Intergraph, the Intergraph logo, CADWorx, CAESAR II, PV Elite, DraftPro and GT STRUDL are registered trademarks, and TANK is a trademark of Intergraph Corporation. Other brands and product names are trademarks of their respective owners. © 2014 Intergraph Corp. All rights reserved.