USGS evaluates Sigma Space’s Single Photon LiDAR as a key technology for its 3D Digital Elevation Program

 

Sigma Space technology may enable first high-resolution 3D map of the Unites States and the Planet

Through a recent contract awarded to two evaluating companies, the United States Geological Survey has requested from Sigma Space the collection and processing of  Single Photon LiDAR (SPL) in a test area in upper Connecticut. SPL is a disruptive LiDAR technology created by Sigma, which enables collection of elevation data at much higher speeds and resolution than conventional LiDAR systems. While SPL is by now a well developed technology in use by the US DoD and in commercial data acquisitions, this is the first attempt by USGS to validate the technology as an enabler for its  3DEP program. The 3DEP program by USGS aims to create a comprehensive 3D map of the US.

“The key concept behind the high efficiency of SPL is the ability to use single photons, elementary light particles, to make a range measurement,” explains Dr. Marcos Sirota, CEO of Sigma Space. “Conventional LiDARs use hundreds or thousands of photons per measurement. That is why our system is so much faster. Furthermore, the detector physics and associated electronics enables our system to operate in full daylight, in comparison to other photon-sensitive technologies that can operate only at night,” he added. Also, because SPL uses green laser light it has both topographic and bathymetric capabilities in a single LiDAR.

After receiving the request, and one coordination phone call with USGS and the evaluating companies, Sigma Space personnel were able to collect SPL data for the entire 500 square mile test area in one weekend, with densities in excess of 20 points per square meter. In addition, they simultaneously collected RGB imagery for a large part of the test area at 4 cm resolution, using a MIST camera, courtesy of Visionmap.

SPL technology is also to be proven soon in space. NASA’s  ICESat II mission, to be launched in 2017, adopted SPL as the LiDAR technique for its Advanced Topographic Laser Altimeter. The primary objective of the mission is to measure polar ice sheet elevation change and sea ice thickness. Sigma provided the timing and on-board processing electronics for the 64 channel, single photon LiDAR system. Sigma also provided the optical assembly for the pointing determination system which tracks the laser and telescope pointing with respect to the star field, in the instrument.

Sigma Space Corporation produces next-generation LiDAR, laser ranging, attitude determination, spectroscopy, radiometry, and optical communication instrumentation for remote sensing and defense applications. Sigma Space offers advanced science, engineering and geospatial data services to private and government clients, including NASA and DoD.  www.sigmaspace.com

Contacts

Sigma Space
Natalie Lau, 301-552-6000

Source: Sigma Space Corporation



Review Article Be the first to review this article

Harris

Featured Video
Jobs
Water Quality Analyst for City of Arvada at Arvada, Colorado
Geographical Information System (GIS) Analyst for State of South Dakota at Pierre, South Dakota
Geographic Information System (GIS) Analyst for SHRA at Sacramento, California
GIS Analyst for Dekalb County at Decatur, Georgia
MECHANICAL ENGINEER for VEi Global, Inc. at Fargo, North Dakota
Senior Engineer for Specsys inc at Montevideo, Minnesota
Upcoming Events
International LiDAR Mapping Forum 2019 at Hyatt Regency Denver Colorado Convention Center, 650 15th Street Denver CO - Jan 28 - 30, 2019
Defence Geospatial Intelligence (DGI) 2019 at Royal Lancaster London London United Kingdom - Jan 28 - 30, 2019
DistribuTECH 2019 at Ernest N. Morial Convention Center New Orleans LA - Feb 5 - 7, 2019
ArcGIS: Introduction at Environmental and Natural Resource Building New Brunswick NJ - Feb 7 - 28, 2019
University of Denver GIS Masters Degree Online



Internet Business Systems © 2019 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation TechJobsCafe - Technical Jobs and Resumes  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise