Garmin® responds to misleading statements from Navico in the ITC patent investigation

OLATHE, Kan. — (BUSINESS WIRE) — August 29, 2016 — Garmin International Inc., a unit of Garmin Ltd. (NASDAQ: GRMN), today announced its response to a modified order by the International Trade Commission (ITC) on August 18, 2016, in the long-running investigation brought by Navico Holdings AS against Garmin. The modified ITC order did not address Garmin’s new tilted DownVü™ scanning sonar transducer design – which Garmin strongly asserts does not infringe – that has been shipping since last December when the previous decision was made by the ITC. The status of Garmin’s new tilted transducer design relative to any of Navico’s patents is still a matter pending before the courts and government agencies, and Navico has never accused Garmin’s new tilted design of infringement before the ITC. On August 25, 2016, Navico issued a press release regarding the ITC’s modified order that incorrectly asserts that the new tilted design infringes on their patents as no court or government agency has ever made any infringement ruling on Garmin’s new tilted transducer design.

In fact, the modified ITC order confirmed the ITC’s previous decision made in December 2015, that Garmin can import and sell Garmin DownVü scanning sonar transducers, including the original design, because they do not separately infringe any valid claim of Navico’s patents. The modified ITC order also left in place the ITC’s earlier decision that Garmin’s chartplotters do not infringe any of Navico’s patents. It clarifies the certification language that Garmin may use when importing its transducers which is a procedural matter. The modified ITC order applies only to Garmin and has no impact on any existing distributor, dealer, or retailer inventory or any products already purchased by our customers.

Garmin fully cooperated with U.S. Customs and Border Patrol (CBP) after the ITC’s original order to ensure that the importation of its products was in full compliance with the ITC’s order. Garmin is currently cooperating with CBP to ensure compliance with the ITC’s modified order and will provide relevant information to our distributors, dealers, and retailers as it becomes available.

All of these issues are currently pending before the Court of Appeals for the Federal Circuit, the court with review authority over the ITC, and Garmin anticipates a definitive ruling on these topics in early 2017.

About Garmin International Inc. Garmin International Inc. is a subsidiary of Garmin Ltd. (Nasdaq: GRMN). Garmin Ltd. is incorporated in Switzerland, and its principal subsidiaries are located in the United States, Taiwan, and the United Kingdom. Garmin is a registered trademark and DownVü is a trademark of Garmin Ltd. or its subsidiaries.

All other brands, product names, company names, trademarks, and service marks are the properties of their respective owners. All rights reserved.

Notice on Forward-Looking Statements:

This release includes forward-looking statements regarding Garmin Ltd. and its business. Such statements are based on management’s current expectations. The forward-looking events and circumstances discussed in this release may not occur and actual results could differ materially as a result of known and unknown risk factors and uncertainties affecting Garmin, including, but not limited to, the risk factors listed in the Annual Report on Form 10-K for the year ended December 26, 2015, filed by Garmin with the Securities and Exchange Commission (Commission file number 0-31983). A copy of such Form 10-K is available at http://www.garmin.com/aboutGarmin/invRelations/finReports.html. No forward-looking statement can be guaranteed. Forward-looking statements speak only as of the date on which they are made and Garmin undertakes no obligation to publicly update or revise any forward-looking statement, whether as a result of new information, future events, or otherwise.



Contact:

Garmin International Inc.
Carly Hysell, 913-397-8200
Email Contact




Review Article Be the first to review this article
Harris


Featured Video
Jobs
Business Partner Manager for Cityworks - Azteca Systems, LLC at Sandy, UT
GIS Analyst II for Air Worldwide at Boston, MA
Mechanical Engineer for IDEX Corporation at West Jordan,, UT
Senior Structural Engineer for Design Everest at San Francisco, CA
Upcoming Events
RoboUniverse San Diego at San Diego CA - Dec 14 - 15, 2016
DGI 2017 at QEII Centre London United Kingdom - Jan 23 - 25, 2017
Geospatial World Forum 2017 Hyderabad at Hyderabad International Convention Center P.O Bag 1101, Cyberabad Post Office Hyderabad Telangana India - Jan 23 - 25, 2017
Trimble
Teledyne Optech
University of Denver GIS Masters Degree Online
CADalog.com - Countless CAD add-ons, plug-ins and more.



Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation TechJobsCafe - Technical Jobs and Resumes  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy