Lead’Air Creates an Unparalleled Multi-use “HELIDAS” Oblique Camera System for Helicopter and Fixed-wing Aircraft

Kissimmee, FL November 16, 2016 --Lead’Air Inc. has developed a new, extremely compact five camera MIDAS (Multi-image Digital Acquisition System) capable of mounting on the nose of a Bell 206B or AS350 Eurocopter with the use of the FAA approved Meeker mounts.

With just a few bolts the unit can also be disconnected from the helicopter mount and connected to our simplified table design for fixed wing aircraft. The simple design characteristics make the change fast and efficient.

The need for flexibility in the design of our MIDAS has become more apparent as the world of 3D oblique imagery becomes more prevalent in the GIS, design and engineering fields.


Moving the HELIDAS from a helicopter to a fixed wing aircraft is a unique feature providing opportunities to fly projects that may be restricted by Air Traffic Control.

By design, helicopters are intended to fly low and slow and when necessary be able to hover and stop while holding their position in the air. These unique skills make helicopters very popular with Air Traffic Control (ATC). Contrary to fixed wing airplanes which have to maintain high forward speed to stay airborne, helicopters can do almost anything the Controller asks, such as "hold present position" in mid-air.  In congested airspace where traffic remains intense, one can fly a helicopter safely while staying out of the way of other aircraft.

Air Traffic Controllers know that a helicopter pilot can do just about any maneuver necessary to prevent a collision or in-air near misses. This ability is why the helicopter is a platform of choice to fly in congested, controlled airspace. A fix wing aircraft might wait days or even weeks to get clearances to fly in controlled airspace where a helicopter will almost certainly get a clearance immediately. Lead'Air created the Helidas to take advantage of the great freedom that helicopters enjoy around airports around the world. 

However, helicopters are very expensive to fly; this is why once the difficult area is captured by helicopter, the Helidas can be easily installed into a less expensive fixed-wing aircraft to complete the remainder of the project. The Helidas, with its ability to be flown at 1000 feet allows the fix wing aircraft to fly under the controlled airspace and promptly complete the mission. Flying at lower altitudes with the helicopter for smaller sites at higher resolution, or at higher altitudes for larger block size projects with the fixed wing aircraft makes the HELIDAS ideal for multiple project types.

Capturing Imagery with options of five Canon 5DS R 50 mp cameras, 5 Phase One IXU R 1000 or a combination of one Phase One IXU 1000 for the Nadir camera and four Canon 5DS R cameras for the obliques allows for multiple solutions for the customer.

The inclusion of an Applanix AP 40 IMU provides precise positional data for real-time navigation and post processing for image orientation.

The fully stabilized STX type mount provides complete stabilization of your imagery during capture making this a truly multipurpose package. 

About Lead’Air, Inc.

Lead’Air has specialized in and has continually developed efficiency tools for the aerial survey profession for over 20 years including the Track’AirTM X-Track sensor control software and hardware, the development, and manufacturing of MIDAS multi-camera digital acquisition systems for 3D modeling, and large and small format IMU stabilized mounts for many types of sensors. The company provides general and custom solutions for a worldwide consumer base.

Read more about Lead’Air’s Products at http://trackair.com/index.php/product/ or contact Email Contact


Read the complete story ...

Review Article Be the first to review this article


Featured Video
GIS Specialist for Metro Wastewater Reclamation District at Denver, Colorado
Upcoming Events
SUE Association at Capitol Skyline Hotel 10 “I” Eye Street, SW Washington, DC - Jul 26, 2018
2018 ENVI Analytics Symposium at The Brown Palace Hotel & Spa Denver CO - Aug 21 - 23, 2018
2018 South Florida GIS Expo at 650 Okeechobee Blvd West Palm Beach FL - Aug 23 - 24, 2018
SPTechCon 2018 at Sheraton Boston Hotel Boston MA - Aug 26 - 29, 2018
Canon: oce crystalPoint
Teledyne Optech
Bentley: -YII 2018 Awards
Interdrone 2018

Internet Business Systems © 2018 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation TechJobsCafe - Technical Jobs and Resumes  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise