Sandwork Debuts SpiceCheck Design Checker at DATE 2007

Latest functionality for AVAD suite of tools detects critical design issues

MOUNTAIN VIEW, Calif., April 2, 2007 -- SpiceCheck, the latest tool in Sandwork's analysis verification and debugging (AVAD) suite for analog and mixed-signal designers, performs transistor-level design rule screening from static connectivity to post-layout signal integrity issues and allows integrated circuits (ICs) and systems on chip (SoCs) designers to perform comprehensive checks on traditionally difficult-to-find design problems. At Design Automation and Test in Europe (DATE) 2007, Sandwork will demonstrate SpiceCheck's latest functionalities, including support for Mentor Graphics' Eldo™ and Cadence Spectre™ netlist formats.

SpiceCheck is the only fully Tcl programmable netlist-driven static rule checker that is also capable of dynamic waveform probing. Today's low-power chips commonly involve multiple power domains that present tremendous verification challenges for designers who must adhere to complex design specifications. SpiceCheck helps designers to ensure that electrostatic discharge (ESD) protection is properly installed; that low-voltage devices are not present in high-voltage rails; that no leakage devices appear at multi-rail interface blocks; and, at the physical level, that no signal integrity problem remains as a result of high parasitic resistance and capacitance.

"Sandwork now has reached 25 European customers," said Jack Yao, president of Sandwork. "It was the feedback from these European accounts that prompted us to focus in the design check area and to continue enhancing the product to meet the growing challenges in the mixed-signal design community."

For additional information, or a demonstration, please visit Sandwork in Booth R46 at the DATE conference in Nice, France, from April 17th to 19th, 2007.

About Sandwork Design
Sandwork Design, Inc. develops vendor-neutral analog and mixed-signal analysis, verification and debugging (AVAD) solutions, including transistor-level debugging and waveform analysis software for complex mixed-signal semiconductors and systems on a chip (SoCs). All products work with all industry-standard analog simulators and simulation environments. Sandwork's products allow customers to shorten design cycles and improve chip performance.

Headquartered in Mountain View, Calif., Sandwork is privately held and has been profitable since 2001. Further information is available at the company's website at www.sandwork.com.

WaveView Analyzer is a trademark of Sandwork Design, Inc. All other brand and product names appearing in this document are registered trademarks or trademarks of their respective holders.

# # #


Contacts:

Sandwork Design
Wu-Yi Chin, 650-988-9934, wuyi@sandwork.com

Cayenne Communication - PR for Sandwork
Linda Marchant, 919-451-0776, Email Contact



Review Article Be the first to review this article

Harris

Featured Video
Jobs
GIS Engineer III for Nebraska State Government at Lincoln|, Nebraska
Vice President, GIS Business Unit for RAMTeCH Software Solutions, Inc. at Stillwater, Minnesota
GIS ANALYST for Cobb County Government at Marietta, California
Senior Account Manager, Utilities for RAMTeCH Software Solutions, Inc. at Stillwater, Minnesota
BIM / REVIT Senior Structural Modeler for McNamara Salvia at New York, California
Upcoming Events
Esri Malaysia User Conference 2018 at Kuala Lumpur Convention Centre Kuala Lumpur Malaysia - Oct 25, 2018
Milipol Qatar 2018 at Doha Qatar - Oct 29 - 31, 2018
GeoAlberta 2018 at The Westin Downtown Edmonton Edmonton Canada - Oct 29 - 31, 2018
GEO Week 2018 at Kyoto International Conference Center (ICC Kyoto) Kyoto Japan - Oct 29 - 2, 2018
Teledyne Optech
Teledyne:



Internet Business Systems © 2018 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation TechJobsCafe - Technical Jobs and Resumes  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise