Carbon Design Systems to Exhibit at TI Developer Conference 2008 February 26-27

ACTON, Mass.—(BUSINESS WIRE)—February 25, 2008— Carbon Design Systems(TM) will participate at the Texas Instruments Developer Conference 2008 February 26-28 at the Hilton Anatole in Dallas, offering continuous demonstrations of Carbon Model Studio in Booth #131.

Carbon Model Studio is a solution for the automatic generation, validation and implementation of hardware-accurate software models, enabling early software development and debug before silicon. It can be used by the entire design team, from system architects and software engineers to hardware designers and third-party intellectual property (IP) providers.

To learn more about Carbon and Carbon Model Studio, go to: www.carbondesignsystems.com.

About Carbon Design Systems

Carbon is the leading supplier of system-level tools to automatically create, validate and deploy software models generated from Verilog and/or VHDL descriptions. Carbon's models are used in conjunction with SystemC simulation platforms to enable architecture profiling and software validation in parallel with hardware development. Problems can be found and resolved early in the design cycle, rather than waiting for prototypes to be built or silicon to be delivered. Its solutions are based on open industry standards, including SystemC, SCML, Verilog, VHDL, OSCI TLM, MDI, CASI, CADI and CAPI. Carbon's customers are systems, semiconductor, and IP companies that focus on communications, networking, and consumer electronics. Carbon is headquartered at 125 Nagog Park, Acton, Mass., 01720. Telephone: (781) 264-7300. Facsimile: (781) 264-9990. Email: info@carbondesignsystems.com. Web site: www.carbondesignsystems.com.

Carbon Design Systems is a trademark of Carbon Design Systems Inc. Carbon acknowledges trademarks or registered trademarks of other organizations for their respective products and services.

Contact:

Public Relations for Carbon Design Systems
Nanette Collins, 617-437-1822
Email Contact




Review Article Be the first to review this article

Harris

Jobs
Software Developer for CHA Consulting, Inc. at Norwell, Massachusetts
Geospatial Analyst/Programmer for LANDIQ at Sacramento, California
Product Manager for CHA Consulting, Inc. at Boston, Massachusetts
BIM Manager for Eagle Point Software Corporation at Dubuque, Iowa
Mid-Level Mechanical Engineer for Kiewit at lenexa, Kansas
System Designer/Engineer for Bluewater at Southfield, Michigan
Upcoming Events
DroneCon 2018 at MIDRAND, JHB South Africa - May 16 - 18, 2018
GEO Business 2018 at 52 Upper Street London United Kingdom - May 22 - 23, 2018
Upper Midwest Geospatial Conference (UMGEOCON) at 521 East Ave North La Crosse WI - May 23 - 24, 2018
2nd WY UAV Symposium at UW Convention Center 2229 Grand Ave LARAMIE WY - May 30 - 31, 2018
GENEQ
Canon: oce crystalPoint
Teledyne Optech
Teledyne:
Interdrone 2018



Internet Business Systems © 2018 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation TechJobsCafe - Technical Jobs and Resumes  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise