New Fujitsu Integrated Flexible WiMAX SoC Supports Femto Base Stations, and Can Scale to Pico and Micro Base Station Architectures

CHICAGO, Oct. 1 /PRNewswire/ -- Fujitsu Microelectronics America, Inc. (FMA), a global leader in WiMAX-compliant broadband wireless technology, today announced a new Fujitsu mobile WiMAX base station SoC, a highly integrated, flexible device built using the leading-edge Fujitsu 65nm process technology.

Designed to meet the cost requirements of a femto base station architecture, the scalable WiMAX SoC can support pico and micro base station architectures, enabling system manufacturers to implement a single solution across multiple, small base-station platforms.

The new SoC incorporates all the PHY and MAC features along with the analog and digital radio control, and analog circuits required for base station products to pass Mobile WiMAX Wave 2 certification requirements. An on-chip processing unit delivers the power needed to handle all functions of a femto base station. For larger base station applications, an additional processor can be connected by means of a PCI host interface to handle larger demands for more throughput and a bigger user base.

The SoC also provides a full range of commonly used interfaces. The power requirements are approximately 2W, typically enabling a full femto base station to operate on less than 10W.

"There is growing demand for small base-station platforms that have significantly lower capital and operating costs compared with macro base stations," said George Wu, director of the Fujitsu Wireless Solutions Business Group. "The use of many smaller base stations can provide coverage and increase capacity, while reducing user churn because of disappointing performance. Our new mobile WiMAX base station SoC is designed with the flexibility to meet those requirements, with all the features and performance to assure system certification."

"The femtocell value proposition is fairly straightforward: all the benefits of WiFi-based FMC without the need to force users into choosing from a limited supply of dual-mode devices," said Peter Jarich, research director with Current Analysis. "From a commercial perspective, however, the promise of low-cost home base stations that end-users and operators can afford has transformed the WiMAX femtocell from an abstract concept into a business model that operators are actively investigating and planning for."

The Fujitsu femto solution supports up to 10 users with seven simultaneous flows, each with enhanced support for self-organizing networks and on-chip IPSec support for non-secure, back-haul traffic applications. The new SoC can be designed into femto base stations for indoor applications; into pico stations for indoor or outdoor applications by service providers or enterprise networks; and into micro base stations for outdoor use by service providers.

To help meet the cost target anticipated for consumer-grade femto devices, Fujitsu has developed a femto base station reference design kit that includes all required software and hardware for ODMs or contract manufacturers to build a cost-effective system solution.

The new SoC continues Fujitsu's leadership in WiMAX technology, which began in April 2005 with the release of the MB87M3400, a highly integrated WiMAX system-on-chip that complies with the 802.16-2004 standard.

About Fujitsu Microelectronics America, Inc.

Fujitsu Microelectronics America, Inc. (FMA) leads the industry in innovation. FMA provides high-quality, reliable semiconductor products and services for the wireless, networking, consumer, automotive, and other markets throughout North and South America. As a founding member and current board member of the WiMAX Forum(TM), Fujitsu supports the standards development and compliance programs that are essential to successful Broadband Wireless deployment. Fujitsu provides performance-driven WiMAX solutions by leveraging the company's experience and expertise in the networking and communications markets. Fujitsu offers flexible WiMAX SoC and reference designs for WiMAX-certifiable systems to equipment vendors. For more product information, please visit the company's web site at http://us.fujitsu.com/micro/WiMAX, or address e-mail to Email Contact.

All company and other product names mentioned may be trademarks or registered trademarks of their respective owners.

Web site: http://www.fma.fujitsu.com/
http://us.fujitsu.com/micro/WiMAX/




Review Article Be the first to review this article
Trimble

Harris

Featured Video
Jobs
Geospatial Systems Administrator for BAE Systems Intelligence & Security at arnold, MO
Geospatial Analyst - Senior for BAE Systems Intelligence & Security at Springfield, VA
Senior Mechanical Engineer for BAE Systems Intelligence & Security at Arlington, VA
Sr Mechanical Design Engineer for Medtronic at mounds view, MN
Mechanical Design Engineer 3 for KLA-Tencor at Milpitas, CA
Urban Designer - Urban Design/Planning for SERA Architects, Inc at Portland, OR
Upcoming Events
Geospatial World Forum 2018 at Hyderabad International Convention Centre Hyderabad India - Jan 16 - 19, 2018
2018 Annual Convention of Virginia Association of Surveyors at 24 S. Market St Staunton VA - Jan 18 - 20, 2018
ArcGIS: Introduction at Environmental and Natural Resource Building 14 College Farm Rd New Brunswick NJ - Feb 1 - 22, 2018
International LiDAR Mapping Forum at Hyatt Regency 650 15th Street, Denver CO - Feb 5 - 7, 2018
Teledyne Optech
University of Denver GIS Masters Degree Online
Teledyne:
CADalog.com - Countless CAD add-ons, plug-ins and more.



Internet Business Systems © 2017 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation TechJobsCafe - Technical Jobs and Resumes  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise