ESPRIT 2009 by DP Technology at Medical Device Puerto Rico 2009 San Juan, Puerto Rico, Jan. 29-30

Camarillo, Calif. — Jan. 20, 2009 — DP Technology’s ESPRIT® 2009 computer-aided manufacturing (CAM) software will be exhibited at Medical Device Puerto Rico 2009, scheduled to take place Jan. 29-30 at the Puerto Rico Convention Center, in San Juan, Puerto Rico.

Considered a reliable source of “education, innovation, and collaborative opportunities in the field of high-tech precision medical device manufacturing,” Medical Device Puerto Rico 2009 is likewise a networking outlet for those involved in the design, manufacturing and packaging of medical devices and instruments.

ESPRIT 2009 will be exhibited at booth No. 224, where there will be opportunities for one-on-one demonstrations and presentations of the new features available within the latest generation of the product, which includes a significant number of new, innovative technologies in the areas of 3- and 5-axis milling, feature recognition and user interface, in addition to a long list of productivity-enhancing features for milling, turning and wire EDM part programming. ESPRIT 2009 is designed to run on both the Microsoft Windows XP and Microsoft Vista operating systems.

ESPRIT 2009 places a heavy emphasis on integrated machining, the use of milling and, or turning in any combination on any type of machine tool — Swiss-turn, mill-turn, B-axis machines, etc. Therefore, as with the 3- and 5-axis improvement listed above, most improvements to the software are to the benefit of all programmers.

Other new or upgraded features highlighted in the 2009 release include improvement to the following machining cycles: facing, open-pocket machining, slot milling, chamfer milling and thread milling.

Upgrades on display at Medical Device Puerto Rico and available within ESPRIT 2009 reduce the time required to produce part programs while increasing the quality of those programs and helping to reduce machining cycle times.


ESPRIT is a high-performance computer-aided manufacturing (CAM) system for a full range of machine tool applications. ESPRIT delivers powerful full-spectrum programming for 2–5 axis milling, 2–22 axis turning, 2–5 axis wire EDM, multitasking mill-turn machining and B-axis machine tools, and high-speed 3- and 5-axis machining.

ESPRIT’s high-performance capabilities include machining any part geometry (solid, surface, or wireframe), universal post processing to format G-code for virtually any machine tool, and solid simulation and verification with dry runs rendered in dynamic solids for optimal part quality and consistency. ESPRIT is 100 percent pure Windows®, and provides a comfortable and familiar user interface for maximum productivity.

About DP Technology Corp.

DP Technology is a computer-aided manufacturing (CAM) software market leader with a mission to provide CNC programmers with the most powerful CAM software ever. DP Technology’s flagship product, ESPRIT, captures the company’s vision of technology’s potential and its passion for excellence.

DP Technology maintains its worldwide headquarters in Camarillo, Calif., and product development teams in California and Florence, Italy. Sales and support operations are located in Europe, Asia, and North and South America. For additional information about DP Technology and ESPRIT, call +1-805-388-6000, send an e-mail to Email Contact, or visit the company Web site at

Stacey Wiebe
Public Relations Coordinator
DP Technology
(805) 388-6000
Email Contact

Chuck Mathews
Vice President
DP Technology
(805) 388-6000
Email Contact

Review Article Be the first to review this article
Featured Video
GIS - Systems Analyst for City of Olathe at Olathe, Kansas
SENIOR GIS GAS SPECIALIST for James W. Sewall Company at , Any State in the USA
Geospatial Analyst/Programmer for LANDIQ at Sacramento, California
Director of Process Engineering. for Tekni-Plex at Toledo, Ohio
Senior Structural Engineer for Wiss,Janney, Estner Assoicates, Inc at houston, Texas
Mechanical Engineer for Allen & Shariff Corporation at Pittsburgh, Pennsylvania
Upcoming Events
FME World Tour 2018 at Munich Germany - Apr 17, 2018
FME World Tour 2018 at Berlin Germany - Apr 18, 2018
GEOINT 2018 Symposium at 333 S Franklin St Tampa FL - Apr 22 - 25, 2018
FME World Tour 2018 at Frankfurt Germany - Apr 24, 2018
Canon: oce crystalPoint
Teledyne Optech
GEOINT2018 - Countless CAD add-ons, plug-ins and more.

Internet Business Systems © 2018 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation TechJobsCafe - Technical Jobs and Resumes  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise