LogicVision Extends Built-In Self-Test Products to be Directly Controllable From Embedded CPU Cores, Easing System Test and Maintenance

SAN JOSE, Calif., Feb. 26 /PRNewswire-FirstCall/ -- LogicVision, Inc. (NASDAQ: LGVN), a leading provider of semiconductor built-in-self-test (BIST) and diagnostic solutions, today announced that it has developed new technology that will enable easy access to chip level BIST capabilities for board and system-level test and maintenance activities. All of the advanced test and diagnostic functions used during device manufacturing test can now be made available to virtually any embedded CPU core or controlled from any external CPU bus such as I2C, allowing these embedded capabilities to be leveraged by system maintenance functions.

LogicVision's solutions provide high quality device test and diagnostic capabilities by integrating customized BIST controllers throughout the chip. Increasingly, these embedded capabilities originally used during semiconductor manufacturing test are being sought by system integrators to aid in product test and maintenance activities. Within a system, embedded resources are typically accessed through one or more embedded CPU cores connected to system-wide buses. In order to integrate into this existing infrastructure, LogicVision is introducing new CPU interface IP and supporting automation that enables any embedded CPU core to communicate with all of the BIST capabilities through any internal system bus. Necessary BIST configuration and protocol data are automatically converted to CPU specific read/write commands that can be directly stored into any CPU-accessible flash memory.

"Ensuring that a car's electronics are functioning properly when the engine is turned on, or being able to accurately identify which component is causing a computer to fail are examples of the significant value of incorporating system test and diagnostic functions in today's electronic systems," said Stephen Pateras, Vice-President of Marketing at LogicVision. "Making our BIST capabilities accessible at the system level provides a key component to fully achieving these capabilities."

The CPU interface support is immediately available as an option to any of the ETCreate(TM) family of products.

About LogicVision Inc.

LogicVision (NASDAQ: LGVN) provides a comprehensive set of proprietary built-in-self-test (BIST) technologies for achieving the highest quality silicon manufacturing test while reducing test costs for complex System-on-Chip devices. LogicVision's Dragonfly Test Platform(TM) enables integrated circuit designers to embed BIST functionality into a semiconductor design. This functionality is used during semiconductor production test and throughout the useful life of the chip. The complete Dragonfly Test Platform, including the ETCreate(TM), Silicon Insight(TM) and Yield Insight(TM) product families, improves profit margins by reducing device field returns and test costs, accelerating silicon bring-up times and shortening both time-to-market and time-to-yield. For more information on the company and its products, please visit the LogicVision website at www.logicvision.com.

FORWARD LOOKING STATEMENTS

Except for the historical information contained herein, the matters set forth in this press release, including statements as to the Company's outlook, interest for the Company's products, and successes in adoption of the Company's solutions, are forward-looking statements within the meaning of the Private Securities Litigation Reform Act of 1995. These forward-looking statements are subject to risks and uncertainties that could cause actual results to differ materially, including, but not limited to, the possibility that orders could be modified or cancelled, existing customer orders may not be renewed, the ability of the Company to negotiate and sign customer agreements and obtain purchase orders, trends in capital spending in the semiconductor industry, the timing and nature of customer orders, whether customers accept the Company's new and existing products, the impact of competitive products and alternative technological advances, and other risks detailed in LogicVision's Annual Report on Form 10-K for the year ended December 31, 2007, LogicVision's Quarterly Report on Form 10-Q for the quarter ended September 30, 2008 and from time to time in LogicVision's SEC reports. These forward-looking statements speak only as of the date hereof. LogicVision disclaims any obligation to update these forward-looking statements.

Web site: http://www.logicvision.com/




Review Article Be the first to review this article

Harris

Featured Video
Jobs
Product Manager for CHA Consulting, Inc. at Boston, Massachusetts
Geospatial Analyst/Programmer for LANDIQ at Sacramento, California
Software Developer for CHA Consulting, Inc. at Norwell, Massachusetts
GIS Data Analyst for CostQuest Associates, Inc. at Cincinnati, Ohio
Mechanical Engineer for Allen & Shariff Corporation at Pittsburgh, Pennsylvania
Mid-Level Mechanical Engineer for Kiewit at lenexa, Kansas
Upcoming Events
Upper Midwest Geospatial Conference (UMGEOCON) at 521 East Ave North La Crosse WI - May 23 - 24, 2018
Locate 2018 at Pier 27, The Embarcadero San Francisco CA - May 30 - 31, 2018
2nd WY UAV Symposium at UW Convention Center 2229 Grand Ave LARAMIE WY - May 30 - 31, 2018
GeoIntelligence Asia at NEW DELHI India - Jun 4 - 5, 2018
Teledyne Optech
Bentley: -YII 2018 Awards



Internet Business Systems © 2018 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation TechJobsCafe - Technical Jobs and Resumes  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise