Satellite Imaging Corporation using GeoEye-1 Satellite Sensor to acquire Stereo Imagery at 0.5m Resolution for Production of 2m Digital Elevation Models (DEMs)

March 17, 2009 — With the successful launch of GeoEye-1 satellite sensor from Vandenberg Air Force Base in California on September 6, 2008 at 11:50:57 Hrs (PST), successful completion of testing and calibration GeoEye released the satellite for commercial orders on February 5, 2009.

Since February 5, 2009, Satellite Imaging Corporation (SIC) received orders from various customers to acquire new  GeoEye-1 mono and stereo satellite imagery with image resolution of 0.5 meter supporting county tax mapping, engineering/ construction, mining, land development and natural resources management.

Satellite imagery is used for many GIS and CAD applications requiring detailed up-to-date image data for planning purposes and change detection. For three-dimensional (3D) applications, Digital Elevation Models (DEMs), and contours can be delivered through high cost aircraft based LiDAR surveys. But with constricted budgets, elevation data is sometimes obtained from old and unreliable data sources with 10 meter or 30 meter postings. For international project planning, many exploration and engineering companies are limited to 30m ASTER DEM data sets or Shuttle Radar Topography Mission (SRTM) 90 meter DEM data to have access to digital terrain models. When local topographic maps are available at a suitable scale, elevation contours are sometimes extracted from the topographic maps.

The GeoEye-1 and IKONOS satellite sensors provide the best solution for organizations and companies requiring cost-effective high-resolution image data and Digital Terrain Models (DTMs).

“With the increased geo-location position accuracy of the GeoEye-1 satellite sensor the number of required GPS derived Ground Control Points (GCP’s) can be drastically reduced, thereby reducing operational cost and security risks in foreign countries, making the GeoEye-1 satellite sensor a platform of choice to acquire 0.5 meter high-resolution imagery and DEM products.” said Leopold Romeijn, President of Satellite Imaging Corporation.

Covering large areas a horizontal position accuracy of <1 meter can be obtained with just one or two GCP’s, and without any GCP’s, geo-location accuracies of <5 meter can be achieved depending on terrain conditions and collection geometry during the time of image data collection.

GIS and CAD professionals are now able to work with satellite imagery at 0.5 meter resolution, 2 meter digital raster DEMs, 1 meter elevation contours and TIN models, thereby facilitating a 3D computer work environments, supporting the planning and construction of roads, facilities, pipelines and many other project applications.


Rating:
Reviews:
Review Article
  • Where's the news? March 18, 2009
    Reviewed by 'seattle gis'
    When I read the news section of the GISCafe Newletter I expect to see real news not advertising.

      One person found this review helpful.

      Was this review helpful to you?   (Report this review as inappropriate)


For more discussions, follow this link …
Teledyne Optech:

Harris

Featured Video
Jobs
Geospatial Systems Administrator for BAE Systems Intelligence & Security at arnold, MO
Geospatial Analyst - Senior for BAE Systems Intelligence & Security at Springfield, VA
Urban Designer - Urban Design/Planning for SERA Architects, Inc at Portland, OR
Upcoming Events
Geospatial World Forum 2018 at Hyderabad International Convention Centre Hyderabad India - Jan 16 - 19, 2018
2018 Annual Convention of Virginia Association of Surveyors at 24 S. Market St Staunton VA - Jan 18 - 20, 2018
ArcGIS: Introduction at Environmental and Natural Resource Building 14 College Farm Rd New Brunswick NJ - Feb 1 - 22, 2018
International LiDAR Mapping Forum at Hyatt Regency 650 15th Street, Denver CO - Feb 5 - 7, 2018
Teledyne Optech
University of Denver GIS Masters Degree Online
CADalog.com - Countless CAD add-ons, plug-ins and more.



Internet Business Systems © 2017 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation TechJobsCafe - Technical Jobs and Resumes  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise