Intermap Technologies and Visteon Corporation Complete Successful Joint Development of Automotive Predictive Adaptive Front-lighting System

DENVER & KERPEN, Germany — (BUSINESS WIRE) — July 15, 2009 — Intermap Technologies, a leading global 3D mapping company, today announced completion of the initial stage of a joint development agreement with Visteon Corp., an internationally recognized automotive technology developer and supplier. The focus of the agreement is to develop a predictive adaptive front-lighting system (Predictive AFS) for passenger vehicles. The advanced driver assistance system (ADAS), which automatically turns a vehicle’s headlights into an upcoming bend in the road, has been successfully road tested in Germany.

As part of the agreement, Intermap provided Visteon with the Company’s NEXTMap® 3D road geometry data for a specified test area in Germany. The Predictive AFS uses a small map extract of the road ahead of the current vehicle position known as ADAS Horizon (AH). Intermap developed a module that prepares the AH data and streams the data to the vehicle bus. For presentation and test purposes, Intermap developed a NEXTMap 3D Horizon, that virtually extends the driver’s knowledge of the road ahead by visualizing the AH data sent to the vehicle’s CAN bus in the ADASIS protocol format.

Dr. Markus Klein, senior manager of exterior lighting for Visteon said, “With this real-life testing, we again received confirmation of Intermap´s high-quality NEXTMap 3D road geometry product. Moreover, it has been very impressive to find their predictive adaptive lighting application, the critical map-matching component within NEXTMap 3D Horizon, working so well. Furthermore, the insight gained thus far from this joint ADAS project places Visteon in an even more innovative and leading position in the external lighting market.”

“Our joint development effort with Visteon has been very rewarding,” stated Eric DesRoche, senior vice president of automotive for Intermap Technologies. “Visteon has long been recognized for its forward-looking expertise in the automotive sector. This expertise, combined with our highly accurate 3D geometric data, has created a proven predictive adaptive front-lighting system that allows manufacturers of passenger vehicles to provide drivers and passengers with a high degree of personal safety.”

About Intermap Technologies

Intermap (TSX: IMP.TO)(AIM: IMAP.L) is a preeminent digital mapping company creating uniform high-resolution 3D digital models of the earth’s surface. The Company is proactively remapping entire countries and building uniform national databases, called NEXTMap®, consisting of affordably priced elevation data and geometric images of unprecedented accuracy. Demand for NEXTMap data is growing as new commercial applications emerge within the GIS, engineering, automotive, GPS maps, insurance risk assessment, oil and gas, hydrology, environmental planning, wireless communications, transportation, aviation, and 3D visualization markets.

Headquartered in Denver, Colorado, Intermap employs more than 850 people worldwide, with additional offices in Calgary, Detroit, Jakarta, London, Munich, Ottawa, Paris, Prague, and Washington D.C. For more information, visit

NEXTMap® is a registered trademark of Intermap Technologies Corporation

About Visteon Corporation

Visteon Corporation is a leading global automotive supplier that designs, engineers and manufactures innovative climate, interior, electronic and lighting products for vehicle manufacturers, and also provides a range of products and services to aftermarket customers. With corporate offices in Van Buren Township, Mich. (U.S.); Shanghai, China; and Chelmsford, UK; the company has facilities in 27 countries and employs approximately 31,000 people.

Intermap Reader Advisory

Certain information provided in this news release constitutes forward-looking statements. The words "anticipate", "expect", "project", "estimate", "forecast" and similar expressions are intended to identify such forward-looking statements. Although Intermap believes that these statements are based on information and assumptions which are current, reasonable and complete, these statements are necessarily subject to a variety of known and unknown risks and uncertainties. You can find a discussion of such risks and uncertainties in our Annual Information Form and other securities filings. While the Company makes these forward-looking statements in good faith, should one or more of these risks or uncertainties materialize, or should underlying assumptions prove incorrect, actual results may vary significantly from those expected. Accordingly, no assurances can be given that any of the events anticipated by the forward-looking statements will transpire or occur, or if any of them do so, what benefits that the Company will derive therefrom. All subsequent forward-looking statements, whether written or oral, attributable to Intermap or persons acting on its behalf are expressly qualified in their entirety by these cautionary statements. The forward-looking statements contained in this news release are made as at the date of this news release and the Company does not undertake any obligation to update publicly or to revise any of the forward-looking statements made herein, whether as a result of new information, future events or otherwise, except as may be required by applicable securities law.


Intermap Technologies
Kevin Thomas, +1 303-708-0955
Vice President, Marketing
Email Contact
Visteon Corporation
Tracy Stallings, 313-418-8409
Corporate Communications
Email Contact

Review Article Be the first to review this article
Teledyne Optech:

Featured Video
Currently No Featured Jobs
Upcoming Events
Commercial UAV Expo 2016 at MGM Grand Hotel Conference Center Las Vegas NV - Oct 31 - 2, 2016
GIS-Pro 2016: URISA's 54th Annual Conference at Toronto Canada - Oct 31 - 3, 2016
24th ACM SIGSPATIAL International Conference at San Francisco Bay Area, California, USA San Francisco - Oct 31 - 3, 2016
Teledyne: - Countless CAD add-ons, plug-ins and more.

Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation TechJobsCafe - Technical Jobs and Resumes  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy