Lanny L. Lewyn, Tanner EDA Technical Advisor, Presents on Nanoscale Analog CMOS Design and Shortening Physical Design Time to Market at IEEE NORCHIP Event

November 15 & 16 2009, Trondheim, Norway

Who:

Lanny L. Lewyn, Technical Advisor to Tanner EDA, the world leader in PC-based analog, mixed-signal (A/MS) and MEMS circuit design software, is giving a pre-conference tutorial and invited paper on Physical Design and Reliability Issues in Nanoscale Analog CMOS Technologies at the IEEE Nordic Microelectronics or NORCHIP event.

Dr. Lewyn is president of Lewyn Consulting Inc. (Laguna Beach, CA) and is a Life Senior Member of the IEEE. He holds 29 U.S. patents in CMOS and bipolar circuits, and B.S. Eng. and M.S.E.E. degrees from the California Institute of Technology, and a Ph.D. E.E. from Stanford University.

 

What:

Title

Physical Design and Reliability Issues in Nanoscale Analog CMOS Technologies

Abstract

Physical design deficiencies found after post-layout-extraction result in re-layout and a waste of the industry’s most valuable commodity: time to market. This tutorial presents an overview of these effects on nanoscale analog circuit design and explores how to mitigate them.

 

When

Tutorial

13.00-17.00, Sunday, 15 November 2009

Invited Talk

09.15-10.00, Monday, 16 November 2009

 

Where

Rica Nidelven Hotel

Havnegata 1

NO-7400 Trondheim

Norway

 

More Information:

For more information about Tanner EDA, please visit www.tannereda.com

For more information about Norchip, please visit www.norchip.org.

 

About Tanner EDA Software

HiPer Silicon™ is Tanner EDA’s hallmark software suite for the design, layout and verification of A/MS, RF and MEMS ICs. It includes core functionality for schematic capture, analog circuit simulation and physical layout as well as advanced features that improve designer productivity; including the HiPer Verify™ foundry-compatible physical verification engine, Verilog-A simulation, an interactive autorouter and device layout automation. The entire Tanner EDA product line is available on Windows and Linux platforms.

 

About Tanner EDA

Tanner EDA is a leading provider of PC-based electronic design automation (EDA) software solutions for the design, layout and verification of analog and mixed-signal ICs and MEMS. Its solutions promote innovation by speeding designs from concept to silicon. Tanner EDA software is used by thousands of companies in markets ranging from consumer electronics, biomedical, wireless, imaging, power management, RF and photovoltaics. Founded in 1988, Tanner EDA has shipped over 25,000 licenses of its PC-based electronic design software to more than 4,000 customers in 67 countries. For more information on Tanner EDA products, visit www.tannereda.com.

-end-

Press Contact:

Georgia Marszalek, ValleyPR for Tanner EDA, +1 650 345 7477, Email Contact Twitter: @ValleyPR




Review Article Be the first to review this article

Air bus

Featured Video
Jobs
Mechanical Engineer I for Air Techniques, Inc at Melville, NY
Proposal Support Coordinator for Keystone Aerial Surveys at Philadelphia, PA
Upcoming Events
GeoIntelligence Asia Pacific Forum 2017 at Putrajaya International Convention Centre Putrajaya Malaysia - Aug 23, 2017
2017 Utah Drone Summit, Aug 25-26, 2017, Salt Palace Convention Center, Salt Lake City, Utah at Salt Palace Convention Center 100 S W Temple Salt Lake City Utah - Aug 25 - 26, 2017
Esri GeoConX Conference 2017 at Chicago Illinois - Sep 5 - 8, 2017
Canon
Teledyne Optech
University of Denver GIS Masters Degree Online
InterGeo 2017
InterDrone2017
CADalog.com - Countless CAD add-ons, plug-ins and more.



Internet Business Systems © 2017 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation TechJobsCafe - Technical Jobs and Resumes  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy