EDA Solutions Announces Tanner EDA Process Design Kit Support for X-FAB’s 0.18 µm Technologies

Fareham, UK – EDA Solutions announces that X-FAB has released two 0.18 µm process design kits (PDK) for Tanner Tools Pro on X-TIC, X-FAB's online technical database.

Tanner Tools Pro is the software suite for the design, layout and verification of analog, mixed-signal (A/MS), RF and MEMS ICs from Tanner EDA, the world leader in PC-based A/MS and MEMS circuit design software.

The release of this new kit extends X-FAB’s PDK support for Tanner tools, adding X-FAB's 0.18 µm processes to the range of technologies currently supported (0.35, 0.6, 0.8 and 1.0 µm).

The new PDK will ensure a reliable and repeatable development flow and faster development cycles for analog and mixed-signal IC and MEMS designers who use Tanner Tools Pro in combination with X-FAB's 0.18 µm processes.

X-FAB's 0.18 µm modular analog/mixed-signal process family is based on the industrial standard one-poly-three-metal process baseline. It has a wide selection of options such as standard or low power, 1.8 V core voltage with either 3.3 V including RF or 5.0 V I/O voltage, high voltage up to 45 V and NVM options are easily combinable through the modular approach.

Tanner EDA solutions enable designers to move from concept to silicon with ease using highly cost-effective tools: Tanner Tools Pro is a software suite for the design, layout and verification of analog, mixed-signal, RF and MEMS ICs.

It includes S-Edit for schematic capture, T-Spice for analog circuit simulation and L-Edit for physical layout. HiPer Silicon builds on the capabilities of Tanner Tools Pro with advanced features that improve designer productivity, including the HiPer Verify foundry-compatible physical verification engine, Verilog-A simulation, an interactive autorouter, and device layout automation. Tanner EDA software is available on the Windows and Linux platforms.

For more information visit www.eda-solutions.com, www.tannereda.com, and www.xfab.com




Review Article Be the first to review this article
Trimble

Harris

Featured Video
Jobs
Geospatial Systems Administrator for BAE Systems Intelligence & Security at arnold, MO
Geospatial Analyst - Senior for BAE Systems Intelligence & Security at Springfield, VA
Mechanical Design Engineer 3 for KLA-Tencor at Milpitas, CA
Urban Designer - Urban Design/Planning for SERA Architects, Inc at Portland, OR
Upcoming Events
Geospatial World Forum 2018 at Hyderabad International Convention Centre Hyderabad India - Jan 16 - 19, 2018
2018 Annual Convention of Virginia Association of Surveyors at 24 S. Market St Staunton VA - Jan 18 - 20, 2018
ArcGIS: Introduction at Environmental and Natural Resource Building 14 College Farm Rd New Brunswick NJ - Feb 1 - 22, 2018
International LiDAR Mapping Forum at Hyatt Regency 650 15th Street, Denver CO - Feb 5 - 7, 2018
Teledyne Optech
University of Denver GIS Masters Degree Online
CADalog.com - Countless CAD add-ons, plug-ins and more.



Internet Business Systems © 2017 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation TechJobsCafe - Technical Jobs and Resumes  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise