New VCE6467 Video Communications Engine integrates Texas Instruments hardware and RADVISION software on a single chip for a variety of two-way HD video communications

Cost-effective, complete hardware + software solution provides 10 times reduction in number of integration man hours, allowing for faster time to market

DALLAS, June 1 — (PRNewswire) — Video communications designers can now benefit from an integrated video communications solution – pre-installed software on a video processor chip, available from a single vendor.  The VCE6467 Video Communications Engine from Texas Instruments Incorporated (TI) (NYSE: TXN) and RADVISION's Technology Business Unit (TBU) is a cost-conscious solution easily enabling a variety of two-way, live HD video communications applications, including video conferencing, telemedicine, digital signage and set-top boxes.  This inclusive solution reduces software integration time by more than 10 times the number of man hours normally required, which significantly speeds time to market.

Based on the DaVinci™ DM6467 video processor from TI, the VCE6467 comes pre-loaded with RADVISION's video communications software and allows HD video at 720p 30 frames per second (fps) using H.264 encoding and decoding for seamless two-way communication with low-latency.  Because the VCE6467 provides HD video, reduced latency and real-time communication, the end video applications allow realistic, nearly face-to-face communications, which eliminates the need for in-person meetings and helps save time and money on unnecessary travel.

VCE6467 key features and benefits:

Key Features


720p 30 fps H.264 video with G.711 audio with audio visual synchronization

Allows live, two-way video communications with low latency

Optional multi-protocol support (SIP, H.323)

Ability to communicate and interoperable with both SIP and H.323 devices

Media quality framework (SVC, bandwidth management, packet loss resilience)

Enables the ability to deploy product over any network, including public internet

Optional fully interoperable with all major video conferencing systems

Communicates with any video communication device available on the market

Software and support

Helping make development easier, the VCE6467 will be accompanied by documentation, software examples, training and support for customization and integration.  

Pricing and availability:

Customers can begin designing by downloading the VCE6467 trial software for use on the DM6467T EVM, available for $1,995 USD.  The VCE6467 will be widely available in 3Q 2010


About Texas Instruments

Texas Instruments (NYSE: TXN) helps customers solve problems and develop new electronics that make the world smarter, healthier, safer, greener and more fun. A global semiconductor company, TI innovates through design, sales and manufacturing operations in more than 30 countries.  For more information, go to


RADVISION (Nasdaq: RVSN) is the industry's leading provider of market-proven products and technologies for unified visual communications over IP, 3G and IMS networks. With its complete set of standards-based video networking infrastructure and developer toolkits for voice, video, data and wireless communications, RADVISION is driving the unified communications evolution by combining the power of video, voice, data and wireless – for high definition video conferencing systems, innovative converged mobile services, and highly scalable video-enabled desktop platforms on IP, 3G and emerging next-generation IMS networks. To gain additional insights into our products, technology and opinions, visit and For more information about RADVISION, visit

This press release contains forward-looking statements that are subject to risks and uncertainties. Factors that could cause actual results to differ materially from these forward-looking statements include, but are not limited to, general business conditions in the industry, changes in demand for products, the timing and amount or cancellation of orders and other risks detailed from time to time in RADVISION's filings with the Securities Exchange Commission, including RADVISION's Form 20-F Annual Report. These documents contain and identify other important factors that could cause actual results to differ materially from those contained in our projections or forward-looking statements. Stockholders and other readers are cautioned not to place undue reliance on these forward-looking statements, which speak only as of the date on which they are made. We undertake no obligation to update publicly or revise any forward-looking statement.


DaVinci™ is a trademark of Texas Instruments.  All other trademarks and registered trademarks belong to their respective owners.

SOURCE Texas Instruments

Texas Instruments
Christi Davidson of GolinHarris
Phone: +1-972-341-2584
Email Contact
Gem-Ann Reagan of Texas Instruments
Phone: +1-214-567-0795, gem- Email Contact
Adi Sfadia, Chief Financial Officer of RADVISION
Phone: +1-201-689-6340
Email Contact
media relations, Paul Macchia of Dukas Public Relations
Phone: +1-212-704-7385
Email Contact
investor relations, June Filingeri of Comm-Partners LLC
Phone: +1-203-972-0186
Email Contact

Review Article Be the first to review this article

Featured Video
Project Manager for Keystone Aerial Surveys at Philadelphia, PA
GIS Specialist for Fresno Irrigation District at Fresno, CA
Geospatial Analyst/Programmer for LANDIQ at Sacramento, CA
Geospatial Systems Administrator for BAE Systems Intelligence & Security at arnold, MO
Division Engineer for Montana Dept. Of Commerce at Helena, MT
Avionics System Engineer for BAE Systems Intelligence & Security at Arlington, VA
Upcoming Events
USC Spatial Science Summit at 3540 South Figueroa Los Angeles CA - Feb 23, 2018
2018 Los Angeles Geospatial Summit at USC Radisson Hotel 3540 S Figueroa St. Los Angeles CA - Feb 23, 2018
Webinar: What's New in Global Mapper v19.1 at United States - Feb 27, 2018
2018 Esri Developer Summit at Palm Springs Convention Center Palm Springs CA - Mar 6 - 9, 2018
Teledyne Optech
University of Denver GIS Masters Degree Online
GEOINT2018 - Countless CAD add-ons, plug-ins and more.

Internet Business Systems © 2018 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation TechJobsCafe - Technical Jobs and Resumes  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise