ModuleWorks to show latest CAD/CAM components at Euromold

ModuleWorks, the leading supplier of CAD/CAM components for 5-Axis machining and CNC simulation, will show the latest release of its CAM components, version 2010.12 at Euromold in Frankfurt (Hall 11, Stand E102) from 1st-4th December 2010.

ModuleWorks continues to innovate with 5-Axis machining technology and will be showing the new developments including the latest techniques for 5-Axis STL mesh machining.  Recent releases have added significant STL capability extending the reach for 5-Axis machining into new applications.

ModuleWorks will also be showing how their 3-Axis and 5-Axis machining strategies can be combined for Mould and die applications. 3-5 Axis conversion of toolpaths is a common technique where the tool axis on a conventional 3-axis toolpath is titled over to allows short series cutters to be employed, giving reduced cycle times and improved surface finish.

The latest developments in CNC Simulation and toolpath verification will also be on show and these offer faster performance and better quality of the final model, especially with large toolpaths.  Dr David Plater, Technical Director for ModuleWorks, comments “Manufacturers are continuing to look to the CAM vendors to provide fast and accurate simulation and verification. Our CNC simulation and analysis tools can be combined with any CAM system to provide big productivity gains, allowing validation and optimisation to be carried out in a virtual environment.”

About ModuleWorks

ModuleWorks is a leading software component provider for the CAD/CAM industry. ModuleWorks’ expertise in 5-Axis simultaneous machining is recognised throughout the CAM industry and its software components and development services are used in many of the leading CAM vendors in the market today.




Review Article Be the first to review this article

Photosat

Featured Video
Jobs
GIS Software Developer for UDC at Englewood, CO
GIS Analyst for G2 Partners LLC at San Ramon, CA
Structural Engineer for The Planate Management Group LLC at Perry Point, MD
ENVIRONMENTAL GRAPHIC DESIGNER for Blitz at San Francisco, CA
Vice President, Transportation Services for Associated General Contractors of New York State at Albany, NY
Structural Engineer for Albert Kahn and Associates at Detroit, MI
Upcoming Events
GIS-PRO 2017 at Jacksonville FL - Oct 23 - 26, 2017
GEO WEEK 2017 at Washington DC - Oct 23 - 27, 2017
Commercial UAV EXPO Americas at The Westgate Resort Las Vegas NV - Oct 24 - 26, 2017
6th International Colloquium on Scientific and Fundamental Aspects of GNSS / Galileo at Technical University of Valencia Valencia Spain - Oct 25 - 27, 2017
Teledyne Optech
Teledyne:
CADalog.com - Countless CAD add-ons, plug-ins and more.



Internet Business Systems © 2017 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation TechJobsCafe - Technical Jobs and Resumes  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise