Mentor Graphics Delivers First Multimedia Platform for Hardware Emulation of 3D TV Products

WILSONVILLE, Ore. — (BUSINESS WIRE) — March 14, 2011Mentor Graphics Corp. (NASDAQ: MENT), a leader in high-performance system verification solutions, today announced a Multimedia platform to accelerate the verification of 3D TV-based products. This platform enables designers to develop and test their software against multiple 3D TV formats on their systems-on-chip (SoC) before silicon is available. The solution includes a High-Definition Multimedia Interface (HDMI) and employs 3D TV analysis tools early in the development cycle—delivering verification at thousands of times faster than software simulation. The platform consists of the Veloce® family of emulators and the iSolveTM Multimedia product for HTDV and HDMI 3D applications, which provides a cost-effective and efficient solution, delivering a dynamic and accurate verification environment.

3D TV equipment is now widely available from several manufacturers, and 3D content is increasingly important for cinema and home applications. Additionally, over the next few years, the expectation is that 3D equipment will also expand from TV into mobile markets, where smartphones, hand-held game consoles, tablet PCs, notebook PCs and portable media players will become another big factor to drive 3D technology.

With the world’s largest processor vendors, consumer electronics, and PC OEMs supporting these standards, it is critical that there are solutions available to accurately and quickly verify their 3D-based SoC designs.

3D TV Multimedia Verification Platform

The Mentor® 3D TV Multimedia Verification platform is used as an essential part of the strategy for verifying 3D TV chips, where full software applications can be validated against a SoC prior to silicon being available, while analyzing several different 3D formats. Additionally, the platform provides direct visualizations of the 3D pictures and frames, rather than the limited signal-level displays of traditional simulation tools. This delivers a more effective and productive debug environment to develop new and leading-edge 3D TV products, without compromising delivery schedules.

“Mentor has led the way for many years in the accelerated verification of Digital TV designs, now including the first 3D TV emulation solution with our iSolve Multimedia product, which is successfully deployed at world-leading consumer electronics companies,” said Eric Selosse, vice president and general manager, Mentor Emulation Division. “With the addition of 3D, Mentor strengthens its position as the premier vendor for hardware emulation solutions for Digital TV applications.”

The Mentor 3D TV platform supports the latest HDMI and other digital TV standards, and includes state-of-the-art debug and analysis tools for video and audio content, automatic generators for data streaming, and remote access client software to support users in worldwide organizations.

The platform can be used with a traditional In-Circuit Emulation as well as a high-performance Transaction-Based Acceleration mode of operation. The ability to mix and match traditional ICE capabilities with high-performance Transaction-Based Acceleration facilitates the smooth transition from simulation centric use models to In-Circuit Emulation.

Product Availability

The solution is available for deployment at customer sites, effective immediately. For product information on Mentor’s multimedia verification platform, contact your Mentor Graphics sales representative, call 800-547-3000, or visit the website at www.mentor.com/med.

About Mentor Graphics

Mentor Graphics Corporation (NASDAQ: MENT) is a world leader in electronic hardware and software design solutions, providing products, consulting services and award-winning support for the world’s most successful electronic, semiconductor and systems companies. Established in 1981, the company reported revenues over the last 12 months of about $915 million. Corporate headquarters are located at 8005 S.W. Boeckman Road, Wilsonville, Oregon 97070-7777. World Wide Web site: http://www.mentor.com/.

(Mentor Graphics, Mentor and Veloce are registered trademarks and iSolve is a trademark of Mentor Graphics Corporation. All other company or product names are the registered trademarks or trademarks of their respective owners.)



Contact:

Mentor Graphics
Carole Thurman, 503-685-4716
Email Contact
or
Ry Schwark, 503-685-1660
Email Contact




Review Article Be the first to review this article
Trimble

Harris

Jobs
Geospatial Systems Administrator for BAE Systems Intelligence & Security at arnold, MO
Geospatial Analyst - Senior for BAE Systems Intelligence & Security at Springfield, VA
Senior Mechanical Engineer for BAE Systems Intelligence & Security at Arlington, VA
Urban Designer - Urban Design/Planning for SERA Architects, Inc at Portland, OR
Sr Mechanical Design Engineer for Medtronic at mounds view, MN
Mechanical Design Engineer 3 for KLA-Tencor at Milpitas, CA
Upcoming Events
Geospatial World Forum 2018 at Hyderabad International Convention Centre Hyderabad India - Jan 16 - 19, 2018
2018 Annual Convention of Virginia Association of Surveyors at 24 S. Market St Staunton VA - Jan 18 - 20, 2018
ArcGIS: Introduction at Environmental and Natural Resource Building 14 College Farm Rd New Brunswick NJ - Feb 1 - 22, 2018
International LiDAR Mapping Forum at Hyatt Regency 650 15th Street, Denver CO - Feb 5 - 7, 2018
Teledyne Optech
University of Denver GIS Masters Degree Online
CADalog.com - Countless CAD add-ons, plug-ins and more.



Internet Business Systems © 2017 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation TechJobsCafe - Technical Jobs and Resumes  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise