This software can remotely manage any Focus3D laser scanner and run an automatic 3D monitoring session of buildings and infrastructures. 4D INSPECTOR® automatically transfers the scans to a remote PC where automatic deformation check runs and alarm emails can be sent to the site managers.
At MundoGEO it will be possible to see an interactive demo at the Gexcel's booth (n.187).
If required, 4D Inspector® can also control a protective enclosure (ScanArmor®) that can protect the Focus3D from damages.
The 4D Inspector®+ScanArmor® system has won the FARO® Asia Pacific Product Innovation Award 2014. Perfect for real-time monitoring indoor application, 4D Inspector® is having a great success in the market for the easy to use interface and installation procedures.
The remote control of a scanner and the automatic monitoring sessions have never been so easy!
Gexcel Srl has a rich history spanning more than 10 years of proven fully featured lidar and imagery analysis software packages with the JRC 3D Reconstructor®, completely compatible with all terrestrial, mobile and airborne scanners from manufacturers such as Faro, Optech, Riegl, Stonex, Topcon, Trimble and Z+F. Gexcel Srl was established in 2007 from the academic know-how of the University of Brescia and the applied research achievements of the European Joint Research Centre (JRC), located in Ispra (Italy). Gexcel Srl is proud to support all major standard formats such as the ASTM E57 and LAS.
arch. Giorgia Rossi
International Sales Manager | Gexcel Srl
+39 030 65 95 001
Gexcel Sales & Marketing
Tel +39 030 65 95 001
Central Administration | Sales Office
Gexcel Srl c/o CSMT
Via Branze 45, I-25123 Brescia | Italy
Tel +39 030 6595001
Fax +39 030 6595020
Registered Office | R&D Lab
Gexcel Srl c/o Polaris Technology Park
Loc. Piscinamanna, I-09010 Pula (CA) | Italy
Tel +39 070 92432901