4D Inspector® and LineUp® Pro presented in Japan at the FARO 3D User Conference Asia Pacific 2015

5th June, 2015, Tokyo, Japan — Gexcel and SGS Gexcel Japan have just attended the  FARO 3D User Conference Asia Pacific 2015/Japan where they have presented  4D Inspector ® (to remotely control and to run an automatic 3D monitoring project): the solution able to transform the Focus3D in a 3D automatic monitoring system.

Several demos of the powerful new  LineUp ®  Pro target-less registration tool have created large interest and surprise among surveyors and technicians present at the Conference.

JRC 3D Reconstructor - LineUp ® Pro is so easily able to perfectly align tens of scans without any geometry constrain, in a so short elaboration time, using only 20% of scan overlap, that the alignment problems can be considered as solved.

About Gexcel

Gexcel Srl has a rich history spanning more than 10 years of proven fully featured lidar and imagery analysis software packages with the JRC 3D Reconstructor®, completely compatible with all terrestrial, mobile and airborne scanners from manufacturers such as Faro, Optech, Riegl, Stonex, Topcon, Trimble and Z+F. Gexcel Srl was established in 2007 from the academic know-how of the University of Brescia and the applied research achievements of the European Joint Research Centre (JRC), located in Ispra (Italy). Gexcel Srl is proud to support all major standard formats such as the ASTM E57 and LAS.


Contact:

arch. Giorgia Rossi
International Sales Manager
Gexcel Srl
+39 030 65 95 001 
Email Contact




Review Article Be the first to review this article
Trimble

Photosat

Featured Video
Jobs
IT Analyst III (GIS) for Orange County Sanitation District at Fountain Valley, CA
CAD Design Specialist I for Waterpik, Inc. at Fort Collins, CO
Upcoming Events
MAGIN's 26th Annual Conference at Michigan Hagerty Conference Center and Park Place Hotel Downtown Traverse City Michigan - Jun 4 - 6, 2017
GEOINT Cesium Exploration Seminar at Henry B. Gonzalez Convention Center 900 E Market St San Antonio TX - Jun 4, 2017
GEOINT 2017 Symposium at 900 E Market St San Antonio TX - Jun 4 - 7, 2017
Teledyne Optech
University of Denver GIS Masters Degree Online
InterDrone2017
CADalog.com - Countless CAD add-ons, plug-ins and more.



Internet Business Systems © 2017 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation TechJobsCafe - Technical Jobs and Resumes  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy