A3 Edge Digital Mapping System Upgrades Oblique Capabilities

Tel Aviv, Israel – May 15, 2015. VisionMap announced today the introduction of upgraded oblique capabilities to its A3 Edge Digital Mapping System. The A3 Edge camera, well known for its high capture productivity, now utilizes a proprietary Roll Stabilization Technology that increases its efficiency even further, particularly for oblique projects.

The A3 Edge camera collects images by means of two telescopes that “sweep” from side to side to create an extremely wide 106° field of view. Each sweep captures oblique and vertical images simultaneously. The new Roll Stabilization Technology shortens the time it takes to complete each sweep, allowing for even faster coverage of the entire area. Productivity is increased for orthophoto, and especially for oblique production.

The A3 Edge Digital Mapping Camera and another oblique camera both surveyed an area of 1400 km2 in Georgia, US.A3 Edge completed the survey in 3.5 hours at 16 cm GSD, collecting vertical and oblique imagery of the entire area, while the other camera took 7.1 hours to cover the area at 25 cm GSD.

VisionMap’s A3 LightSpeed automatically processed the imagery and generated a 16 cm orthophoto in 26 machine hours.The other camera’s imagery required 50 hours of machine processing to generate the 25 cm orthophoto. The huge difference was in the amount of manual work – the other camera required an additional 100 hours of manual processing, whereas the A3 data from LightSpeed required less than 10 hours.

Overall, the highly productive A3 Edge system completed the project over two times faster.

About VisionMap

VisionMap is a leading provider of digital mapping systems. VisionMap offers the A3 family of large format digital mapping cameras designed to address specific needs within the geospatial mapping industry, together with “LightSpeed”, a matching fully automatic ground processing unit.




Review Article Be the first to review this article
Airbus

Featured Video
Jobs
Business Partner Manager for Cityworks - Azteca Systems, LLC at Sandy, UT
GIS Analyst II for Air Worldwide at Boston, MA
Mechanical Engineer for IDEX Corporation at West Jordan,, UT
Senior Structural Engineer for Design Everest at San Francisco, CA
Upcoming Events
SPTechCon 2016, Dec 5 - 8, 2016, San Francisco, CA at San Francisco CA - Dec 5 - 8, 2016
RoboUniverse San Diego at San Diego CA - Dec 14 - 15, 2016
DGI 2017 at QEII Centre London United Kingdom - Jan 23 - 25, 2017
Trimble
Teledyne Optech
University of Denver GIS Masters Degree Online
CADalog.com - Countless CAD add-ons, plug-ins and more.



Internet Business Systems © 2016 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation TechJobsCafe - Technical Jobs and Resumes  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy