Maptek takes a big picture approach to blast management

21 August, 2015 - Maptek will take BlastLogic, mining’s most advanced blast design and management system, to FragBlast 11 in Sydney this month.

BlastLogicenables mines to pre-empt risk and productivity issues before they emerge through instantaneous sharing and visualisation of operational data.

Maptek Blast Accuracy Solutions Manager Mark Roberts says the company is delighted to sponsor the global forum for scientific and technical updates on rock blasting and explosives engineering.

FragBlast is a terrific way for us to connect to the people who use our products,’ Mark says.

‘We’ve developed BlastLogic in collaboration with industry and it is relied on to track, quickly understand and act on all factors impacting drill and blast at critical stages.

‘BlastLogic accelerates the process of creating and implementing accurate blast designs. At the same time it provides measurements and reports on blast execution accuracy.’

Roberts says this is achieved through real-time data integration, reporting and 3D visualisation which can be viewed by users throughout the blast design and execution process.

‘Linking blast designs directly with the geological model and field measurement allows mines to enhance precision in blasting and understand how this impacts downstream processes,’ he says.

‘For example, if you’re looking to optimise fragmentation to improve dig rates and crusher throughput BlastLogic can quickly relate fragmentation results back to blast and geology parameters. The BlastLogic frag modelling tool helps engineers advance future designs and better inform operations of expected post-blast ground conditions.’

Roberts says Maptek is aware mines are increasingly approaching drill and blast with a big-picture perspective of the entire mining process.

‘Customers are integrating drill and blast design with our Vulcan grade control and Eureka drill-hole geophysical interpretation tools in order to validate the resource model and increase the recovery of minerals.

‘Maptek I-Site 3D laser scanning systems are being used to track the accurate extraction of resources and maximise mine safety through remote survey and precision geotechnical analysis.’

Maptek will exhibit at booths 17 and 18 of 11th International Symposium on Rock Fragmentation by Blasting at Sydney’s Sheraton on the Park from August 24 to 26.

About Maptek

Founded more than 30 years ago, Maptek is a leading provider of innovative software, hardware and services for global mining. Maptek solutions are used at more than 1700 sites in 75 countries, with applications across the mining cycle. Maptek develops industry-leading software Vulcan, Eureka, Evolution and BlastLogic for mine evaluation, planning, design, scheduling, operation and rehabilitation. I-Site is integrated hardware and software for 3D laser scanning, surveying and imaging. The spatial data collected can be used for geotechnical analysis, stockpile measurement, design conformance and movement tracking supported by software systems. 
I-Site Studio, Drive, PerfectDig and Sentry.


Contact:

Jane Ball
T +61 8 8338 9222
jane.ball@maptek.com                                        
www.maptek.com

 




Review Article Be the first to review this article
HP

Harris

Featured Video
Jobs
Imagery Analyst for ARA at Albuquerque, NM -1229, NM
Sr. GIS Technical Analyst for Southern California Edison SCE Transmission and Distribution Organization at Rosemead, CA
Inside Sales for SolidCAM at Newtown, PA
Director of Mechanical Engineering for Velodyne LIDAR at Morgan Hill, CA
Architetural Project Manager for DRA Architects at Irvine, CA
Architect for North County Transit District at Oceanside, CA
Upcoming Events
2017 GIS/CAMA Technologies Conference at Chattanooga Convention Center Chattanooga Tennessee - Mar 6 - 9, 2017
IGTF 2017 ASPRS Annual Meeting 2017 at Marriot Waterfront Baltimore Baltimore MD - Mar 11 - 17, 2017
MAPPS Federal Programs Conference at Sheraton Hall Silver Spring Maryland - Mar 13 - 15, 2017
WorldCover 2017 Conference at ESRIN Italy - Mar 14 - 16, 2017
GENEQ
Teledyne:
xponential2017
CADalog.com - Countless CAD add-ons, plug-ins and more.



Internet Business Systems © 2017 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation TechJobsCafe - Technical Jobs and Resumes  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy