Theorem Showcases Its New 2 Into 1 CADverter

29 September 2006, 2 into CADverter developed specifically for UGNX users will be the centrepiece of Theorem Solutions presentation of advanced data translation technology at the forthcoming PLM Europe conference - to be held in Frankfurt between 9th-11th October.

The new Theorem CADVerter addresses the need to maintain collaboration and interoperability throughout extended or complex automotive and aerospace projects as the balance of installed systems slowly changes. Increasingly, UGNX users within the supply chain are required to work with both CATIA V4 and V5 files - in some cases, from the same business partner.

Until recently, this necessitated the use of individual uni- or bi-directional data translators to accommodate the different CATIA formats. Now, Theorem has combined these capabilities in a single CATIA to UGNX CADverter.

As a result, UGNX users will not only be able to take advantage of the convenience of just a single application and one licence to manage, but also the significant initial and recurring cost savings of the new
2 into 1 translator in comparison with two separate products.

Keith Jeacock, Theorem Solutions'; general manager, said: "All Theorem CADverters are renowned throughout the industry as accurate, effective and robust. Now any UGNX user needing to collaborate with supply chain partners within an CATIA environment can benefit from this unique offering. The translator's ability to handle CATIA V4 and V5 data with equal ease makes it an excellent proposition for any UGNX user facing this requirement."

For further information please visit:
http://www.TheoremSolutions.com/pr/pr59.htm


About Theorem Solutions
Theorem Solutions is recognised as one of the world's leaders in CAD/CAM product data exchange, offering application programs for Direct Database conversion and for International Standards-based conversion methods (STEP). The Theorem CADverter family is the widest range of direct CAD translators available from any single source. In addition to CADverter, it includes CADviewer, Data eXchange Navigator (DXN) and CADhealer, all delivering improved communications and interoperability between CAD systems. Theorem's on-line translation service is at www.cadverter.com and information on all its products and services can be found at www.TheoremSolutions.com.

-ENDS-

Editor's note:
For further information please call John Wedrychowski at Theorem Solutions Ltd on: +44 (0)1543 444455 (email: Email Contact) or see Theorem Solutions' Website: www.TheoremSolutions.com.

Editorial contact: Sue Deane at Anderson Burnbreck Ltd on: +44 (0)1242 518399; or e-mail: Email Contact.

Issued on behalf of Theorem Solutions:

Theorem Solutions Ltd                        Theorem Solutions Inc.
Tame House                                        6279 Tri-Ridge Boulevard
Wellington Crescent                                Suite 220
Fradley Park                                        Loveland,
Staffordshire                                        Ohio 45140
WS13 8RX England                        USA
Tel: +44 (0) 1543 444455                Tel:        +1 513 576 1100
Fax: +44 (0) 1543 444454                Fax:         +1 513 576 1110

Rating:


Review Article Be the first to review this article
Teledyne Optech:

Harris

Featured Video
Jobs
Geospatial Analyst - Senior for BAE Systems Intelligence & Security at Springfield, VA
Geospatial Systems Administrator for BAE Systems Intelligence & Security at arnold, MO
Urban Designer - Urban Design/Planning for SERA Architects, Inc at Portland, OR
Upcoming Events
Geospatial World Forum 2018 at Hyderabad International Convention Centre Hyderabad India - Jan 16 - 19, 2018
2018 Annual Convention of Virginia Association of Surveyors at 24 S. Market St Staunton VA - Jan 18 - 20, 2018
ArcGIS: Introduction at Environmental and Natural Resource Building 14 College Farm Rd New Brunswick NJ - Feb 1 - 22, 2018
International LiDAR Mapping Forum at Hyatt Regency 650 15th Street, Denver CO - Feb 5 - 7, 2018
Teledyne Optech
University of Denver GIS Masters Degree Online
CADalog.com - Countless CAD add-ons, plug-ins and more.



Internet Business Systems © 2017 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation TechJobsCafe - Technical Jobs and Resumes  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise