Carbon Design Systems to Participate at ARM Connected Community Technical Symposium

WALTHAM, Mass.—(BUSINESS WIRE)—October 15, 2007— Carbon Design Systems

Who: Carbon Design Systems(TM), the leading supplier of tools for the automatic creation, validation and deployment of virtual hardware models.

What: Will participate in the ARM Connected Community Technical Symposium, one of 19 ARM partners.

When: Tuesday, October 16, 2007

Where: Tokyo Convention Center Shinagawa in Tokyo.

More details can be found at: http://www.arm.com/events/tech_symp_japan.html.

About Carbon Design Systems

Carbon is the leading supplier of system-level tools to automatically create, validate and deploy software models generated from Verilog and/or VHDL descriptions. Carbon's models are used in conjunction with SystemC simulation platforms to enable architecture profiling and software validation in parallel with hardware development. Problems can be found and resolved early in the design cycle, rather than waiting for prototypes to be built or silicon to be delivered. Its solutions are based on open industry standards, including SystemC, SCML, Verilog, VHDL, OSCI TLM, MDI, CASI, CADI and CAPI. Carbon's customers are systems, semiconductor, and IP companies that focus on communications, networking, and consumer electronics. Carbon is headquartered at 375 Totten Pond Road, Waltham, Mass., 02451. Telephone: (781) 890-1500. Facsimile: (781) 890-1711. Email: info@carbondesignsystems.com. Web site: www.carbondesignsystems.com.

Carbon Design Systems is a trademark of Carbon Design Systems Inc. Carbon acknowledges trademarks or registered trademarks of other organizations for their respective products and services.

Contact: Public Relations for Carbon Design Systems Nanette Collins, 617-437-1822 Email Contact



Review Article Be the first to review this article

Harris

Featured Video
Jobs
Senior Mechanical Engineer for BAE Systems Intelligence & Security at Arlington, VA
Geospatial Systems Administrator for BAE Systems Intelligence & Security at arnold, MO
Avionics System Engineer for BAE Systems Intelligence & Security at Arlington, VA
Geospatial Analyst - Senior for BAE Systems Intelligence & Security at Springfield, VA
Sr Mechanical Design Engineer for Medtronic at mounds view, MN
Mechanical Design Engineer 3 for KLA-Tencor at Milpitas, CA
Upcoming Events
Geospatial World Forum 2018 at Hyderabad International Convention Centre Hyderabad India - Jan 16 - 19, 2018
2018 Annual Convention of Virginia Association of Surveyors at 24 S. Market St Staunton VA - Jan 18 - 20, 2018
ArcGIS: Introduction at Environmental and Natural Resource Building 14 College Farm Rd New Brunswick NJ - Feb 1 - 22, 2018
International LiDAR Mapping Forum at Hyatt Regency 650 15th Street, Denver CO - Feb 5 - 7, 2018
Teledyne Optech
University of Denver GIS Masters Degree Online
CADalog.com - Countless CAD add-ons, plug-ins and more.



Internet Business Systems © 2017 Internet Business Systems, Inc.
25 North 14th Steet, Suite 710, San Jose, CA 95112
+1 (408) 882-6554 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation TechJobsCafe - Technical Jobs and Resumes  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy PolicyAdvertise