IMEC & GA Institute of Tech Offer Joint Packaging Program

Leuven, Belgium - October 15, 2007 - The Microsystems Packaging Research Center at the Georgia Institute of Technology (PRC)-Atlanta. Ga., and IMEC invite interested parties from global industry to join their advanced research program on next-generation flip-chip and substrate technology. The program addresses the key 'IC-to-package to board' packaging interconnect issues for 32nm ICs and beyond.

Building on their complementary capabilities, IMEC and Georgia Tech have joined forces by setting up an industrial affiliation program to solve the packaging interconnect gap. Together with their industrial parties, they will explore, develop and invent new solutions to interconnect high-density ICs with very tight I/O pitches (down to 40-20µm peripheral) to low-cost packages and printed circuit boards. The program targets novel packaging approaches to reduce the mechanical stress on the IC after packaging and assembly. These low-stress packaging techniques become indispensable when using Cu/low-k on-chip interconnections, since low-k materials typically have very weak mechanical properties.

The program will provide solutions for the four major barriers to next-generation flip-chip packaging of scaled ICs and ultra-low-k dielectric ICs. Its aim is to explore and develop:

1. Organic package interposer substrates that minimize stress at die and package level and enhance the wiring density, the fine I/O pitch routing capability and the high-frequency signal performance of substrates;
2. A new generation of fine-pitch flip-chip UBM (under-bump metallization) and barrier metallization that meet the electromigration and thermo-mechanical reliability targets of flip-chip scaling;
3. Novel solder and non-solder interconnect approaches including advanced underfill materials and processes to meet future current density, geometry and reliability requirements;
4. Thermo-mechanical modeling, design and verification for improved reliability.

The 2-year program is open for the entire supply chain including system companies, IC manufacturers and assembly houses. Partners can benefit from the complementary expertise of the PRC, a global leader and pioneer in package and system integration, and IMEC, a pioneer of silicon-centric technologies. The extensive state-of-the-art facilities for packaging and semiconductor processing, fabrication and integration at both institutes are major assets of this program.

"We are excited to start this unique open program with PRC where we intend to bring together 20-30 expert researchers from industry and academia worldwide;" said Eric Beyne, Program Director Interconnect, Packaging and Systems Integration at IMEC. "Only by joining expertise and know-how from leading players in the packaging and semiconductor field, we will be able to realize highly reliable solutions beyond the traditional flip-chip interconnections."

"The PRC - IMEC synergy in expertise and facilities in ICs, packages and systems is critical to address the barriers in flip-chip reliability, electromigration, ultra-fine pitch I/O substrates and IC-package interconnections. I believe the IMEC-Georgia Tech team can help the global industry in an unparalleled way," said Prof Rao Tummala, Professor and Director of Georgia Tech PRC.

About IMEC

IMEC is a world-leading independent research center in nanoelectronics and nanotechnology. Its research focuses on the next generations of chips and systems, and on the enabling technologies for ambient intelligence. IMEC's research bridges the gap between fundamental research at universities and technology development in industry. Its unique balance of processing and system know-how, intellectual property portfolio, state-of-the-art infrastructure and its strong network of companies, universities and research institutes worldwide position IMEC as a key partner for shaping technologies for future systems.

IMEC vzw is headquartered in Leuven, Belgium, has a sister company in the Netherlands, IMEC-NL, concentrating on wireless autonomous transducer solutions, and has representatives in the US, China and Japan. Its staff of more than 1500 people includes more than 500 industrial residents and guest researchers. In 2006, its revenue (P&L) was EUR 227 million. Further information on IMEC can be found at

About the PRC

Established in 1994 as a U.S. National Science Foundation Engineering Research Center, the Georgia Institute of Technology Microsystems Packaging Research Center (PRC) is the largest center worldwide dedicated to System-on-Package (SOP) and microsystems packaging technologies. It comprises 7 academic departments, over 500 students, 20 faculty, 15 researchers, and 71 companies from around the world. The PRC offers unique and interdisciplinary degree programs at the B.S., M.S., and Ph.D. levels as well as continuing education in SOP technologies. It also leads several conferences and workshops in packaging research and education.


Katrien Marent,
Corporate Communications,
T: +32 16 28 18 80,
Email Contact

Barbara Kalkis,
Maestro PR,
T : 1 408 996 9975,
Email Contact

Georgia Institute of Technology,
Reed Crouch,
Communications Coordinator / Webmaster,
T: +1 (404) 894-5233 

Review Article Be the first to review this article


Featured Video
SYSTEMS INTEGRATOR for Palm Beach County Human Resources at West Palm Beach, FL
Developer-Support-Implementation Engineer for EDA Careers at San Francisco Area, CA
Solidworks Product Designer for NASCENT Technology at Charlotte, NC
CAD/CAM Regional Account Manager (Pacific Northwest) for Vero Software Inc. at Seattle, WA
Upcoming Events
8th International Summer School on Applied Geoinformatics for Society and Environment: Crisis and Disaster Management at University of Tehran, Kish International Campus Kish Island Iran - Apr 29 - 4, 2017
UGIC CONFERENCE 2017 at Park City Utah - May 8 - 12, 2017
C4ISR Summit 2017 at Armed Forces Officers Club Abu Dhabi United Arab Emirates - May 9 - 10, 2017
InterDrone2017 - Countless CAD add-ons, plug-ins and more.

Internet Business Systems © 2017 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation TechJobsCafe - Technical Jobs and Resumes  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy