Welcome to AECWeekly! I will be in San Francisco at Bentley Systems’ sponsored SmartGeometry 2009 Conference the week of March 25-April 1. See more about the conference in the Announcements section of this newsletter.
AECWeekly is a news magazine featuring important industry news profiles, a summary of recently published AEC product and company news, customer wins, and coming events. Brought to you by AECCafe.
AECWeekly examines select top news each week, picks out worthwhile reading from around the web, and special interest items you might not find elsewhere. This issue will feature Industry News, Top News of the Week, Acquisitions, Agreements, Alliances, Announcements, People, New Products, Around the Web and Upcoming Events.
AECWeekly welcomes letters and feedback from readers, so let us know what you think. Please send me your comments
Susan Smith, Managing Editor
Introducing DoubleCAD XT Pro
By Susan Smith
In Las Vegas last year, IMSI/Design gave journalists and a few others a sneak preview of what was to come: their free DoubleCAD XT product, an AutoCAD LT “work-alike” product that provides some features such as self-healing walls, self-aligning blocks, modern handle-based editing, snap prioritization, brush editor, and smart dimensions. Just released is the company’s DoubleCAD XT Pro, which has all that and much more, at the very low price point of $695.
Click to Enlarge ]
In spite of company optimism, the question remains whether or not users will switch to the less expensive product instead of upgrading to the latest version of AutoCAD LT.
Since its inception in 1988, IMSI has created retail CAD products TurboCAD, DesignCAD, and IDX Renditioner, which have had a strong following.
Click to Enlarge ]
In the area of commands, DoubleCAD XT Pro also has dynamic input that allow users to use virtual snaps. “We’ve tried to make it more readable, so standard options for the tool are on the first line,” said Carter. “Those are going to be the options you’d have when your drawing. The second are polyline properties that would be available from your local menu, so to change how the tool is acting, it makes it little easier to find out what you will need as a subcommand. On the local menu you also have local toolbars that are acting depending on the tool you select. This one changes depending upon which tool you’re currently in mode, and will allow you to pick a similar more appropriate tool. It also gives you views, that are fully customizable, in fact the entire interface is fully customizable, and it’s easy to customize.”
IMSI is a founding member of the Open Design Alliance (ODA) which gives them access to the most current alternative access to DWG. Carter said it will be a number of months before anyone is talking about DWG 2010 compatibility because the ODA itself doesn’t start working on a compatible filter until Autodesk releases their latest version, which will be in a couple of weeks.
Click to Enlarge ]
According to IMSI’s research, the product for most CAD users is the 2D drawing, even though there is great interest in 3D. Carter said that if users take architectural tools from XT Pro into AutoCAD Architecture, they will be able to use architectural objects right away. “We think this is important because a lot of architectural preliminary work is done by draftsmen knocking out a basic design floor plan before you ever get to the full modeling and architectural stuff,” said Carter. “This provides an access point at your conceptual predesign phase so you can get going immediately. All of these objects we’re creating and looking at in 2D are actually also 3D objects that will be represented as such in a 3D drawing program like AutoCAD Architecture. More specifically they have the place holder for the 3D data.”
Users can view 3D models in the application, designed that way for conceptual design. “We’re hitting another side of the conceptual design part where a lot of people are just doing 2D drafting and they don’t need a 3D modeling application. It’s a nice complement to the SketchUp side.”
Mayer noted that they have “very extensive SketchUp support.” A model of Thoreau’s cabin in an SKP file was shown.
“With an SKP file, we respect not only bringing in all the physical geometry, we also bring in all of the layers,” said Mayer. “Every component in SketchUp becomes a block in DoubleCAD and it’s possible to create nested, associative sections (i.e., cross-sections) that maintain your entire management structure from the go. We also bring in all the views, we do one more step -- we assign each view in paperspaces (paper layout) phase so that immediately it drops the view into the space, whether it’s perspective or not perspective it’s retained, and even whether it’s hidden line or not, it’s retained. From this point on you have a number of small drawings so you can start dimensioning and annotating immediately for print out, etc. Or you can modify the paper layout as needed through the block. All of these are block elements that were created in the original walls in the SketchUp model.”
Carter also said users can use 3D models. In XT Pro, there are tools to move from conceptual design to the drafting and detailing of the model. “The Drafting Palette allows you to select any 3D object and immediately begin creating drafting sections for it.” With a model a user takes a cross section, horizontal section or diagonal view of the model and does elevations of the model. XT Pro creates associative 2D sections based on standard views or sectional planes of 3D surface or ACIS solid models, including XREFs. XT Pro also has a full constraint engine, like the one in AutoCAD 2010. The constraint engine is not in AutoCAD LT, however.