ISTAR's Innovative All-Digital Aerial Acquisition and Processing System Establishes New Benchmark for Mapping the Grand Canyon

ISTAR, the leading digital cartographic company, has delivered high-resolution color imagery, high-accuracy digital surface models (DSM), and four separate spectral bands (RGB, NIR) of the Grand Canyon in a single on-time, on-budget mission for the Grand Canyon Monitoring and Research Center (GCMRC). The data was commissioned by the GCMRC to monitor the Canyon’s ecosystem as well as to manage the Colorado River system.

The Grand Canyon’s relief characteristics presented inherent mapping problems that required advanced techniques. Obtaining details and features deep below the canyon walls were the greatest challenges. Escarpment edges seemed impossible to map; shadows and a restricted water flow in the dam also hampered operations, restricting mapping to a limited 10 day window. Up until this point, the GCMCR had not found a satisfactory solution or the necessary technology to solve these problems.

In May 2002, ISTAR’s all-digital airborne imaging system was tested and proved the ideal solution. Operating the HRSC-AX multi-line scanner on a Beech King Air Turboprop, ISTAR acquired multi-spectral and panchromatic data and then processed the information with their proprietary technology that automatically merges multiple data sets through a pixel-by-pixel orthocorrection process. The resulting True Orthoimages are geometrically perfect with absolute vertical accuracy meaning the digital imagery is highly detailed and features are represented at their true location. The high operating altitude prevented interference, which allowed the entire project to be completed in the allotted three month time frame. The 1 kilometer wide by 457 kilometer long area was captured in 147 flight lines.

In order to confirm the positive results, the GCMRC deployed traditional surveying methods to serve as a baseline for comparison. Their GIS laboratory determined that “the new all-digital data either met or exceeded our desired program specifications”. They also stated that “based on initial analysis, the entire data sets meets or exceeds these values”.
“We believe that the 2002 mapping program using this (ISTAR) innovative all-digital aerial sensor and processing system has produced a benchmark data set for the Grand Canyon”, says Steve Mietz. “The GCMRC staff is extremely pleased to achieve this level of accuracy, quality and timeliness in our remote sensing data. Eventually every scientific study in the Grand Canyon will be using this map data. And every study will be effected by this data set for years to come”, he added.

The Water Resources Department of the U.S. Geological Survey (USGS) in Tuscon, Ariz., were the first to use this new data for a field application. “For the first time , we were able to identify debris fans and measure their areas. This was something we hadn’t been able to do with other forms of digital data either because of poor resolution, too much shadowing, or less accuracy”, says Peter Griffiths, USGS Hydrologist. “This year’s data was clearly better, no question”, he added.

ISTAR is a premier cartographic products and services company, specialized in the production of digital geographic databases-imagery, 3D surfaces, and land cover information. ISTAR has produced geospatial data for over 25 million km� of the Earth’s surface. ISTAR’s online HotSpots catalog contains 2,000 cities and regions in more than 100 countries. ISTAR is a subsidiary of EADS, the European Aeronautic Defense and Space Company, which is the second largest aerospace company in the world who yielded over $30 billion in revenue in 2002. EADS business units include Astrium, Airbus, EADS Dornier, Eurocopter, and more.

Contact: Nathalie Pisot, Sales & Marketing
         Email Contact
        Tel: +33 4 97 23 23 23

Review Article Be the first to review this article


Featured Video
SYSTEMS INTEGRATOR for Palm Beach County Human Resources at West Palm Beach, FL
Solidworks Product Designer for NASCENT Technology at Charlotte, NC
Developer-Support-Implementation Engineer for EDA Careers at San Francisco Area, CA
CAD/CAM Regional Account Manager (Pacific Northwest) for Vero Software Inc. at Seattle, WA
Upcoming Events
UGIC CONFERENCE 2017 at Park City Utah - May 8 - 12, 2017
C4ISR Summit 2017 at Armed Forces Officers Club Abu Dhabi United Arab Emirates - May 9 - 10, 2017
8th Electronic Materials and Processes for Space (EMPS) Workshop at Noordwijk Netherlands - May 10 - 12, 2017
Teledyne Optech
InterDrone2017 - Countless CAD add-ons, plug-ins and more.

Internet Business Systems © 2017 Internet Business Systems, Inc.
595 Millich Dr., Suite 216, Campbell, CA 95008
+1 (408)-337-6870 — Contact Us, or visit our other sites:
AECCafe - Architectural Design and Engineering EDACafe - Electronic Design Automation TechJobsCafe - Technical Jobs and Resumes  MCADCafe - Mechanical Design and Engineering ShareCG - Share Computer Graphic (CG) Animation, 3D Art and 3D Models
  Privacy Policy